Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion

Reply
 
Thread Tools Display Modes
Old 10-21-2014, 09:48 AM   #1
spudz
Member
 
Join Date: Apr 2006
Location: SoCal
Posts: 78
Saltwater/Fresh water Transducers?

Picked up a Lowrance Elite 4 HDI, that I intend upon using between 2 kayaks for ocean fishing. Plan on picking up an additional transducer so that I can swap out the monitor/battery between the two kayaks and not worry about having to swap out the transducer.

Sent Lowrance an e-mail about which transducer (model #) do I need to purchase to run on the Elite 4 HDI:

From: Lowrance Products
Sent: Tuesday, October 21, 2014 8:03 AM
To: Eddie
Subject: Re: Form data from "ContactFormLowranceGeneral" (Lowrance) [#375863]


Thank you for your inquiry.
We have 2 transducers, one for fresh water which is part# 000-10976-001 and one for salt water which is part# 000-10977-001. Both can be purchased from store.navico.com.

Thank you for choosing Navico products!
Navico Technical Support



I may be asking silly questions, But I’d like to know if anyone would enlighten me about the difference between a saltwater and fresh water transducer? I’ve sent Lowrance an email inquiring about the difference between the two in addition to my questions below – awaiting their response. I didn’t know there is a saltwater & fresh water transducer. I fish saltwater, what happens if I use a freshwater transducer in saltwater? Which transducer is included with the Elite 4 HDI? I don’t recall anywhere on the box indicating a fresh water/salt water model.

Thanks in advance!
Eddie

Last edited by spudz; 10-21-2014 at 01:10 PM.
spudz is offline   Reply With Quote
Old 10-21-2014, 11:35 AM   #2
spudz
Member
 
Join Date: Apr 2006
Location: SoCal
Posts: 78
Did a little bit more snooping. Boils down to depth you're fishing, not salt vs fresh water...
Under 100 M/328' use 83/200 KHz
Greater than 100 M/328' use 50/200 KHz
?

Last edited by spudz; 10-21-2014 at 12:12 PM.
spudz is offline   Reply With Quote
Old 10-21-2014, 01:17 PM   #3
TJones
Senior Member
 
TJones's Avatar
 
Join Date: Jan 2012
Posts: 2,522
After

Peace
Attached Images
File Type: jpg image.jpg (48.1 KB, 153 views)

Last edited by TJones; 10-21-2014 at 01:18 PM. Reason: Wrong post
TJones is offline   Reply With Quote
Old 10-21-2014, 06:14 PM   #4
GregAndrew
Senior Member
 
Join Date: Mar 2009
Posts: 2,384
Spudz, you should probably go with the same transducer that you already have. That way you will not have to fiddle with your FF settings every time you switch yaks. The average user is not going to see almost any difference between the two. The exceptions would be if you do a lot of deep rockfishing, or you prefer the cone angle of one over the other.
GregAndrew is offline   Reply With Quote
Old 10-22-2014, 07:11 AM   #5
Iceman
Administrator
 
Iceman's Avatar
 
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,943
99% of kayak fishermen would be fine with the fresh 83/200 vs the salt 50/200 I am one of the 99%. The 50/200 is massive in size, costs about $100 more and uses more power.
__________________
Iceman is offline   Reply With Quote
Old 10-22-2014, 07:23 AM   #6
ful-rac
Emperor
 
ful-rac's Avatar
 
Join Date: May 2009
Location: Buena Park
Posts: 3,649
__________________
There's nothing colder than yesterday's hotdog.
ful-rac is offline   Reply With Quote
Old 10-22-2014, 07:48 AM   #7
Iceman
Administrator
 
Iceman's Avatar
 
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,943
Quote:
I don’t recall anywhere on the box indicating a fresh water/salt water model.
you are correct, they do not label them as salt and fresh.

__________________
Iceman is offline   Reply With Quote
Old 10-23-2014, 07:36 AM   #8
spudz
Member
 
Join Date: Apr 2006
Location: SoCal
Posts: 78
Here’s Lowrance’s response:

From: Lowrance Products
Sent: Wednesday, October 22, 2014 7:43 AM
To: Falch, Eddie
Subject: Re: Form data from "ContactFormLowranceGeneral" (Lowrance) [#375863]


Thank you for your inquiry.

The box will not show any difference but if you fish salt water you will want a 50/200 455/800 transducer and for fresh water you will want 83/200 455/800 transducer.

Thank you for choosing Navico products!
Navico Technical Support

Navico Inc.
Lowrance website: http://www.lowrance.com
Accessories website: http://store.navico.com


IMPORTANT NOTICE: The information in this transmission is privileged and confidential, and is intended only for the recipient(s) listed above. If you are neither the intended recipient(s) nor a person responsible for the delivery of this transmission to the intended recipient(s), you are hereby notified that any unauthorized distribution or copying of this transmission is prohibited. This email is not intended, nor shall it be deemed, unless otherwise expressly provided in writing to contain my electronic signature.

I don’t know why they differentiated the two transducers by salt vs fresh water instead of explaining the performance difference between the two.

Iceman, GregAndrew and Ful-rac,
Thanks for your advice and input. The transducer that came with the Lowrance I have is the 83/200. No need to spend extra money and power for a 50/200 – I too am part of that 99% and I’ll get an additional 83/200 and all will be good.

TJones… nice yellowtail fillets!
spudz is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 12:35 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.