Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion
Home Forum Online Store Information LJ Webcam Gallery Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Display Modes
Old 12-14-2017, 02:47 PM   #1
Saba Slayer
Senior Member
 
Saba Slayer's Avatar
 
Join Date: May 2007
Location: Palos Verdes
Posts: 1,837
How...?

Quote:
Originally Posted by Raskal311 View Post
Speaking from someone who owned a torqeedo evolve (two actially), rear mounting a motor on a Pa or Compass is the way to go hands down. Swapping the drive and motor in and out is a pain in the ass and having to store one while you use the other is an even bigger pain.
I've been using electric motors on kayaks for a number of years and it's always seemed easier for me to deal with a fishing line caught on the motor/prop when the motor/prop was accessible (ie. mid kayak as opposed to in the rear)...especially since I do most of my kayak fishing solo. Getting braid line caught in the prop is a whole other conversation...
Without a prop on the Bixpy my concern is still getting the line snagged somewhere on the drive when it's in the rear of the yak and inaccessible to a solo angler...
What are your thoughts...Raskal...?
__________________
Jim / Saba Slayer

Saba Slayer is offline   Reply With Quote
Old 12-14-2017, 08:19 PM   #2
jruiz
Large Member
 
Join Date: Jul 2012
Location: La Verne, CA
Posts: 1,002
Quote:
Originally Posted by Saba Slayer View Post
I've been using electric motors on kayaks for a number of years and it's always seemed easier for me to deal with a fishing line caught on the motor/prop when the motor/prop was accessible (ie. mid kayak as opposed to in the rear)...especially since I do most of my kayak fishing solo. Getting braid line caught in the prop is a whole other conversation...
Without a prop on the Bixpy my concern is still getting the line snagged somewhere on the drive when it's in the rear of the yak and inaccessible to a solo angler...
What are your thoughts...Raskal...?
I remember when i went out with Frank to rocky point and he got his line caught in his prop on his rear mounted torqueedo on his trident. He was a sitting duck until I could finish with what I was doing and untangle the line from his prop. He would probably be still out there today if it wasn't for me. You're welcome Frank.
jruiz is offline   Reply With Quote
Old 12-15-2017, 02:10 AM   #3
Raskal311
Senior Member
 
Raskal311's Avatar
 
Join Date: Mar 2011
Location: Santa Ana/Westminster
Posts: 1,256
Quote:
Originally Posted by Saba Slayer View Post
I've been using electric motors on kayaks for a number of years and it's always seemed easier for me to deal with a fishing line caught on the motor/prop when the motor/prop was accessible (ie. mid kayak as opposed to in the rear)...especially since I do most of my kayak fishing solo. Getting braid line caught in the prop is a whole other conversation...
Without a prop on the Bixpy my concern is still getting the line snagged somewhere on the drive when it's in the rear of the yak and inaccessible to a solo angler...
What are your thoughts...Raskal...?
Yep that's a very good point, I'm very careful and in the 2ish years I've ran the torqeedo I've only gotten braid in it once. Had to peddle back that day, wasn't fun lol. With the motor at mid ship getting the line stuck in the property is going to be much higher. I've had more issues with running over loose kelp (mostly at night). Pulling the moter up and down a few times typically gets it off but occasionally I will have to craw back there to clean it off; a telescopic galf helps too. Fishing around kelp being about to pull the motor out of the water and putting it back in within a second simply by pulling a rope vs pulling out the entire drive is actually more convenient. Now pulling the motor on a torqeedo evolve out of the well isn't quick and easy due to th prop, the bixpy on the other hand is probably much easier. All that said I still feel strongly that rear mount is the way to go but my perspective is based on my fishing style.
__________________
Kevin
Yellow PA12

Last edited by Raskal311; 12-15-2017 at 02:25 AM.
Raskal311 is offline   Reply With Quote
Old 05-12-2018, 10:31 AM   #4
BigIslandFishing
Junior
 
Join Date: May 2018
Posts: 2
Bixpy Jet

I put the rudder mounted bixpy jet on my hobie rev 11. I took a fishing class and found the distances to get far enough out where the fish are to be a little challenging at my age, especially going against the current or wind.

The rudder mount fits perfectly, basically replacing the Hobie rudder wiht a stubby rudder and quick release system for mounting/removing the bixby jet unit itself. After adjusting the tightening screw a bit on the twist and stow rudder, it retracts and deploys nicely. The newly designed outboard battery is fairly light and fits under my vantage seat with one short extension cable. The jet has 3 speeds and reverse. I have not yet taken the kayak out yet, but I also bought the swim jet battery that attaches to the same jet unit, and I took that out in the ocean snorkeling.

The swim jet configuration has 3 speeds and is powerful on high speed. You need to hold on with two hands if you run on high speed very long. I got the bigger swim jet battery. I had a problem with the swim battery itself and Bixpy was extremely prompt and replaced the swim battery immediately at no cost to me, no shipping cost either.

The price of this system is low enough compared with the Hobie system, that you can buy an extra battery for the kayak and come out about even. One thing for sure, the bixpy system is much more flexible and versatile than what Hobie offers.

(duplicate post)
BigIslandFishing is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 10:28 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.