Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion
Home Forum Online Store Information LJ Webcam Gallery Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Display Modes
Old 03-11-2021, 10:58 AM   #1
JohnMckroidJr
Senior Member
 
JohnMckroidJr's Avatar
 
Join Date: May 2014
Location: Fort Lauderdale
Posts: 1,874
Quote:
Originally Posted by jruiz View Post
He says in the comments that the hull was cracked. I'm not sure how much self rescue and having a hand bilge would have helped him at this point.
Why not mention it in the video, or at least in the explanation of the video? A bad video does not merit the time to read his replies to other's comments. It has been my experience that cracks start out small and grow with time. I used a cracked outback for 3 months, and the crack grew maybe an inch during that time. What caused the crack? Where was the crack? So much lacking information, that otherwise might have made this video informative. In a bind, a piece of plastic bag can be jammed into a crack to arrest the leakage so the yak can be pumped out. If one carries flex tape, there is a good chance one can patch the crack, pump the water out of the kayak, and not have to burden rescue authorities. As long as the kayak is floating, there was a chance of self-rescue, especially with his buddy standing by. I guess neither had a means of bailing water -- Shame.
JohnMckroidJr is offline   Reply With Quote
Old 03-14-2021, 07:16 AM   #2
Orca Winfrey
Senior Member
 
Join Date: Sep 2015
Location: The I. E.
Posts: 353
Are they not wearing PFDs? Am I seeing right?
Orca Winfrey is offline   Reply With Quote
Old 03-15-2021, 04:36 PM   #3
FishinAll50
Junior
 
Join Date: Mar 2021
Posts: 4
Quote:
Originally Posted by JohnMckroidJr View Post
Why not mention it in the video, or at least in the explanation of the video? A bad video does not merit the time to read his replies to other's comments. It has been my experience that cracks start out small and grow with time. I used a cracked outback for 3 months, and the crack grew maybe an inch during that time. What caused the crack? Where was the crack? So much lacking information, that otherwise might have made this video informative. In a bind, a piece of plastic bag can be jammed into a crack to arrest the leakage so the yak can be pumped out. If one carries flex tape, there is a good chance one can patch the crack, pump the water out of the kayak, and not have to burden rescue authorities. As long as the kayak is floating, there was a chance of self-rescue, especially with his buddy standing by. I guess neither had a means of bailing water -- Shame.
Hey, I'm the guy that flipped! I completely agree after reading some comments like yours that I should have done a better job explaining the situation. I was in the water for over an hour, and after putting that video together I didn't wanna make it any longer. I'll do a video soon explaining mistakes for sure. I'm not sure what caused the crack, it was pretty spontaneous and was right at the dump of a water channel to a scupper. Which meant waves over the bow were entering the hull, instead of the scupper. A plastic bag or tape is a great idea! It'll be in the bag next time, I just wasn't prepared for a crack like that to happen. The kayak hull was filled and then capsized, with 0 chance of reentry. Thank you for the feedback!
FishinAll50 is offline   Reply With Quote
Old 03-15-2021, 10:30 PM   #4
JohnMckroidJr
Senior Member
 
JohnMckroidJr's Avatar
 
Join Date: May 2014
Location: Fort Lauderdale
Posts: 1,874
Quote:
Originally Posted by FishinAll50 View Post
Hey, I'm the guy that flipped! I completely agree after reading some comments like yours that I should have done a better job explaining the situation. I was in the water for over an hour, and after putting that video together I didn't wanna make it any longer. I'll do a video soon explaining mistakes for sure. I'm not sure what caused the crack, it was pretty spontaneous and was right at the dump of a water channel to a scupper. Which meant waves over the bow were entering the hull, instead of the scupper. A plastic bag or tape is a great idea! It'll be in the bag next time, I just wasn't prepared for a crack like that to happen. The kayak hull was filled and then capsized, with 0 chance of reentry. Thank you for the feedback!
Your welcome. Sorry for your loss. You can post your explanation video on this thread for clarity of what happened. When a kayak hull gets partially filled with water, it creates an unstable situation known as the free surface effect. Often, this can make it impossible to re-enter the kayak without causing it to capsize again. A solution would be to secure the leak and pump the water out while alongside the kayak in the water. Once the water is pumped out of the hull, the kayak will be stable enough to board.
JohnMckroidJr is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 10:44 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.