|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
|
Thread Tools | Display Modes |
|
07-11-2016, 07:14 AM | #1 |
Senior Member
Join Date: Mar 2014
Location: Newport Beach
Posts: 219
|
Best bet of all....., take it OEX in Sunset Beach and let Andy install it for you. He does a great job. I've had him install three over the years, and have never had one installation fail. When in doubt, use the services of a professional. It may cost a few bucks more, but at least then you're guaranteed good results. Nothing worse than getting out on the water and have electrical 'issues' with your electronics. That can ruin a fun day out on the water real quick....
__________________
Here fishy, fishy, fishy..... |
07-11-2016, 01:50 PM | #2 |
Senior Member
Join Date: Jan 2013
Location: Otay
Posts: 704
|
With the change you find in your couch, you can purchase a brick of duct seal. It's a plumbers putty. No drilling, no wet puddle mounting, and it won't lose its tackiness because it's made to withstand moisture. Used it for years with no complaints.
Best of luck! Jay |
07-11-2016, 06:08 PM | #3 |
Senior Member
Join Date: Aug 2015
Location: Agoura Hills
Posts: 166
|
Anyone have pics of their electrical putty/duct seal install?
I tried twice, and each time the putty got softened in the sun on the way home and the whole shebang fell off the inside of my hull. Andy |
07-12-2016, 01:13 PM | #4 |
Senior Member
Join Date: Mar 2005
Location: Leucadia, CA
Posts: 261
|
Hi Andy, if you have a Hobie it's pretty straight forward. Attach the transducer to the transom mount bracket. Then a couple of long bolts and a reel clamp of the right size. Clamp it to the sail mast downtube below decks. A thin coat of putty so there is no air gap between the transducer and hull.
I have moved mine to under the seat so it is out of the way. This method doesn't depend on having the Hobie downtube. If you need to see this, I can see if I can get under there and take a picture. It requires a little bit of MacGyver finesse. I have had no trouble with either method because they don't depend on the putty to hold the transducer in place. ~~~Pete~~~ |
07-12-2016, 02:20 PM | #5 | |
Senior Member
Join Date: Aug 2015
Location: Agoura Hills
Posts: 166
|
Quote:
How did you mount the ducer under the seat? Andy |
|
07-13-2016, 01:03 PM | #6 |
Senior Member
Join Date: Mar 2005
Location: Leucadia, CA
Posts: 261
|
Hi Andy, this started out as a wet well. When it sprung a leak after a couple of years, I decided to convert it to a putty install.
I took a PVC electrical box from Home Depot and used my Dremel tool to carve out the bottom. I want the transducer to sit right against the hull. I then Gooped the box to the hull under the seat. The hull is flat here so it is an easy install. I drilled a hole through the box so the screw you see holds the transducer. The screw height should be such that the transducer sits flat against the hull. Here is the inside view. You can see the putty around the bottom of the transducer. You want a thin layer and no air gaps between the transducer and the hull. For extra measure, I put a slice of pool noodle on top of it. So when I put the lid on the box, the transducer is doubly secured. I like having the transducer out of the way. I hadn't opened the box since last year. Today I see the transducer is still very stuck to the hull. I have my battery in the back hatch. This frees up the front hatch area for storing rods, reels, and big . ~~~Pete~~~ |
07-13-2016, 01:12 PM | #7 |
Senior Member
Join Date: Aug 2015
Location: Agoura Hills
Posts: 166
|
Excellent Pete, thanks!
Andy |
07-12-2016, 02:10 PM | #8 |
Senior Member
Join Date: Mar 2015
Location: Hacienda Heights, CA
Posts: 427
|
Are you transporting upside down? Might need to rough up the surface a bit to create better adhesion, but I have no experience with it.
|
07-12-2016, 02:17 PM | #9 |
Senior Member
Join Date: Aug 2015
Location: Agoura Hills
Posts: 166
|
Thanks guys! Yes I had the ducer mounted under my seat and also transported the kayak upside down.
I think I'll mount the ducer to the mast downtube as suggested, then putty it in, and mount the battery under the seat. Due to steep slopes and staircases I like to bring my Revo 11 from my truck to the water upside down on my head, like portaging a canoe. With the battery under the seat it will balance better. Andy |
|
|