Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion

Reply
 
Thread Tools Display Modes
Old 12-05-2018, 01:49 PM   #1
Edwardduran117
Member
 
Join Date: Apr 2017
Location: Orange County, CA
Posts: 34
Custom Reel Clamp Trinidad Avet Torium Updated!

Hello BWE,

I have now finished all the clamps for Trinidad 14-20 Silver Models,Avet SX MX JX LX, Torium 14, Saltist BG 15-40, and Okuma Makaira 15-50 models.I have received very positive feedback on the clamps and have made quite a few of each model. I will be selling the clamp alone with washers for the user to be able to adjust to smaller rod diameters. All clamps were tested on stock hardware provided by the manufacture. I would appreciate any feedback as it is my first time selling these clamps. I plan on making more models and will keep everyone updated. All clamps are $20 and I also offer custom engraving for $10. I will be doing free shipping for those who order 3 or more clamps. Payments will be done via paypal or venmo and are responsible for any associated fees. will be using flat rate envelopes for shipping which is $6.55 also local pickup in Tustin. Please PM me the reel model, quantity, email address, and shipping address if interested in the clamps. Thank you all for the support!
Attached Images
File Type: jpg IMG_1224.jpg (39.6 KB, 76 views)
File Type: jpg IMG_1214.jpg (49.2 KB, 76 views)
File Type: jpg IMG_1217.jpg (34.4 KB, 75 views)
File Type: jpg IMG_1218.jpg (48.8 KB, 76 views)
File Type: jpg IMG_1220.jpg (44.2 KB, 73 views)

Last edited by Edwardduran117; 12-09-2018 at 02:05 PM.
Edwardduran117 is offline   Reply With Quote
Old 12-06-2018, 07:35 AM   #2
goldenglory18
Senior Member
 
goldenglory18's Avatar
 
Join Date: Feb 2015
Location: Seattle Area
Posts: 861
Awesome Ed!

I'm in aerospace manufacturing and totally see a marketplace for more/better/creative clamps and reel seats.

What grade Al are you using?
goldenglory18 is offline   Reply With Quote
Old 12-06-2018, 07:53 AM   #3
Edwardduran117
Member
 
Join Date: Apr 2017
Location: Orange County, CA
Posts: 34
Thanks man! I plan on making plenty new designs and models coming this week! I’m just using 6061 Al. I’ll be updating this weekend making clamps for Avets and Trinidad’s so they will be up soon!
Edwardduran117 is offline   Reply With Quote
Old 12-06-2018, 07:56 AM   #4
cris
Senior Member
 
Join Date: Feb 2016
Location: Los Angeles
Posts: 254
These are super awesome! I'm curious to see what else you come up with!
cris is offline   Reply With Quote
Old 12-06-2018, 08:03 AM   #5
Edwardduran117
Member
 
Join Date: Apr 2017
Location: Orange County, CA
Posts: 34
Thanks Cris! I have high hopes for this project and going to make some quality clamps! I’ll keep everyone up to date with new models!
Edwardduran117 is offline   Reply With Quote
Old 12-06-2018, 08:16 AM   #6
YakDout
Brandon
 
YakDout's Avatar
 
Join Date: Jul 2011
Location: San Diego
Posts: 2,345
Quote:
Originally Posted by Edwardduran117 View Post
Thanks Cris! I have high hopes for this project and going to make some quality clamps! I’ll keep everyone up to date with new models!

Great looking work.

I would also suggest making longer clamps that grab more surface area of the rod for jigsticks. I wouldnt think cork puppy has proprietary market on this but something to look into for sure. Most of my rods do not have reel seats if that gives you an idea as to how many more you could sell if you made the longer ones.
YakDout is offline   Reply With Quote
Old 12-06-2018, 08:35 AM   #7
Edwardduran117
Member
 
Join Date: Apr 2017
Location: Orange County, CA
Posts: 34
Thanks! For now I plan to make clamps more for rods with reel seats but I have some plans and designs for jigsticks without reel seats ergonomics would be my main focus for a clamp like that. Thank you for your input Brandon i appreciate it helps keep me motivated to make new things!
Edwardduran117 is offline   Reply With Quote
Old 12-07-2018, 02:46 PM   #8
goldenglory18
Senior Member
 
goldenglory18's Avatar
 
Join Date: Feb 2015
Location: Seattle Area
Posts: 861
Quote:
Originally Posted by YakDout View Post
I would also suggest making longer clamps that grab more surface area of the rod for jigsticks. I wouldnt think cork puppy has proprietary market on this but something to look into for sure. Most of my rods do not have reel seats if that gives you an idea as to how many more you could sell if you made the longer ones.
There is more of a market place for this than anything. Deckhand jigsticks are becoming more and more popular in SoCal, especially for guys like me that want to cheaply rebuild classic rods like Calstars and Seekers.

You figure out how to get an SXJ firmly onto a deckhand jigstick and you've got a winner...
goldenglory18 is offline   Reply With Quote
Old 12-08-2018, 12:00 PM   #9
Hunters Pa
Senior Member
 
Join Date: Jul 2006
Location: Fullerton
Posts: 1,357
Don’t limit your market. Can use that loop to hook a jig or hook, avoiding the need to attach to reel or rod eye.
Hunters Pa is offline   Reply With Quote
Old 12-08-2018, 12:36 PM   #10
Edwardduran117
Member
 
Join Date: Apr 2017
Location: Orange County, CA
Posts: 34
It’s perfect for all those things! Makes it easy to put hooks and lures through. Just a standard clamp with a little extra for whenever you need it
Edwardduran117 is offline   Reply With Quote
Old 12-08-2018, 12:38 PM   #11
cris
Senior Member
 
Join Date: Feb 2016
Location: Los Angeles
Posts: 254
If you added a symmetrical loop on the other side you could use one for a leash and one for a lure. I haven’t seen one with two loops yet.

I hate when my hooks get caught on the leash.
cris is offline   Reply With Quote
Old 12-08-2018, 12:42 PM   #12
Edwardduran117
Member
 
Join Date: Apr 2017
Location: Orange County, CA
Posts: 34
I was thinking that too but the protruded slot gets in the way of wrapping your hand around comfortably. But always looking to improve the design I’m sure I’ll come up with some new stuff. Especially being a kayaker I know some of the struggles of a kayak lol
Edwardduran117 is offline   Reply With Quote
Old 12-08-2018, 02:22 PM   #13
cris
Senior Member
 
Join Date: Feb 2016
Location: Los Angeles
Posts: 254
Ah yes good point. Do you have a CNc machine?
cris is offline   Reply With Quote
Old 12-08-2018, 02:37 PM   #14
Edwardduran117
Member
 
Join Date: Apr 2017
Location: Orange County, CA
Posts: 34
Yeah my dad has a machine shop and we’re a little slow so I need to take advatange and make some parts!
Edwardduran117 is offline   Reply With Quote
Old 12-08-2018, 04:55 PM   #15
cris
Senior Member
 
Join Date: Feb 2016
Location: Los Angeles
Posts: 254
Nice! I don't have access to a machine shop but I have access to a high end 3D printer and CAD software so I'm experimenting with some things too.
cris is offline   Reply With Quote
Old 12-09-2018, 05:16 AM   #16
MITCHELL
Sea Hunter
 
MITCHELL's Avatar
 
Join Date: Nov 2011
Location: Where ever I may roam where I lay my head I call home.
Posts: 2,225
Send a message via AIM to MITCHELL
I'll buy one off you......or trade a popper....or lure...

The one I have doesn't fit.
The holes have to be 2 inches on center.
Its going on a #6 aftco unibutt.
The reel seat is 1 1/2 inches wide
Attached Images
File Type: jpg 20181209_060059.jpg (49.6 KB, 93 views)
File Type: jpg 20181209_060936.jpg (56.4 KB, 92 views)
__________________
Duke Mitchell

Last edited by MITCHELL; 12-09-2018 at 09:44 AM.
MITCHELL is offline   Reply With Quote
Old 12-09-2018, 05:52 AM   #17
MITCHELL
Sea Hunter
 
MITCHELL's Avatar
 
Join Date: Nov 2011
Location: Where ever I may roam where I lay my head I call home.
Posts: 2,225
Send a message via AIM to MITCHELL
--------------->

------------>
Attached Images
File Type: jpg 20181209_064921.jpg (71.8 KB, 92 views)
__________________
Duke Mitchell
MITCHELL is offline   Reply With Quote
Old 12-09-2018, 02:06 PM   #18
Edwardduran117
Member
 
Join Date: Apr 2017
Location: Orange County, CA
Posts: 34
I dont think my clamps will fit that model of reel
Edwardduran117 is offline   Reply With Quote
Old 12-09-2018, 09:31 PM   #19
Edwardduran117
Member
 
Join Date: Apr 2017
Location: Orange County, CA
Posts: 34
Updated the post with new pictures and clamps! Thank you all again for the support!
Edwardduran117 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 02:33 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.