Share Your Innovations - Page 26 - Kayak Fishing Adventures on Big Water’s Edge

jorluivil · 05-15-2014, 06:52 PM

Quote:

Originally Posted by alanw

This ain't a legit innovation without cable-ties.

Here ya go

chxh8me · 05-16-2014, 08:00 AM

Quote:

Originally Posted by jorluivil

So.....here's my latest innovation/build. I put it together but Tony is the one that deserves most if not all of the credit.

Nice. I was looking into doing the same exact thing recently, but took the lazy route and grabbed a portable washer off ebay for $100.

What did you power it with? SLA battery or car cigarette adapter? Can't tell from the pic, but it looks like its got the connector for a battery.
edit*** nevermind, just saw the pic you posted above.

Mine came with a car adapter only which is fine for now, but I want to rig up a female cigarette lighter adapter so I can run it off an extra SLA battery I have.

jorluivil · 05-16-2014, 08:22 AM

Quote:

Originally Posted by chxh8me

Nice. I was looking into doing the same exact thing recently, but took the lazy route and grabbed a portable washer off ebay for $100.

What did you power it with? SLA battery or car cigarette adapter? Can't tell from the pic, but it looks like its got the connector for a battery.
edit*** nevermind, just saw the pic you posted above.

Mine came with a car adapter only which is fine for now, but I want to rig up a female cigarette lighter adapter so I can run it off an extra SLA battery I have.

My primary source will be my LiFeP04 battery. I am in the process of rigging something that will help me run the wash down system off of my truck battery, it'll be something simple like a cord running to the lighter but I will only use this if I need to preserve the battery life on my LiFeP04 battery.

cell128 · 05-16-2014, 12:23 PM

First innovation on my outback. Mini cutting board because I don't wanna cut holes on my yak lol

Sent from my SCH-I545 using Tapatalk

momo fish · 05-16-2014, 01:24 PM

Nice idea. What did you use and how is it attached?

cell128 · 05-17-2014, 04:19 AM

Quote:

Originally Posted by momo fish

Nice idea. What did you use and how is it attached?

I bought the cutting board from 99 cent store and cut it to size with my skilsaw. Glued on with liquid nails i have left over from home depot. Its on solid.

Sent from my SCH-I545 using Tapatalk

jorluivil · 05-17-2014, 05:08 AM

Quote:

Originally Posted by cell128

I bought the cutting board from 99 cent store and cut it to size with my skilsaw. Glued on with liquid nails i have left over from home depot. Its on solid.

Sent from my SCH-I545 using Tapatalk

Liquid nails? You used construction adhesive on your kayak?

cell128 · 05-17-2014, 08:30 AM

Quote:

Originally Posted by jorluivil

Liquid nails? You used construction adhesive on your kayak?

Oh oh is that bad? It's only on the hatch part. I can probably still take it off

Sent from my SCH-I545 using Tapatalk

William Novotny · 05-17-2014, 10:09 AM

Quote:

Originally Posted by cell128

Oh oh is that bad? It's only on the hatch part. I can probably still take it off

Sent from my SCH-I545 using Tapatalk

You gotta be carefully with chemical adhesives and poly plastics. Could cause a reaction

wiredantz · 05-18-2014, 10:50 AM

Quote:

Originally Posted by jorluivil

So.....here's my latest innovation/build. I put it together but Tony is the one that deserves most if not all of the credit.

How much did that run you.?

jruiz · 05-20-2014, 08:26 PM

Quote:

Originally Posted by cell128

Oh oh is that bad? It's only on the hatch part. I can probably still take it off

Sent from my SCH-I545 using Tapatalk

If it sticks then it should be ok. PE and PP are one of the most inert and chemically stable materials out there. Just to paint a picture, they store very strong acides in PE bottles.

cell128 · 05-20-2014, 08:29 PM

Quote:

Originally Posted by jruiz

If it sticks then it should be ok. PE and PP are one of the most inert and chemically stable materials out there. Just to paint a picture, they store very strong acides in PE bottles.

Thanks. It held very well and I can cut up squid a lot easier than. On the wet cardboard it comes in.

Sent from my SCH-I545 using Tapatalk

alanw · 05-20-2014, 09:21 PM

Quote:

Originally Posted by jruiz

If it sticks then it should be ok. PE and PP are one of the most inert and chemically stable materials out there. Just to paint a picture, they store very strong acides in PE bottles.

Random useless information: Some surgical mesh like that used for hernia repair is made from PP partly because it is inert and stable in the body. I may or may not be part human, part kayak.

jorluivil · 05-20-2014, 11:26 PM

lets see if I remember.....

$140 for the pump (westmarine 4.0 GPM washdown pump)
$75 for tank (tank-depot 7 gallon flat bottom tank)
$50 additional parts (polyethylene glue, elbows, etc)

I know I know, its a bit pricey. Some guys are probably saying, 'no effen way I'm paying $300 for a wash down system when I could buy one for $30'. To those that may say that I say......................enjoy your insecticide sprayer.

cell128 · 05-21-2014, 03:55 AM

Quote:

Originally Posted by alanw

Random useless information: Some surgical mesh like that used for hernia repair is made from PP partly because it is inert and stable in the body. I may or may not be part human, part kayak.

Regardless of this my kayak hasn't exploded yet but if it doss I hope its in my garage lol. next time I glue anything it will be marine goop. That's what I wanted to use but just didn't have it at the time.

Sent from my SCH-I545 using Tapatalk

mrJB · 05-21-2014, 02:05 PM

Getting tired of snagging sabiki, treble, and most other hooks on the side pockets. First prototype (out of cutting board plastic).

We'll see...

P5210004.jpg

William Novotny · 05-21-2014, 02:11 PM

Quote:

Originally Posted by jorluivil

lets see if I remember.....

$140 for the pump (westmarine 4.0 GPM washdown pump)
$75 for tank (tank-depot 7 gallon flat bottom tank)
$50 additional parts (polyethylene glue, elbows, etc)

I know I know, its a bit pricey. Some guys are probably saying, 'no effen way I'm paying $300 for a wash down system when I could buy one for $30'. To those that may say that I say......................enjoy your insecticide sprayer.

Go detail a few cars with that thing and it'll pay for itself

octico · 05-22-2014, 02:07 PM

Quote:

Originally Posted by mrJB

Getting tired of snagging sabiki, treble, and most other hooks on the side pockets. First prototype (out of cutting board plastic).

We'll see...

Attachment 12475

That is really cool! I keep having the same problem 99cent store here I come.

Zfish03 · 05-24-2014, 11:54 AM

I'm tired of sucking up eel grass, whale semen, and whatever else is floating around in LJ...So I found a solution on here.
I know this has been done before, but I remember the previous post had the mesh screen inside the end of bottom black piece. I thought this method was much more easy to do instead trying to form and shove the mesh inside the black piece. Works great!

DanaPT · 05-24-2014, 01:51 PM

OR nylon lint trap 2 pack. $1.79

Works excellent.

05-20-2014, 11:26 PM	#514
jorluivil Senior Member Join Date: Apr 2010 Posts: 6,855	lets see if I remember..... $140 for the pump (westmarine 4.0 GPM washdown pump) $75 for tank (tank-depot 7 gallon flat bottom tank) $50 additional parts (polyethylene glue, elbows, etc) I know I know, its a bit pricey. Some guys are probably saying, 'no effen way I'm paying $300 for a wash down system when I could buy one for $30'. To those that may say that I say......................enjoy your insecticide sprayer. __________________ www.facebook.com/Teamsewer Last edited by jorluivil; 05-21-2014 at 12:20 AM.

05-21-2014, 02:05 PM	#516
mrJB Senior Member Join Date: Feb 2007 Location: O.C. Posts: 352	Hobie Pockets Getting tired of snagging sabiki, treble, and most other hooks on the side pockets. First prototype (out of cutting board plastic). We'll see... P5210004.jpg __________________ "I Brake for Halibut"

05-16-2014, 12:23 PM	#504
cell128 lizard king Join Date: Mar 2014 Location: Lakewood Posts: 520	First innovation on my outback. Mini cutting board because I don't wanna cut holes on my yak lol Sent from my SCH-I545 using Tapatalk

05-16-2014, 01:24 PM	#505
momo fish Senior Member Join Date: Mar 2013 Location: Camarillo Posts: 1,491	Nice idea. What did you use and how is it attached?

05-24-2014, 11:54 AM	#519
Zfish03 Senior Member Join Date: Dec 2011 Location: Oceanside Posts: 197	I'm tired of sucking up eel grass, whale semen, and whatever else is floating around in LJ...So I found a solution on here. I know this has been done before, but I remember the previous post had the mesh screen inside the end of bottom black piece. I thought this method was much more easy to do instead trying to form and shove the mesh inside the black piece. Works great!

05-24-2014, 01:51 PM	#520
DanaPT Senior Member Join Date: Sep 2010 Location: South OC Posts: 1,605	OR nylon lint trap 2 pack. $1.79 Works excellent.