Scotty rail mounts and adapter - Kayak Fishing Adventures on Big Water’s Edge

kiyo21 · 02-08-2013, 04:50 PM

Does any one have thies? How well do they work, im looking into puting stainless steel rails on my yak and thies wold be great but im afrade if i get bit with it pull the rod holder down and the square one looks good but flimsy.

Do they have them at OEX if they do ill go down to ss beach and check them out

Sdspeed · 02-08-2013, 06:04 PM

Quote:

Originally Posted by kiyo21

Does any one have thies? How well do they work, im looking into puting stainless steel rails on my yak and thies wold be great but im afrade if i get bit with it pull the rod holder down and the square one looks good but flimsy.

Do they have them at OEX if they do ill go down to ss beach and check them out

OEX has 3 pages , not sure what your looking for?

http://www.kayakfishingsupplies.com/...ers/Categories

kiyo21 · 02-08-2013, 09:18 PM

Looking to see what others think of these

http://www.scotty.com/fishing-gear-e...ail-mounts.htm

i want them but if i get bit i don't want it to move on the rail

Biggameaddict · 02-08-2013, 09:23 PM

Quote:

Originally Posted by kiyo21

Looking to see what others think of these

http://www.scotty.com/fishing-gear-e...ail-mounts.htm

i want them but if i get bit i don't want it to move on the rail

See the two little screws? Thats what will keep it from slipping on the rail.

Biggameaddict · 02-08-2013, 10:03 PM

How do you plan on putting a rail on anyway?

Iceman · 02-09-2013, 07:31 AM

I don't have any Scotty rail mounts right now, I do have RAM rail mounts though. Either one is very secure.

JarrodMc · 02-09-2013, 09:50 AM

Hey Iceman, have you used these? No 438.
http://www.scotty.com/fishing-gear-e...headmounts.htm
I have track on my yak that I'd like to use. Either these or the Ram balls.

kiyo21 · 02-09-2013, 05:32 PM

Quote:

Originally Posted by Biggameaddict

See the two little screws? Thats what will keep it from slipping on the rail.

Ya i know but i was wondering if anyone has tryed them and fond anthing wrong the set screws are good but some times the still tend to move under pressure and even leave deep gouges on the pipe

And i wanna put some stainless steel railing around my yak well just 2-3' where the seat is and one bar accross infront of me on a t-13

Iceman · 02-09-2013, 06:20 PM

Quote:

Hey Iceman, have you used these? No 438.
http://www.scotty.com/fishing-gear-e...headmounts.htm
I have track on my yak that I'd like to use. Either these or the Ram balls.

That is the first I have seen the Scotty track mounts.............cool.

Biggameaddict · 02-09-2013, 09:47 PM

Quote:

Originally Posted by kiyo21

Ya i know but i was wondering if anyone has tryed them and fond anthing wrong the set screws are good but some times the still tend to move under pressure and even leave deep gouges on the pipe

And i wanna put some stainless steel railing around my yak well just 2-3' where the seat is and one bar accross infront of me on a t-13

What kind of mounts are you using?

kiyo21 · 02-09-2013, 10:25 PM

Quote:

Originally Posted by Biggameaddict

What kind of mounts are you using?

Right now just one scotty flush mount that the yak came with its on my rod pod hatch. Thats why i wanna have rails is so before going and making holes i wanna see how i can adjust the rail mounts how ever i want anywhere i want i think that would be the shit

Siebler · 02-10-2013, 08:19 AM

Quote:

Originally Posted by Iceman

That is the first I have seen the Scotty track mounts.............cool.

Ice, We have these in Stock. Remember Roy showed them to us up at OR. I will make sure Brent brings you some.

Also Scotty has a Composite Track coming out, YakAttack has also released their new lower priced track, the GT90SL (in 6 colors).

Another option for rail mount would be to do a Gear Track on the rail, we have these in stock as well and can send up to SSB....

On a Trident I would just put some GT90's, no rail. Keep everything low and clean!

02-08-2013, 04:50 PM	#1
kiyo21 Senior Member Join Date: Aug 2012 Location: Chino CA Posts: 202	Scotty rail mounts and adapter Does any one have thies? How well do they work, im looking into puting stainless steel rails on my yak and thies wold be great but im afrade if i get bit with it pull the rod holder down and the square one looks good but flimsy. Do they have them at OEX if they do ill go down to ss beach and check them out

02-08-2013, 10:03 PM	#5
Biggameaddict The Kayak Peddler Join Date: Aug 2012 Location: North Hollywood Posts: 591	How do you plan on putting a rail on anyway? __________________ Keep your rod close, your gaff closer, and your paddle on a leash.

02-09-2013, 07:31 AM	#6
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,943	I don't have any Scotty rail mounts right now, I do have RAM rail mounts though. Either one is very secure. __________________

02-08-2013, 09:18 PM	#3
kiyo21 Senior Member Join Date: Aug 2012 Location: Chino CA Posts: 202	Looking to see what others think of these http://www.scotty.com/fishing-gear-e...ail-mounts.htm i want them but if i get bit i don't want it to move on the rail

02-09-2013, 09:50 AM	#7
JarrodMc Senior Member Join Date: Nov 2012 Location: Vista Posts: 411	Hey Iceman, have you used these? No 438. http://www.scotty.com/fishing-gear-e...headmounts.htm I have track on my yak that I'd like to use. Either these or the Ram balls.