Share Your Innovations

[eDUBz]

I do autobody and paint and use these stand's to work on part's or paint with and use them for my OK Malibu two xl and work perfect it adjust with the chain's and fold's right and light weight just thought i'd share since it can be very useful.
http://www.tooltopia.com/astro-pneumatic-557003.aspx

[Jzo]

Originally Posted by eDUBz

I do autobody and paint and use these stand's to work on part's or paint with and use them for my OK Malibu two xl and work perfect it adjust with the chain's and fold's right and light weight just thought i'd share since it can be very useful.
http://www.tooltopia.com/astro-pneumatic-557003.aspx

Wow, nice!

[Stan K G]

For wet mounting using the black pipe section and rubber cap;

I had to install it in a fairly curved and asymetrical part of my yak, and I neither have the tools nor patience to file the pipe down properly, so I used marine putty.

Took the whole tube to make this...make sure to rough up the pipe very nicely, and to put on more than you need. Set it and put as much pressure as you can on it, let it cure. It will -NOT- hold to the yak plastic so after it cures pop it off and use marine poly glue to get it secure...use glue inside, outside and at the putty/pipe line so it holds and nothing leaks. (if you have it, silicone the threads to further reduce leak)







I also used some marine goop and a 2" section of PVC to mount my submerge type transducer under the rubber cap, forgot to take a pic.

[Stan K G]

Also

I use some teflon dry lubricant on the plastic threading on yak hatch covers, and the plastic hand pump....it made a HUGE difference in the pump. Smooth as silk now, takes no effort to empty out my in-yak livewell

[jorluivil]

I had this LED saved to install on my boat, boats gone so time to install it on the Ole Kayaki. Being that it was going to face me I decided to install it mostly downward, it's tuff to stare at after a minute or two. The labor hours have actually turned into days.......and still not done