Truck Rack - Kayak Fishing Adventures on Big Water’s Edge

Siebler · 07-01-2008, 02:58 PM

Truck Rack will fit most pickups. Fully Adjustable in length and width to 8' long and 7' wide. Rack has 2 utility lights mounted on the front (or rear if you put it on that way). Mounts with 8 bolts. Not included but they are cheap from the hardware store(I always recommend Grade 8 however it probably isn't necessary).

Will touch up paint and such for buyer.

125.00 OBO

Located at Anglers Yak Shack or can take home in the College area.

CJ@oeexpress.com

619-518-9174

bajadog · 07-02-2008, 04:22 AM

CJ,

Is it a tubular steel rack?

Marco

Siebler · 07-02-2008, 11:28 AM

Yes it is.

Siebler · 07-02-2008, 11:35 AM

Heres a picture, not the best to show the rack but you get the idea.

The Thule saddles that are on there can be had with the rack for 150.00 total.

Siebler · 07-02-2008, 11:36 AM

Also, You dont have to put on the bars that run Length wise. I used it without them for a long time.

Grego · 07-07-2008, 08:14 PM

CJ, you don't happen to have a close up pic of the mounting brackets? I have a similar truck but have a soft tonneau that mounts to the inside of the bed leaving the top of the bed rails free. But I need to see if it will interfere with my tonneau mounts.

Grego

Siebler · 07-08-2008, 09:53 AM

Here ya go Grego. On 95.5-2000 Tacoma's the mounts are almost the exact width of the bed rail, just maybe 1/8" less wide.

Grego · 07-08-2008, 01:29 PM

I see, so I will need to drill a couple holes into the top of the bed rail. I'm going to peek around at some 95.5-2000 models. My yak truck is a 92 (pre-tacoma). I'll only need to mount the rear set because I have a thule over the roof. Right now I have the other mount coming out of my bumper hitch.

Siebler · 07-08-2008, 01:47 PM

yep 2 holes per mount.

Grego · 07-15-2008, 08:26 AM

I'll be out of town this coming weekend, but I'm interested in coming by for a fit test. I'll coordinate through PM's.

Siebler · 07-31-2008, 02:55 PM

Still Available. Had a few guys that sounded really interested but flaked.

Ill let it all go for 120.00 (with saddles). Its at my house (college area) right now but I am working at OEX Point Loma and Mission Bay tomorrow.

Grego · 07-31-2008, 04:34 PM

Sorry CJ, been busy after coming back, please do sell it if I'm slacking. It's a $65 roundtrip for me so I have to coordinate my travel down there wisely. I might be fishing LJ itomorrow, and if it will be at your shop, I'll swing by to take a look but I'll have a different truck with me.

Siebler · 08-02-2008, 10:48 AM

sorry grego, that was in no way directed twords you. You never told me that you would come and get it, just that you were interested.

Unfortunately It is at my house today and Im at Point Loma.

07-01-2008, 02:58 PM	#1
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	Truck Rack Truck Rack will fit most pickups. Fully Adjustable in length and width to 8' long and 7' wide. Rack has 2 utility lights mounted on the front (or rear if you put it on that way). Mounts with 8 bolts. Not included but they are cheap from the hardware store(I always recommend Grade 8 however it probably isn't necessary). Will touch up paint and such for buyer. 125.00 OBO Located at Anglers Yak Shack or can take home in the College area. CJ@oeexpress.com 619-518-9174 __________________ CJ Siebler

07-02-2008, 04:22 AM	#2
bajadog I eats what I kills Join Date: Apr 2008 Location: San Diego Posts: 393	CJ, Is it a tubular steel rack? Marco __________________ Please release bill-fish.

07-02-2008, 11:28 AM	#3
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	Yes it is. __________________ CJ Siebler

07-02-2008, 11:35 AM	#4
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	Heres a picture, not the best to show the rack but you get the idea. The Thule saddles that are on there can be had with the rack for 150.00 total. __________________ CJ Siebler

07-02-2008, 11:36 AM	#5
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	Also, You dont have to put on the bars that run Length wise. I used it without them for a long time. __________________ CJ Siebler

07-07-2008, 08:14 PM	#6
Grego Senior Member Join Date: Mar 2005 Posts: 445	CJ, you don't happen to have a close up pic of the mounting brackets? I have a similar truck but have a soft tonneau that mounts to the inside of the bed leaving the top of the bed rails free. But I need to see if it will interfere with my tonneau mounts. Grego

07-08-2008, 09:53 AM	#7
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	Here ya go Grego. On 95.5-2000 Tacoma's the mounts are almost the exact width of the bed rail, just maybe 1/8" less wide. __________________ CJ Siebler

07-08-2008, 01:29 PM	#8
Grego Senior Member Join Date: Mar 2005 Posts: 445	I see, so I will need to drill a couple holes into the top of the bed rail. I'm going to peek around at some 95.5-2000 models. My yak truck is a 92 (pre-tacoma). I'll only need to mount the rear set because I have a thule over the roof. Right now I have the other mount coming out of my bumper hitch.

07-08-2008, 01:47 PM	#9
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	yep 2 holes per mount. __________________ CJ Siebler

07-15-2008, 08:26 AM	#10
Grego Senior Member Join Date: Mar 2005 Posts: 445	I'll be out of town this coming weekend, but I'm interested in coming by for a fit test. I'll coordinate through PM's.

07-31-2008, 02:55 PM	#11
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	Still Available. Had a few guys that sounded really interested but flaked. Ill let it all go for 120.00 (with saddles). Its at my house (college area) right now but I am working at OEX Point Loma and Mission Bay tomorrow. __________________ CJ Siebler

07-31-2008, 04:34 PM	#12
Grego Senior Member Join Date: Mar 2005 Posts: 445	Sorry CJ, been busy after coming back, please do sell it if I'm slacking. It's a $65 roundtrip for me so I have to coordinate my travel down there wisely. I might be fishing LJ itomorrow, and if it will be at your shop, I'll swing by to take a look but I'll have a different truck with me.

08-02-2008, 10:48 AM	#13
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	sorry grego, that was in no way directed twords you. You never told me that you would come and get it, just that you were interested. Unfortunately It is at my house today and Im at Point Loma. __________________ CJ Siebler