Share Your Innovations

[jorluivil]

This ain't a legit innovation without cable-ties. :p

Here ya go:aetsch:

https://lh5.googleusercontent.com/-CBQnDmTYoes/U3VuZQnfa8I/AAAAAAAALLM/7BzpfGnrfA8/w737-h553-no/DSCN5927.JPG

[chxh8me]

So.....here's my latest innovation/build. I put it together but Tony is the one that deserves most if not all of the credit.

https://lh4.googleusercontent.com/-Qp1k8KJSoDA/U3VrAS1KWvI/AAAAAAAALKo/_Gma0GT4MAI/w737-h553-no/DSCN5920.JPG



Nice. I was looking into doing the same exact thing recently, but took the lazy route and grabbed a portable washer off ebay for $100.

What did you power it with? SLA battery or car cigarette adapter? Can't tell from the pic, but it looks like its got the connector for a battery.
edit*** nevermind, just saw the pic you posted above.


Mine came with a car adapter only which is fine for now, but I want to rig up a female cigarette lighter adapter so I can run it off an extra SLA battery I have.

[jorluivil]

Nice. I was looking into doing the same exact thing recently, but took the lazy route and grabbed a portable washer off ebay for $100.

What did you power it with? SLA battery or car cigarette adapter? Can't tell from the pic, but it looks like its got the connector for a battery.
edit*** nevermind, just saw the pic you posted above.


Mine came with a car adapter only which is fine for now, but I want to rig up a female cigarette lighter adapter so I can run it off an extra SLA battery I have.

My primary source will be my LiFeP04 battery. I am in the process of rigging something that will help me run the wash down system off of my truck battery, it'll be something simple like a cord running to the lighter but I will only use this if I need to preserve the battery life on my LiFeP04 battery.

[cell128]

First innovation on my outback. Mini cutting board because I don't wanna cut holes on my yak lol http://img.tapatalk.com/d/14/05/17/py5avebu.jpg

Sent from my SCH-I545 using Tapatalk

[momo fish]

Nice idea. What did you use and how is it attached?

[cell128]

Nice idea. What did you use and how is it attached?

I bought the cutting board from 99 cent store and cut it to size with my skilsaw. Glued on with liquid nails i have left over from home depot. Its on solid.

Sent from my SCH-I545 using Tapatalk

[jorluivil]

I bought the cutting board from 99 cent store and cut it to size with my skilsaw. Glued on with liquid nails i have left over from home depot. Its on solid.

Sent from my SCH-I545 using Tapatalk

Liquid nails? You used construction adhesive on your kayak?

[cell128]

Liquid nails? You used construction adhesive on your kayak?

Oh oh is that bad? It's only on the hatch part. I can probably still take it off


Sent from my SCH-I545 using Tapatalk

[William Novotny]

Oh oh is that bad? It's only on the hatch part. I can probably still take it off


Sent from my SCH-I545 using Tapatalk

You gotta be carefully with chemical adhesives and poly plastics. Could cause a reaction

[wiredantz]

So.....here's my latest innovation/build. I put it together but Tony is the one that deserves most if not all of the credit.

https://lh4.googleusercontent.com/-Qp1k8KJSoDA/U3VrAS1KWvI/AAAAAAAALKo/_Gma0GT4MAI/w737-h553-no/DSCN5920.JPG

https://lh6.googleusercontent.com/-vYmDL-85qTk/U3V0TaCozgI/AAAAAAAALLs/T9bBPCHQOYc/w737-h553-no/DSCN5929.JPG


How much did that run you.?

[jruiz]

Oh oh is that bad? It's only on the hatch part. I can probably still take it off


Sent from my SCH-I545 using Tapatalk

If it sticks then it should be ok. PE and PP are one of the most inert and chemically stable materials out there. Just to paint a picture, they store very strong acides in PE bottles.

[cell128]

If it sticks then it should be ok. PE and PP are one of the most inert and chemically stable materials out there. Just to paint a picture, they store very strong acides in PE bottles.

Thanks. It held very well and I can cut up squid a lot easier than. On the wet cardboard it comes in.

Sent from my SCH-I545 using Tapatalk

[alanw]

If it sticks then it should be ok. PE and PP are one of the most inert and chemically stable materials out there. Just to paint a picture, they store very strong acides in PE bottles.

Random useless information: Some surgical mesh like that used for hernia repair is made from PP partly because it is inert and stable in the body. I may or may not be part human, part kayak.

[jorluivil]

https://lh4.googleusercontent.com/-Qp1k8KJSoDA/U3VrAS1KWvI/AAAAAAAALKo/_Gma0GT4MAI/w737-h553-no/DSCN5920.JPG

lets see if I remember.....

$140 for the pump (westmarine 4.0 GPM washdown pump)
$75 for tank (tank-depot 7 gallon flat bottom tank)
$50 additional parts (polyethylene glue, elbows, etc)

I know I know, its a bit pricey. Some guys are probably saying, 'no effen way I'm paying $300 for a wash down system when I could buy one for $30'. To those that may say that I say......................enjoy your insecticide sprayer.

[cell128]

Random useless information: Some surgical mesh like that used for hernia repair is made from PP partly because it is inert and stable in the body. I may or may not be part human, part kayak.

Regardless of this my kayak hasn't exploded yet but if it doss I hope its in my garage lol. next time I glue anything it will be marine goop. That's what I wanted to use but just didn't have it at the time.

Sent from my SCH-I545 using Tapatalk

[mrJB]

Getting tired of snagging sabiki, treble, and most other hooks on the side pockets. First prototype (out of cutting board plastic).

We'll see...

12475

[William Novotny]

https://lh4.googleusercontent.com/-Qp1k8KJSoDA/U3VrAS1KWvI/AAAAAAAALKo/_Gma0GT4MAI/w737-h553-no/DSCN5920.JPG

lets see if I remember.....

$140 for the pump (westmarine 4.0 GPM washdown pump)
$75 for tank (tank-depot 7 gallon flat bottom tank)
$50 additional parts (polyethylene glue, elbows, etc)

I know I know, its a bit pricey. Some guys are probably saying, 'no effen way I'm paying $300 for a wash down system when I could buy one for $30'. To those that may say that I say......................enjoy your insecticide sprayer.

Go detail a few cars with that thing and it'll pay for itself

[octico]

Getting tired of snagging sabiki, treble, and most other hooks on the side pockets. First prototype (out of cutting board plastic).

We'll see...

12475

That is really cool! I keep having the same problem 99cent store here I come.

[Zfish03]

I'm tired of sucking up eel grass, whale semen, and whatever else is floating around in LJ...So I found a solution on here.
I know this has been done before, but I remember the previous post had the mesh screen inside the end of bottom black piece. I thought this method was much more easy to do instead trying to form and shove the mesh inside the black piece. Works great!
http://i1133.photobucket.com/albums/m587/zacolsen2003/IMG_1160_zps5982c60b.jpg (http://s1133.photobucket.com/user/zacolsen2003/media/IMG_1160_zps5982c60b.jpg.html)
http://i1133.photobucket.com/albums/m587/zacolsen2003/IMG_1161_zps80f95976.jpg (http://s1133.photobucket.com/user/zacolsen2003/media/IMG_1161_zps80f95976.jpg.html)

[DanaPT]

http://www.midlandhardware.com/thumbnail.asp?file=assets/images/products/713443.jpg&maxx=200&maxy=0

OR nylon lint trap 2 pack. $1.79

Works excellent.

[tsugg]

I really don't want to lose any of my rods and reels,I have had some of the shimanos for over 30 years. So I came up with a easy seat belt to keep them safe in the event of a roll over in my PA14.This is a simple build and the attachment hooks on the bottom of the PA are already there(I never use them). If I remember right, I spent $13.00 on the materials from OEX.

[tsugg]

I'll be the first to admit that I need to lose weight. BUT in the mean time I have to fish! So as I was shopping around for my first kayak I found some really neat things on some kayaks. Each different mfgr. has it's own cool factor.The one that really struck me as a required tool is the assist leash in the jackson kayaks. If you haven't seen it, it's attached in front of where you sit and if you want to get something from the front hatch or stand up and stretch your legs, you just grab it and you can use your arms to help you stand or get from sitting to your knees very easily. So I rigged a super cheap easy one for my PA14. I used a 1/2" inch sch. 40 pvc nipple( I think it was just long enough to rise out of the sail socket by 2")then put a cap on it and I heated it with a torch just enough to soften it and put a slight bend in it(maybe one or two degrees)so when you drop it in the sail socket it has a bit of resistance(because it's crooked and the socket is straight).Then I spliced some 1/2" poly rope to make the leash. Very easy and when you don't need it in there you just pull it out and throw it on the work bench, no harm to the PA.

[jorluivil]

I really don't want to lose any of my rods and reels,I have had some of the shimanos for over 30 years. So I came up with a easy seat belt to keep them safe in the event of a roll over in my PA14.This is a simple build and the attachment hooks on the bottom of the PA are already there(I never use them). If I remember right, I spent $13.00 on the materials from OEX.

Doesn't your PA already have the rod bungee tie downs factory installed?

[jorluivil]

I'm tired of sucking up eel grass, whale semen, and whatever else is floating around in LJ...So I found a solution on here.
I know this has been done before, but I remember the previous post had the mesh screen inside the end of bottom black piece. I thought this method was much more easy to do instead trying to form and shove the mesh inside the black piece. Works great!
http://i1133.photobucket.com/albums/m587/zacolsen2003/IMG_1160_zps5982c60b.jpg (http://s1133.photobucket.com/user/zacolsen2003/media/IMG_1160_zps5982c60b.jpg.html)
http://i1133.photobucket.com/albums/m587/zacolsen2003/IMG_1161_zps80f95976.jpg (http://s1133.photobucket.com/user/zacolsen2003/media/IMG_1161_zps80f95976.jpg.html)

Its a great design but it sucks..................speaking from experience of course.

I did something very similar and had such bad results that I decided to leave it as it was built. The problem with this idea is that now every little piece of trash, weed, grass, etc. that could have simply run through the tube past the impeller and into the tank will be help up at the screen. One piece will turn into two, two into three and so on and so forth and before you know....BLOCKAGE:mad:

Again, its a great design/idea but the reality is that it will only work until small particles start to jam up against the screen. I'm speaking from experience and nothing else. I've got a few things that I'm working on to help prevent weeds and crap from being sucked into the pump...........I'll peep you posted.

[Zfish03]

Its a great design but it sucks..................speaking from experience of course.

I did something very similar and had such bad results that I decided to leave it as it was built. The problem with this idea is that now every little piece of trash, weed, grass, etc. that could have simply run through the tube past the impeller and into the tank will be help up at the screen. One piece will turn into two, two into three and so on and so forth and before you know....BLOCKAGE:mad:

Again, its a great design/idea but the reality is that it will only work until small particles start to jam up against the screen. I'm speaking from experience and nothing else. I've got a few things that I'm working on to help prevent weeds and crap from being sucked into the pump...........I'll peep you posted.

Good call, I was kinda worried about that. I've been lucky so far. I took it to the bay through a bunch of eel grass. My pump was fine but my buddy's pump got clogged. Only used it once in LJ, no issue yet. I was thinking about making a some larger holes in the mesh and hopefully smaller stuff can get through. Thanks for the response, I'll keep testing idea's as well

[Rambo]

Found this baby cup holder to be very useful for any kayaker or proangler owner. The clamps open about 3inch max and has a powerful rubberize clamping. Not to mention it's plastic so no rust to worry about. It comes with 2 cup holder and a twist know to tighten the clamp to a bar handle or any part of the kayak that is less than 3inch. For $7 it's cheap and can be your great add on to any kayak that need drink holder.

Here's an example.

[yak-fishing-socal]

Found this baby cup holder to be very useful for any kayaker or proangler owner. The clamps open about 3inch max and has a powerful rubberize clamping. Not to mention it's plastic so no rust to worry about. It comes with 2 cup holder and a twist know to tighten the clamp to a bar handle or any part of the kayak that is less than 3inch. For $7 it's cheap and can be your great add on to any kayak that need drink holder.

Nice I'll have to see if this will work on my Mk x factor thanks for the idea


Sent from my SAMSUNG-SGH-I537 using Tapatalk

[467echo]

Good call, I was kinda worried about that. I've been lucky so far. I took it to the bay through a bunch of eel grass. My pump was fine but my buddy's pump got clogged. Only used it once in LJ, no issue yet. I was thinking about making a some larger holes in the mesh and hopefully smaller stuff can get through. Thanks for the response, I'll keep testing idea's as well

I have just used simple screen door mesh. I replace it every time I head out. Its cheap and takes 1 minute to do. I found that if I left it on and there was some gunk on it from a previous trip it would clog easier.

[Rambo]

Here's a DIY for anyone that wants scupper adjustable plug in cart with the ability to exchange any wheels to haul their kayak on the beach or terrains.

Equipment needed (home depot)
QTY: Material Price
1 3/4 in. x 10 ft. Electric Metallic Tube Conduit 3.64
1 5/8x11 by 24 inch length threaded rod stainless steel 4.54
1 5/8x11 by 36 inch lenght threaded rod stainless steel 6.98
8 5/8x11 nut 8 x 0.35 = 2.80
8 3/4 washer 8 x 0.40 = 3.20
2 10-1/2 in. x 3-1/3 in. Flat-Free Tire for Hand Trucks (300lbs payload per wheel) 2 x 24.99

Total Price = 71.16 before tax

Finish product
http://i142.photobucket.com/albums/r109/OneL1fe/20140709_190230_zps2ca1a11a.jpg

Cut the pipes into 36"
Then use pipe bender to bend to 45 degrees, I mark about 8.25inch from the bottom of my 36" pipe to start my first bend. then 16.30" for the 2nd bend. This allows for my 11 1/2" gap for the scupper plug with my 36" 5/8" threaded rod.

http://i142.photobucket.com/albums/r109/OneL1fe/20140624_191712_zpsdba37ca1.jpg

Use a center punch to start my drill place, and after that, start with my small drill bit and step step to drill my to my 5/8 hole diameter.

http://i142.photobucket.com/albums/r109/OneL1fe/20140624_203943_zpsec792c3b.jpg


http://i142.photobucket.com/albums/r109/OneL1fe/20140624_203959_zps9d86f3fe.jpg

Then I test the assembly after drilling all my holes for the wheel axle and the supporting/resting bar.
http://i142.photobucket.com/albums/r109/OneL1fe/20140624_205220_zpsa092fcee.jpg

http://i142.photobucket.com/albums/r109/OneL1fe/20140624_205225_zps45787f78.jpg

With the left over 40" pipe I trim it down t 24" and added it as a sleeve to help distribute the load over the axle in case it bows.

http://i142.photobucket.com/albums/r109/OneL1fe/20140624_211845_zps1bb355c0.jpg

Also, in case I need to change out the wheels for beach wheels, its easy to just unscrew and place the beach wheels due to my long thread.

http://i142.photobucket.com/albums/r109/OneL1fe/20140624_211839_zps97d736dd.jpg

It's my 1st attempt at pipe bending. I'll be adding some PVC/pool noodle to top supporting rod to minimize any scruff mark on the kayak.

[jruiz]

Just some helpful criticism. The Wheel on the left will always work loose since it's spinning ccw. The pinched bends probably reduced your weight capacity quite a bit.

[pbb]

Good call, I was kinda worried about that. I've been lucky so far. I took it to the bay through a bunch of eel grass. My pump was fine but my buddy's pump got clogged. Only used it once in LJ, no issue yet. I was thinking about making a some larger holes in the mesh and hopefully smaller stuff can get through. Thanks for the response, I'll keep testing idea's as well

Seems like blocked intake is easier to resolve than clogged pump.

Sent from my ADR6350 using Tapatalk 2

[jorluivil]

Seems like blocked intake is easier to resolve than clogged pump.

Sent from my ADR6350 using Tapatalk 2

If small debris is jammed up against the mesh how are you going to get it out?

[pbb]

If small debris is jammed up against the mesh how are you going to get it out?

Well, I could try removing the intake assembly from the livewell and blowing back through it, and shake it underwater. Worst case I would need to take the end off.

Hell, the whole intake assemblies cost less than $8. You could carry two if it was giving you a lot of trouble.

Although I agree that if you are going to put mesh over the intake, then the approach of putting it at the very front/outside, rather than an inch inside would probably be less likely to get blocked and easier to clean, although more work to install.

One could probably use something like the stainless steel drain strainer at the bottom of the scupper, rather than in the intake.

Maybe this is not really necessary. Are you suggesting that if the intake gets blocked it will burn out the pump? Otherwise, it does seem better to be safe than sorry.

[dsafety]

Well, I could try removing the intake assembly from the livewell and blowing back through it, and shake it underwater. Worst case I would need to take the end off.

Hell, the whole intake assemblies cost less than $8. You could carry two if it was giving you a lot of trouble.

Although I agree that if you are going to put mesh over the intake, then the approach of putting it at the very front/outside, rather than an inch inside would probably be less likely to get blocked and easier to clean, although more work to install.

One could probably use something like the stainless steel drain strainer at the bottom of the scupper, rather than in the intake.

Maybe this is not really necessary. Are you suggesting that if the intake gets blocked it will burn out the pump? Otherwise, it does seem better to be safe than sorry.


My approach is much simpler. Yes the screens get plugged up and there is not much you can do to prevent this. Rather than try to prevent this problem, I have discovered an easy and quick way to unplug a blockage.

I keep a little piece of plastic pipe in my tank that easily fits into the intake hose inside my tank, (see photo).
P1020503.jpg (http://www.bigwatersedge.com/bwevb/attachment.php?attachmentid=12791&stc=1&d=1404495878)
Whenever something gets plugged up, I simply insert the pipe in the hose and blow some air through the system. If you need to quickly prime the pump, just suck a little water back and you are good to go.

Bob

[DanaPT]

Seems like blocked intake is easier to resolve than clogged pump.

Sent from my ADR6350 using Tapatalk 2


The nylon lint traps are the way to go. about $2 for two and a zip tie. no fuss, no worries, and more importantly no clogs.

Another adjustment for the bait tank is an extension to the out-flow. This allows the tank to fill an additional 1-2 inches. I stow it in the bait tank. When I need more water in the tank I slide it on.

[RockyRaab]

After fishing, I generally pull down to the end of the ramp rather than risk a heart attack pulling my loaded PA14 back to the lot. The PA slides easily onto my roof rack -- TOO easily. On a steeper than usual ramp once, it almost slid all the way off, onto my hood and then nosefirst onto the ramp. I also needed a way to protect the paint on my Highlander's spoiler. Here are my two solutions:

To protect the spoiler and help keep the PA from sliding off sideways, I glued ans screwed two short pieces of scrap 2x2 to an old cutting board (plywood woul work as well) and then bent two strips of steel strapping into squared-off hooks to slip around the rear crossbar. Here's that innovation: (Excuse the pre-dawn lighting)

http://i27.photobucket.com/albums/c170/RockyRaab/Kayak/IMG_0882_zpsdcb64448.jpg

Then, to keep the kayak from moving forward - or sideways in crosswinds - I cut another piece of wood into a tapered shape to loosely match the mirage drive well and bolted it to the front crossbar.

http://i27.photobucket.com/albums/c170/RockyRaab/Kayak/IMG_0885_zps84f6622e.jpg

Now, I can rest the nose of the PA between the two cutting board guide rails, lift the stern and simply slide the 'yak forward until the drive hole drops onto the front safety block.

I then remove the cutting board, tie the 'yak down with straps and two front ropes.

http://i27.photobucket.com/albums/c170/RockyRaab/Kayak/IMG_0821_zpsaa23c18e.jpg

Voila! That PA isn't going anywhere!

[DanaPT]

a picture's worth 1000 words.

[Matar]

http://img.tapatalk.com/d/14/07/12/suqupa9a.jpg
Built a card to carry the yak and store my gear and others items. The nice thing is that it rolls around and move out of the way when I need it to and then when I lift the yak into rafters the foot print is not that big and I have another work table.


Sent from my iPhone using Tapatalk

[CheapPelican]

To protect the spoiler and help keep the PA from sliding off sideways, I glued ans screwed two short pieces of scrap 2x2 to an old cutting board (plywood woul work as well) and then bent two strips of steel strapping into squared-off hooks to slip around the rear crossbar. Here's that innovation: (Excuse the pre-dawn lighting)

http://i27.photobucket.com/albums/c170/RockyRaab/Kayak/IMG_0882_zpsdcb64448.jpg


Does the cutting board lay flat against the roof and spoiler distrubituing the weight, or is there a block under the front of the board to keep the weight off of the spoiler?

[PapaDave]

Its a great design but it sucks..................speaking from experience of course.

I did something very similar and had such bad results that I decided to leave it as it was built. The problem with this idea is that now every little piece of trash, weed, grass, etc. that could have simply run through the tube past the impeller and into the tank will be help up at the screen. One piece will turn into two, two into three and so on and so forth and before you know....BLOCKAGE:mad:

Again, its a great design/idea but the reality is that it will only work until small particles start to jam up against the screen. I'm speaking from experience and nothing else. I've got a few things that I'm working on to help prevent weeds and crap from being sucked into the pump...........I'll peep you posted.

I too tried that route using many configurations, screen at the top, bottom, inside and out. Each one had similar results, I am back to an open tube.

[RockyRaab]

The cutting board simply lays flat, CP. The spoiler is stronger than I feared, apparently, because it doesn't sag a bit when I lower the 'yak onto it.

[salty pirate]

Thought I would share this fix for the hobie livewell. I have about 2 years on this fix with no problems other than the screen getting clogged once and a while.

The check valve disperses the flow witch helps keep the bait from getting jammed in the corner. Also keeps water + scales from flowing back and getting jammed in the impeller when it gets shut off.

The screen keeps the crud out.

[yak-fishing-socal]

Cheap and easy kelp line/ tail line http://img.tapatalk.com/d/14/08/05/7a9esy9y.jpg

http://img.tapatalk.com/d/14/08/05/yrutu3us.jpg

I simply hook the carabiner to my anchor trolley and put the loop around kelp and tighten also can be used for a tail line on bigger fish or sharks....this taut line knot is the key because you can put heavy load on the knot and still simply move it... Video blow shows the knot

Watch "How to Tie a Taut Line Knot" on YouTube
How to Tie a Taut Line Knot: http://youtu.be/Rv2GhpeXav8

[boxturtle]

not my original idea but didn't see anybody post it yet. They work great especially for the bigger reels

[Revell]

Hobie wants $60 for their Outback hatch liner.
I purchased a ROUND tub at Walmart for $3.92.
Cut it down and it works perfectly.

[Lipripper92592]

That is a good looking job right there!, nice and clean.

[Fishin Phil]

Here are some Pro Angler kayak racks I made to make loading and unloading easy.

http://youtu.be/qu5V39LohA4

[RockyRaab]

Intentional humor there?

[yak-fishing-socal]

OK so I have had a few people pm me on here from my other post about my t15 looks like people want to know what kind of wheels I'm using for my kayak yes they are purple but I don't care if I come across black ones I'll swap them out...

I had the idea to use power wheels "wheels" after seeing the price of other sand tires.. I knew I needed something with a big footprint so when I was cleaning the backyard I notice my daughters power wheel was just sitting there getting ruined we lost the charger and it was pretty much junk so I asked her if I could have them, she said yes..and that's all there is to it..I'm not going to go into details on how to make a cart there are plenty of YouTube videos for that I just use big PVC pipe power wheel wheels and a pool noodle. I will upload better pictures when I get back into town..
http://tapatalk.imageshack.com/v2/14/11/08/650ec10488c05e9e336ac729e63c8044.jpg
http://tapatalk.imageshack.com/v2/14/11/08/a17517af1645eeb18f48eb125d5aa871.jpg

And yes they work great on the sand as long as your kayak isn't too heavy or overloaded.. I don't even need to strap it to they kayak just put the cart by the cockpit and y'all should be good
This guy sells em for 15 for two
http://losangeles.craigslist.org/lgb/tag/4735393213.html

OK I was able to locate so bigger and wider big wheel tires my other ones worked good these should be great

http://tapatalk.imageshack.com/v2/14/11/12/534871bc8ab036bfd37235eb000177c7.jpg
http://tapatalk.imageshack.com/v2/14/11/12/e947fd134984ab5d34b11c3414d4f9f3.jpg

[WildernessWanker]

If you don't have wheels you can pick them up pretty cheap on eBay, I think I paid less than $15 for a set including shipping.

[yak-fishing-socal]

Oh nice I just look on cl for people throwing them out

[kayachapi]

Old broken shovel handle. 138661386713868138691387013871. I made this for a thank you to some friends that took my boys and I fishing on their boat.

[jorluivil]

Old broken shovel handle. . I made this for a thank you to some friends that took my boys and I fishing on their boat.

Thats bad ass!!!

[kayachapi]

Thank you. It came out better than expected

[Cbad Mike]

kayachapi,
Very nice work!!!

[Dannowar]

Broken pool cue. Not as nice as the shovel handle but already laminated and heavy/hard.


http://img.photobucket.com/albums/v13/littlehammet/326AF498-B5DB-4C4D-81A9-1F9C5A57DA60_zps6ssbmro9.jpg (http://smg.photobucket.com/user/littlehammet/media/326AF498-B5DB-4C4D-81A9-1F9C5A57DA60_zps6ssbmro9.jpg.html)

[kayachapi]

I've been staring at that shovel handle forever.

[Parrotfish-Paul]

Grabbing extra poles are easy from the stock rear holders, But being a short person I had problems reaching my extra poles, net or gaff from the stock front pole holders. The 2012 has threaded inserts behind the seat so with a piece of aluminum square stock screwed into them and four scotty mounts I fixed that problem. Now i can reach all my gear from behind me. this is what the finished product looks like.

Having four additional mounts without drilling any holes in the kayak makes it easy to change the layout when needed. This also makes it easy to remove if I were to sell it to someone that didn't want the extra mounts behind them. Also with the built in bait well I don't need to reach behind me for a bait bucket.

[619-SWIM-DOG]

Had to redo PVC Rod holder on the yak. It works great and gives you back support.

[Deamon]

Painted black! Much better than pvc white!!! Good job Nick! Jim

[wiredantz]

i was lossing about 2mph when hitting max speed on my torqeedo. So i gave it some thought and went down every row at Home depot. I came across the plastic conduit boxes in the electrical row and I said to myself this just might work!

You would think with a 1600 motor they would have all these problems solved....

Fix cost me $18.00

One Torqeedo Lower clamp ring 069-0011 $7.00
Plastic Conduit Box $11.00
one camp ring $.45



it did, i hit 5.4 mph on the torqeedo at max speed without it picking up air.


http://i172.photobucket.com/albums/w21/darkmatrix84/cavitationproblem_zpsbcd757e5.jpg

http://i172.photobucket.com/albums/w21/darkmatrix84/cavitationproblem3_zpsaae08b30.png

http://i172.photobucket.com/albums/w21/darkmatrix84/cavitation3_zpsb88b4b8d.jpg

[jorluivil]

i was lossing about 2mph when hitting max speed on my torqeedo. So i gave it some thought and went down every row at Home depot. I came across the plastic conduit boxes in the electrical row and I said to myself this just might work!

You would think with a 1600 motor they would have all these problems solved....

Fix cost me $18.00

One Torqeedo Lower clamp ring 069-0011 $7.00
Plastic Conduit Box $11.00
one camp ring $.45



it did, i hit 5.4 mph on the torqeedo at max speed without it picking up air.


http://i172.photobucket.com/albums/w21/darkmatrix84/cavitationproblem_zpsbcd757e5.jpg

http://i172.photobucket.com/albums/w21/darkmatrix84/cavitationproblem3_zpsaae08b30.png

http://i172.photobucket.com/albums/w21/darkmatrix84/cavitation3_zpsb88b4b8d.jpg


Its a great idea, it looks like it will work similar to a trim tab. However:D........

How are you keeping it from going sideways? If one of the sides gets kelp or grass or whatever caught in on it the drag of whatever is hung up on it will cause the tab to turn sideways. If the tab is sideways my guess is that the motion of the kayak going up & down will cause drag on whatever side the tab is on and will in turn cause the kayak to go down or up in a sideways motion. I'm thinking that you'll have the same results when you're turning in rough seas.

With the above being said another thing that can happen is that the up & down motion of the kayak will result in unwanted pressure being placed on the plate and may cause it to snap, best thing that can happen is that the plate will snap and your pole will remain straight.

Anyway......that's my thought.

good luck;)

[wiredantz]

Its a great idea, it looks like it will work similar to a trim tab. However:D........

How are you keeping it from going sideways? If one of the sides gets kelp or grass or whatever caught in on it the drag of whatever is hung up on it will cause the tab to turn sideways. If the tab is sideways my guess is that the motion of the kayak going up & down will cause drag on whatever side the tab is on and will in turn cause the kayak to go down or up in a sideways motion. I'm thinking that you'll have the same results when you're turning in rough seas.

With the above being said another thing that can happen is that the up & down motion of the kayak will result in unwanted pressure being placed on the plate and may cause it to snap, best thing that can happen is that the plate will snap and your pole will remain straight.

Anyway......that's my thought.

good luck;)

Good points, I drilled the circle to be snug with the pole, so it can still turn with pressure.... Kelp would be a problem... the plastic plate its pretty durable the same thickness as our kayaks, so i don't think it will snap off (but who knows)but I will just have to pull up the motor, as I always do when I go across kelp...


the 6 hours I spent in the ocean the other day didn't budge it, so I guess its still good. If it does move ill just readjust with my paddle.

[jruiz]

Good points, I drilled the circle to be snug with the pole, so it can still turn with pressure.... Kelp would be a problem... the plastic plate its pretty durable the same thickness as our kayaks, so i don't think it will snap off (but who knows)but I will just have to pull up the motor, as I always do when I go across kelp...


the 6 hours I spent in the ocean the other day didn't budge it, so I guess its still good. If it does move ill just readjust with my paddle.

http://i1232.photobucket.com/albums/ff373/shucksjay/DSCN0052.jpg (http://s1232.photobucket.com/user/shucksjay/media/DSCN0052.jpg.html)

[makobob]

Good points, I drilled the circle to be snug with the pole, so it can still turn with pressure.... Kelp would be a problem... the plastic plate its pretty durable the same thickness as our kayaks, so i don't think it will snap off (but who knows)but I will just have to pull up the motor, as I always do when I go across kelp...


the 6 hours I spent in the ocean the other day didn't budge it, so I guess its still good. If it does move ill just readjust with my paddle.

That's a real fine canoe you are building! Damn fine.

[StinkyMatt]

Can we now call this thing a "Bayliner"?


Nice boat Frank.......do you still fish?

[jruiz]

Can we now call this thing a "Bayliner"?


Nice boat Frank.......do you still fish?

Frank will start taking deposits for mothership trips from his kayak after the first of the year. Don't miss out!!!!!

[HELLSTER INC.]

Hobie does not make rail mounts for scotty products for the 2015 PA. With all the scotty's i have i don't want to replace them all. So i bought some extra Ram ball rail mounts from Andy "ICEMAN" and it was really easy to adapt. 14315 Remove ram ball from clamp and replace with scotty mount, use the same screw but have to add a 1/4" spacer at the bottom then use the same nut that was on the ram ball. Not really a innovation but it solved my problem!http://i955.photobucket.com/albums/ae35/HELLSTERINC/10407390_10203371976081128_3442067637790401922_n.j pg

[bus kid]

Hobie does not make rail mounts for scotty products for the 2015 PA. With all the scotty's i have i don't want to replace them all. So i bought some extra Ram ball rail mounts from Andy "ICEMAN" and it was really easy to adapt. 14315 Remove ram ball from clamp and replace with scotty mount, use the same screw but have to add a 1/4" spacer at the bottom then use the same nut that was on the ram ball. Not really a innovation but it solved my problem!http://i955.photobucket.com/albums/ae35/HELLSTERINC/10407390_10203371976081128_3442067637790401922_n.j pg

you should patent that. :D

[cell128]

Tired of my dog eating my shoes when I try to dry them out. this should work. Cut off barbs for safety http://tapatalk.imageshack.com/v2/15/02/01/559218c0fee009e49edcb74e699f2909.jpg

[Silbaugh4liberty]

Was bored today since I didn't go fishing, so I upgraded my cheap $10 gaff and $10 bat with some paracord since I still have about 900 ft left. After I wrapped it, I soaked it and let it dry since paracord shrinks after getting wet. Feels real solid and didn't use any adhesive. Hopefully it holds.

14786

[momo fish]

Now that's solid work! Looks better than most I have seen at stores..

Do you ship? 😉

[Silbaugh4liberty]

Now that's solid work! Looks better than most I have seen at stores..

Do you ship? 😉
I'll make one for you Mo. $20 each. ;)

[kayachapi]

Made a rod holder to lay my pole down without it flopping around.

[kayachapi]

Was bored today since I didn't go fishing, so I upgraded my cheap $10 gaff and $10 bat with some paracord since I still have about 900 ft left. After I wrapped it, I soaked it and let it dry since paracord shrinks after getting wet. Feels real solid and didn't use any adhesive. Hopefully it holds.

14786

When I was doing a paracord project, I read to soak it in boiling water for five minutes to shrink it. I did. It was a gift so I haven't heard if it's still holding. But if your gets loose you could try that. Nice Job!

[Silbaugh4liberty]

When I was doing a paracord project, I read to soak it in boiling water for five minutes to shrink it. I did. It was a gift so I haven't heard if it's still holding. But if your gets loose you could try that
Good tip. I'll keep that in mind. My experience with paracord, just getting it wet in general seems to shrink. If it doesn't hold, I'll do the boiling water next.

[kayachapi]

This is the one I wanted to get show.

[kayachapi]

Good tip. I'll keep that in mind. My experience with paracord, just getting it wet in general seems to shrink. If it doesn't hold, I'll do the boiling water next.

Nice work!

[Silbaugh4liberty]

This is the one I wanted to get show.
That's a good one, especially for rough launches and landings! I dig it!

[Fishwhisperer619]

http://tapatalk.imageshack.com/v2/15/03/06/a2f29ed5952ea0e880deffb309e42dc6.jpg
Nothing crazy but i made this achor line with what i was able to find around the house (with the exception of the red/white floats).
http://tapatalk.imageshack.com/v2/15/03/06/8ae1be2c3633a0b54c38e39a3a341ebd.jpg
Tuck the paracord under the zip-tie clip and pass it throught the figure 9 carabiner and itll hold up. Plus if i hook into a big boy i can unclip quickly, handle business, and then go back to my floating line

[svendawg]

http://tapatalk.imageshack.com/v2/15/03/06/a2f29ed5952ea0e880deffb309e42dc6.jpg
Nothing crazy but i made this achor line with what i was able to find around the house (with the exception of the red/white floats).
http://tapatalk.imageshack.com/v2/15/03/06/8ae1be2c3633a0b54c38e39a3a341ebd.jpg
Tuck the paracord under the zip-tie clip and pass it throught the figure 9 carabiner and itll hold up. Plus if i hook into a big boy i can unclip quickly,




handle business, and then go back to my floating line


You should tie your rope to the other end of the anchor and then run it through a zip tie attached to the other end of the anchor. That way if the anchor get hung up the zip tie will break and the anchor will pull out from the front.

[Fishwhisperer619]

You should tie your rope to the other end of the anchor and then run it through a zip tie attached to the other end of the anchor. That way if the anchor get hung up the zip tie will break and the anchor will pull out from the front.
Ive seen people do that and its a good idea in theory, but what happens if the rope is on the underside of the anchor when it hits bottom? Its purpose is defeated. ive never been hung up so bad that i cant get my anchor out so i dont feel the need for it.

[svendawg]

Ive seen people do that and its a good idea in theory, but what happens if the rope is on the underside of the anchor when it hits bottom? Its purpose is defeated. ive never been hung up so bad that i cant get my anchor out so i dont feel the need for it.

I've been hung up twice to where I had to break the zip tie to get free. It's not perfect but I think it increases your odds of recovering your anchor

[Fishwhisperer619]

I've been hung up twice to where I had to break the zip tie to get free. It's not perfect but I think it increases your odds of recovering your anchor
Better safe than sorry

[Caseym]

14876
Padding and beer holder to follow.:party:

[kayachapi]

14876
Padding and beer holder to follow.:party:

Nice!

[Yakkid]

did something like that for my kayak but used an adaptor to go up to an 1 1/2"

[ccacher1]

I know another member recently used plastic toy car wheels to make a dolly but figured I'd share my design as well... Found a kids atv in a trash pile and snagged the wheels to make my dolly. Total cost...about $25 in PVC tube and couplers. Hopefully these big plastic wheels roll over the sand better than my previous narrow wheels.

http://i1147.photobucket.com/albums/o546/craigcacheris/Mobile%20Uploads/image_zps0lzmh5dz.jpg (http://s1147.photobucket.com/user/craigcacheris/media/Mobile%20Uploads/image_zps0lzmh5dz.jpg.html)


http://i1147.photobucket.com/albums/o546/craigcacheris/Mobile%20Uploads/image_zps8b6fcpyt.jpg (http://s1147.photobucket.com/user/craigcacheris/media/Mobile%20Uploads/image_zps8b6fcpyt.jpg.html)

[yak-fishing-socal]

👍👍 nice

[Fishy Business]

some great ideas, thank you... :reeling:

[yak-fishing-socal]

DIY Magnetic transducer mount
It's not pretty but it should be functional hopefully i will be able to get out within the next few days to test it...


http://images.tapatalk-cdn.com/15/04/29/51480cc88082911ec937495d20df4515.jpghttp://images.tapatalk-cdn.com/15/04/29/92696bda9c970c0e16671d60663340b3.jpghttp://images.tapatalk-cdn.com/15/04/29/d3c85a17678944ed025767a0cabb3107.jpghttp://images.tapatalk-cdn.com/15/04/29/bbeccf1ab9130c380401fa8950f73200.jpg

Also made a lure out of the same stuff(instamorph) with wights in it

[ful-rac]

Not only is it not pretty..... I can't even see it...?

[yak-fishing-socal]

What? You can't see the pictures? I just went on the website and they are up

[ful-rac]

It's ok now.;)

[PapaDave]

I have a 2011 PA14 and have always been frustrated by the way the seat is mounted on the kayak. the bait loves to hide in it, as does short lobster and tackle. And just reaching under it would scrap the heck out of my hands.

So about a year ago I designed and had some prototypes built of an improved seat mount. And after a year of testing I have made some adjustments to the design and am considering making another run. The images are the prototype, there are some slight differences from the latest model.

Anyone interested in one? The advantages are it's lighter, a little higher and you can store stuff underneath.

[igotpron]

I have a 2011 PA14 and have always been frustrated by the way the seat is mounted on the kayak. the bait loves to hide in it, as does short lobster and tackle. And just reaching under it would scrap the heck out of my hands.

So about a year ago I designed and had some prototypes built of an improved seat mount. And after a year of testing I have made some adjustments to the design and am considering making another run. The images are the prototype, there are some slight differences from the latest model.

Anyone interested in one? The advantages are it's lighter, a little higher and you can store stuff underneath.

You got my interest. I might like one. How much higher are we talking? At least 1/1/2"-2"? And how much$?

[PapaDave]

The more units are ordered the less the price. Ten would run about $35-40, twenty would be roughly $30.

It's about one inch higher, maybe an inch and a half.

It's constructed of .125 - .132 5052 aluminum.

[Rambo]

The only concern with the design is the side to side motion. The downward payload is fine but the side way is the one thing you need to address. I don't want the chair to collapse side way. Any thoughts of adding some support like this to your design?

[kayachapi]

A lot of the places that I fish, don't have any place to clean fish. Now after a long day on my but, I can stand up and take care of my fish.

[yak-fishing-socal]

Nice

Sent from my LG-H810 using Tapatalk

[Geno Machino]

agreed

[Richard Yan]

Hi guys, this will be my first trip in La Jolla tomorrow morning! Please let me know if you have any suggestions, thanks! Also I have a tandem island, please let me know if someone available & want to come, I will be the La Jolla shoreline park before 5am. Thanks!


Sent from my iPhone using Tapatalk

[cell128]

Only if u do all the paddling lol.... I'm not the one to give advice as I haven't got my lj yt....make sure drain plug is in and go have fun???

[Richard Yan]

Thanks any way! Good 9!


Sent from my iPhone using Tapatalk

[Redeyejedi]

Revised bait tank:
I was using an old paint bucket/ 5g. and it worked ok. same old t-500 and 6v battery. i did not have a lid, and sometimes birds could see what was in the bucket. i scored an old olive jar from a friend and drilled six 3/8" holes and it drains at same pace as 6v intakes. the olive jar is a tad wider and shorter, which lowers its COG a little bit, and smaller lid seems it would be more managable. poolside tests look good, will report real world tests after a few gos.

http://i.imgur.com/dlCAx2zl.jpg

[yak-fishing-socal]

Revised bait tank:
I was using an old paint bucket/ 5g. and it worked ok. same old t-500 and 6v battery. i did not have a lid, and sometimes birds could see what was in the bucket. i scored an old olive jar from a friend and drilled six 3/8" holes and it drains at same pace as 6v intakes. the olive jar is a tad wider and shorter, which lowers its COG a little bit, and smaller lid seems it would be more managable. poolside tests look good, will report real world tests after a few gos.

http://i.imgur.com/dlCAx2zl.jpg
I like the size of that thing but the color might make it to hit for bait when the sun is out

sent from my G4 on tapatalk app

[Redeyejedi]

I like the size of that thing but the color might make it to hit for bait when the sun is out

sent from my G4 on tapatalk app

water shouldn't heat up faster than it's being replensished. if it does become an issue, nothing some weight-reducing white rattle can wouldn't fix. and then i could paint it to look like a rabid gaurdgull and it may ward off annoying flying rats. who knows.
will do a temp test when marine layer burns off.

[HobieScot]

Cheap Tricks (No, not the 70’s rock ’n’ roll band)


I enjoy kayak fishing not only for the thrill of catching fish while seated six inches off the ocean in the middle of nowhere, but also for the many creative ways of outfitting the kayak and creating kayak-related fishing gear. Saving a few bucks doesn’t hurt either. A few that work for me:




1699<O:p></O:p>
1 - Fishfinder (Eagle) plug protection: A 3/8” screw protector cover, available in the parts bins at Home Depot or Lowe’s, for around $.50. For use on those days when you don’t attach your fishfinder or if you store your yak outside.



1700<O:p></O:p>
2 - Reel Covers: Rather than pay eight bucks and up for a reel cover, which I’ll probably lose anyway, I make my own for about $1.25 from one of those soda/beer can neoprene insulators, and a piece of Velcro strap. Can coolers about $1 at Walmart and a pack of the Velcro straps for a few bucks from Walmart, Home Depot, etc. These insulated can “koozies” seem to fit calcuttas, lunas, and small avets pretty well and can help eliminate a lot of future “boat rash” on the reel.



3 - Sacrificial Wear Strips: Several layers of duct tape strips on the keel of your yak, and some transparent packing tape strips on the critical areas of that nice gold baitcaster you just got. They’ll need to be replaced every few trips.



1701<O:p></O:p>
4 - Rod Cork Grip Protection: I spray the cork grips on my inshore rods with Scotchguard, the type for outdoor goods like tents and such. Helps make the grips easier to clean and prevents blood and grime from getting ground into the cork. Will take overnight to dry but doesn’t seem to discolor the cork.


<O:p>1702</O:p>
5 - Paddle Leash: Can’t seem to figure out why someone would spend big bucks on some super light, high-end paddle, just to save a few ounces of weight, and then tether it to the yak with a 10 ounce wet leash. I make mine from some thin poly rope – weighs next to nothing and doesn’t stay wet.

I know the original post is an oldie but a goodie but here is my take on how to save the cork on our rods. I picked up some electrical shrink tape and slid it over the cork then used a heat gun to shrink it into place. Now it has a water proof cover and nice grip to it. I've been doing this for years.

My second tool I use as a de hooker for shark or other fish you don't want to mess with trying to remove the hook from. It's basically an adjustable painters pole with an eyelet screwed and gorilla glued into the end then bent into the shape I wanted. It adjusts out to 4 feet if needed. It's basically a cheap knock off of a commercial one. But I wanted it to be adjustable so I can use it on the different types of boats I fish on. It works pretty well and keeps you from having to cut the leader and leave the hook in the Shark when you release it. Just hook the line and slide down to the bend in the hook and give a couple of hard sharp downward strokes and the hook usually pop out without much fuss!
16029

[AI_Fish]

I did not have the wire, and needed something asap, so used 100# mono.
http://i610.photobucket.com/albums/tt182/AI_Fish/inlet%20bait%20tank_zpsgck5itp6.jpg (http://s610.photobucket.com/user/AI_Fish/media/inlet%20bait%20tank_zpsgck5itp6.jpg.html)
You might want to do something like this to keep kelp polyps, grass and crap out of the intake tube of your new bait tank. I used pure silver wire bought from a bead shop so it won't corrode. Not as simple as a screen, but I like the way it looks and works. I know it won't fall off.

http://i273.photobucket.com/albums/jj209/WaynePhoto_bucket/Retrofit5.jpg

Also, be careful of the collar around the outflow tube. It can come loose if your not careful.

Wayne

[yak-fishing-socal]

Finally got around to making a bait tank
Nothing crazy just simple and Functional just need to add two rod holdershttp://images.tapatalk-cdn.com/15/07/14/be564ebf2137e7fcbfc88031c57f8ab8.jpg

🍻🐟

sent from my G4 on tapatalk app

[NaH20DIVER]

Contemplating making a livewell from scratch, I decided to go the simple route and make a bait bullet out of ABS pipe (works better than PVC). All from Home Depot for $10.

1 4" ABS pipe
2 4" ABS shower grates
Bottle of Marine Goop
10' rope to tie off

I gooped the back end shut.
Used a drill bit to make holes through the other end and shower grate together, so I can run a slipknot through the holes to open and close bait bullet.

It works great, my bait stayed plenty active for hours in there. and not too much drag since the shower grates are flush with pipe.

Can anyone share their ideas on how to make a sliding door? Would be much easier to grab a bait.

[ChristLike]

http://i58.photobucket.com/albums/g278/jnuem/Mobile%20Uploads/IMG_20150614_173223.jpg
Four holders on the front 4 on the back ram rods on each side easy access. up and down stairs storage. Cooler fits on top
Sturdy enough to stand up with. Can put bait tank and trolling motor. No more stuff in the way. It will fit the out back
surf lauching not advised haha

[cell128]

You could almost call that a center console!

[old_rookie]

Contemplating making a livewell from scratch, I decided to go the simple route and make a bait bullet out of ABS pipe (works better than PVC). All from Home Depot for $10.

1 4" ABS pipe
2 4" ABS shower grates
Bottle of Marine Goop
10' rope to tie off

I gooped the back end shut.
Used a drill bit to make holes through the other end and shower grate together, so I can run a slipknot through the holes to open and close bait bullet.

It works great, my bait stayed plenty active for hours in there. and not too much drag since the shower grates are flush with pipe.

Can anyone share their ideas on how to make a sliding door? Would be much easier to grab a bait.

Suggest drilling holes along the tube to allow water in and out faster - haven't done tests if that increases drag or not.

[Rocketfish]

What do you think of this? looks like it could be used in conjunction with that trolley system maybe? I wonder if the wet chord will mess up the leash.

http://www.wideopenspaces.com/diy-ingenious-kayak-fishing-anchor-retractable-dog-leash/

[addicted2sp33d]

http://i58.photobucket.com/albums/g278/jnuem/Mobile%20Uploads/IMG_20150614_173223.jpg
Four holders on the front 4 on the back ram rods on each side easy access. up and down stairs storage.
Sturdy enough to stand up with. Can put bait tank and trolling motor. No more stuff in the way. It will fit the out back
surf lauching not advised haha

http://www.quickmeme.com/img/a0/a07cc3d666c9e75a579e5c6f9db10e1476a517a80fa2e2b7c7 31a359cd1045d9.jpg

[Hunters Pa]

http://i58.photobucket.com/albums/g278/jnuem/Mobile%20Uploads/IMG_20150614_173223.jpg
Four holders on the front 4 on the back ram rods on each side easy access. up and down stairs storage.
Sturdy enough to stand up with. Can put bait tank and trolling motor. No more stuff in the way. It will fit the out back
surf lauching not advised haha


Looks very well thought out. One question - what do you do when a bigger fish makes a run aft?

[ChristLike]

Looks very well thought out. One question - what do you do when a bigger fish makes a run aft?


i am sorry but what does (AFT) mean. i spent a few minutes looking for the acronym online so i wouldnt look uncool, but i have a headache now lol

WHAT IS AFT

[ful-rac]

Fore - Front, Bow
Aft - Back, Stern

[Fishin Phil]

https://youtu.be/G55pLj8KhRM

[surfrider]

After almost losing my YT to a Hammer, while on a fish clip a couple weeks back, I decided to get an insulated fish bag to accommodate my long paddles in hot temps and sharky waters. Found a nice product on Amazon for $120, but procrastinated too long before ordering and wanted to fish last weekend. So, I went to Lowes and bought some reflective insulation material, Silicone caulk, Velcro pads, and foil tape. $35 and an hour later, I had a Redneck fish bag to fit perfectly in the rear and under the bungies of my Stealth-14! I took (2) 7lb bags of ice; which I kept below in a collapsible cooler in the front hatch, until needed. After picking up a small YT and a Bonito, I emptied one bag of ice in the foil bag along with the bled fishes. 2 nice 15-16lb YT tail and a Bonito later, I added the second bag of ice. Caught a 3rd respectable yellowtail on the paddle in, which I slid under the bag, being it was already bulging! I did roll it in the surf, not surprising with my heavily loaded yak plus the added 80lbs of fish in the trunk. BUT, surprising the bag held up nicely, and was floating alongside and easy to retrieve. Had to look around for a minute to find the "loose" YT being tossed in the surf; which a nice gal retrieved for me, during this sharky "closed-beach" day in LaJolla! After a 10 hour day on the water, I still had a 3/4 bag of un-melted ice, and the fish were nice and cool. The only difficulty was cleaning the bag.... which I expected would be a one-time disposable and shreaded from fins anyhow? I simply opened up one long seam to wash thoroughly which I will later need to retape. Caulk did not do much for adding strength, but did keep the blood and fish juices from draining through the scupper! Also on a bad fish day, it could double as a tanning reflector..... or on a real bad day, a good way to signal aircraft or give a shark something to chew on (maybe they love popping bubbles too?)! :D

P.S. cooler in the pic is Mega-size with a 39" I.D. <!-- attachments -->

[Cbad Mike]

After almost losing my YT to a Hammer, while on a fish clip a couple weeks back, I decided to get an insulated fish bag to accommodate my long paddles in hot temps and sharky waters. Found a nice product on Amazon for $120, but procrastinated too long before ordering and wanted to fish last weekend. So, I went to Lowes and bought some reflective insulation material, Silicone caulk, Velcro pads, and foil tape. $35 and an hour later, I had a Redneck fish bag to fit perfectly in the rear and under the bungies of my Stealth-14! I took (2) 7lb bags of ice; which I kept below in a collapsible cooler in the front hatch, until needed. After picking up a small YT and a Bonito, I emptied one bag of ice in the foil bag along with the bled fishes. 2 nice 15-16lb YT tail and a Bonito later, I added the second bag of ice. Caught a 3rd respectable yellowtail on the paddle in, which I slid under the bag, being it was already bulging! I did roll it in the surf, not surprising with my heavily loaded yak plus the added 80lbs of fish in the trunk. BUT, surprising the bag held up nicely, and was floating alongside and easy to retrieve. Had to look around for a minute to find the "loose" YT being tossed in the surf; which a nice gal retrieved for me, during this sharky "closed-beach" day in LaJolla! After a 10 hour day on the water, I still had a 3/4 bag of un-melted ice, and the fish were nice and cool. The only difficulty was cleaning the bag.... which I expected would be a one-time disposable and shreaded from fins anyhow? I simply opened up one long seam to wash thoroughly which I will later need to retape. Caulk did not do much for adding strength, but did keep the blood and fish juices from draining through the scupper! Also on a bad fish day, it could double as a tanning reflector..... or on a real bad day, a good way to signal aircraft or give a shark something to chew on (maybe they love popping bubbles too?)! :D

P.S. cooler in the pic is Mega-size with a 39" I.D. <!-- attachments -->

I like it.
Good job and thanks for sharing.

[ctfphoto]

Cost: Free with a rock and I guess the forfeit of the CRV.

[yak-fishing-socal]

Okay so I totally failed miserably at trying to make a rod pod Center Hach tray anybody ever make one or bought one from somewhere here's what I had, did not hold up to my standards at all I guess I need to put more time ithttp://images.tapatalk-cdn.com/15/09/01/fd4c1b1a9ce4d3e4a82471a82cbc1e4d.jpghttp://images.tapatalk-cdn.com/15/09/01/9545475b16cb0bd268766610e3015793.jpghttp://images.tapatalk-cdn.com/15/09/01/91c3fdf1395e0d5e804bd96eb6304a3a.jpg

sent from my thumbs on my G4

[Mr. NiceGuy]

i am sorry but what does (AFT) mean. i spent a few minutes looking for the acronym online so i wouldnt look uncool, but i have a headache now lol

WHAT IS AFT

Creative genius works like this. The world would be a far less interesting place without non-linear thinkers.

:)

[Divad]

Nice Idea, try using that as a mold and wrap it with fiberglass.

[yak-fishing-socal]

Nice Idea, try using that as a mold and wrap it with fiberglass.
Thanks that's a good idea iv been wanting to try a fiberglass kit

sent from my thumbs on my G4

[igotpron]

Thanks that's a good idea iv been wanting to try a fiberglass kit

sent from my thumbs on my G4

Just a thought but this kinda looks like a garden flower pot. Next time your at homedepot might want to take a look. Could be way off but that idea popped into my head when I saw the shape.

[yak-fishing-socal]

Lol it is that's what I hacked up

sent from my thumbs on my G4

[igotpron]

Ahh yes looks familiar. They had 24" and 36" models. Was the 24 to big?

[ChristLike]

Looks very well thought out. One question - what do you do when a bigger fish makes a run aft?

Peddle system with rudder hands free turn around/ follow the fish

[Hunters Pa]

Peddle system with rudder hands free turn around/ follow the fish


Cool! Didn't mean to sound like I was throwing rocks at your design. Just wondering how you would follow a runner. Guess I need to practice my 180 degree turns a bit more

[yak-fishing-socal]

Ahh yes looks familiar. They had 24" and 36" models. Was the 24 to big?
Yea had to cut it down and it still didn't fit properly because of the hatch cover

sent from my thumbs on my G4

[WARRIORMIKE]

I added some rail padding that is more commonly used for Baseball Fields to my trailer extender

Flat padding $ 9.95 per foot - The "t" bar is about 3ft across

Comes in Flat pad or Round pad at 2-1/2 in diameter

The flat pad is what I currently have on it. Just need to tie it down with zip ties . The round pad is what I have in my hands

The round padding is $12 per foot

Graphics are extra

http://i1234.photobucket.com/albums/ff404/mikesphotos77/IMG_13391.jpg (http://s1234.photobucket.com/user/mikesphotos77/media/IMG_13391.jpg.html)




I will be bringing these to the JAL event if interested

Mike

[DanaPT]

So had real miserable cart wheels. the kayak would slip off, I felt like an ox plowing a field pulling across the sand.

This was my second set of wheels of this type. Turns out I found a "never flat" all purpose wheel at home depot. Have to buy a set of 4 approx $60.

the wheels have 2 bearings in each and are 5/8s. so a 5/8 lag bolt on each side almost exactly fits perfect into the old axle. With a bit of electric tape at a couple of spots for a super snug fit, I hammered them into the old axle and they are snug and spin really well. I may try to drill a tap screw or something. we'll see.

A few outings so far. a world of difference vs. what I had. Let's see if it holds up longer than a year.

[Deez Knots!]

Hey guys. I saw a guy with one of these but i couldn't find any DIY's so i decided to make one:

Need a place to store your irons?:jig::jig::jig::jig:
<a href="http://s1024.photobucket.com/user/DeezKnots/media/513b3da1-9679-4b1c-b0a8-3f4e46801658_zpsjzebo9ub.jpg.html" target="_blank"><img src="http://i1024.photobucket.com/albums/y304/DeezKnots/513b3da1-9679-4b1c-b0a8-3f4e46801658_zpsjzebo9ub.jpg" border="0" alt=" photo 513b3da1-9679-4b1c-b0a8-3f4e46801658_zpsjzebo9ub.jpg"/></a>
What you need:
Bucket
Bucket Lid
Utility Knife
Dremel tool
Drill Bit
Drill (You can use dremel tool as well)
IRONS!

Cut the inner circle off and the outer lip off with the utility knife!
<a href="http://s1024.photobucket.com/user/DeezKnots/media/4b5698db-3756-44b2-a2d9-b4dd941f44d0_zpsvlabslji.jpg.html" target="_blank"><img src="http://i1024.photobucket.com/albums/y304/DeezKnots/4b5698db-3756-44b2-a2d9-b4dd941f44d0_zpsvlabslji.jpg" border="0" alt=" photo 4b5698db-3756-44b2-a2d9-b4dd941f44d0_zpsvlabslji.jpg"/></a>

The outer lip wraps around the outside of the bucket (this is the part that has to go) and the inner lip stays inside the bucket (do not cut this off)
<a href="http://s1024.photobucket.com/user/DeezKnots/media/46b58a88-4743-4065-ace6-8370ff8dcdfc_zps9txeknls.jpg.html" target="_blank"><img src="http://i1024.photobucket.com/albums/y304/DeezKnots/46b58a88-4743-4065-ace6-8370ff8dcdfc_zps9txeknls.jpg" border="0" alt=" photo 46b58a88-4743-4065-ace6-8370ff8dcdfc_zps9txeknls.jpg"/></a>

Smooth out lid with dremel
<a href="http://s1024.photobucket.com/user/DeezKnots/media/44eca03d-379b-4bed-96de-c87f555de50e_zpse6glvetl.jpg.html" target="_blank"><img src="http://i1024.photobucket.com/albums/y304/DeezKnots/44eca03d-379b-4bed-96de-c87f555de50e_zpse6glvetl.jpg" border="0" alt=" photo 44eca03d-379b-4bed-96de-c87f555de50e_zpse6glvetl.jpg"/></a>

Slide lid down halfway and drill out holes
<a href="http://s1024.photobucket.com/user/DeezKnots/media/75b3b109-0575-4df8-93ac-8176020e50b9_zpsujxqbufk.jpg.html" target="_blank"><img src="http://i1024.photobucket.com/albums/y304/DeezKnots/75b3b109-0575-4df8-93ac-8176020e50b9_zpsujxqbufk.jpg" border="0" alt=" photo 75b3b109-0575-4df8-93ac-8176020e50b9_zpsujxqbufk.jpg"/></a>

Now add your irons in and voila! You have a safe way of transporting and storing your irons. The lid sits tightly inside and does not require glue; you can remove the lid and use the bucket when needed.

<a href="http://s1024.photobucket.com/user/DeezKnots/media/44bd3ede-74b5-47c3-bdb3-2812603a2612_zpssh48fud6.jpg.html" target="_blank"><img src="http://i1024.photobucket.com/albums/y304/DeezKnots/44bd3ede-74b5-47c3-bdb3-2812603a2612_zpssh48fud6.jpg" border="0" alt=" photo 44bd3ede-74b5-47c3-bdb3-2812603a2612_zpssh48fud6.jpg"/></a>

I drilled my holes out with my dremel tool so it came out looking pretty rough; I also did not bother smoothing out the inner circle. If you want yours looking better than mine, use a drill for the holes and smooth out the inner circle with dremel

[kayachapi]

I did this to get my wife out with me. She does not have the confidence in her vision and balance to go it alone. It sails pretty well, surprisingly well. I have not had another person on it yet, and don't know how it will act, but expect it to be fine. No Hobies were harmed in this mod. Everything is removable. I know, I'm a Kook.

[Hammerhead_77]

I broke the plastic Hobie wheels bouncing my fully loaded yak off a curb on the way back to the truck... I wanted something, wider, stronger and less expensive than the nice fat Hobie sand wheels.

HFT had a sale: $5 each. Axle cost $9. Bolts, washers, nuts, cotter pins, $5. total rated capacity for this should be over 600 lbs...more than needed for a 180 lb PA14!
http://www.bigwatersedge.com/bwevb/attachment.php?attachmentid=17459&stc=1&d=1447713281

The hubs on these bolt in, so I replaced the bolts with longer ones to create dualies and threaded the end of the axle for a nut with a cotter pin to keep it from walking.
http://www.bigwatersedge.com/bwevb/attachment.php?attachmentid=17460&stc=1&d=1447713281

[surf-bum]

Okay so I totally failed miserably at trying to make a rod pod Center Hach tray anybody ever make one or bought one from somewhere here's what I had, did not hold up to my standards at all I guess I need to put more time ithttp://images.tapatalk-cdn.com/15/09/01/fd4c1b1a9ce4d3e4a82471a82cbc1e4d.jpghttp://images.tapatalk-cdn.com/15/09/01/9545475b16cb0bd268766610e3015793.jpghttp://images.tapatalk-cdn.com/15/09/01/91c3fdf1395e0d5e804bd96eb6304a3a.jpg

sent from my thumbs on my G4

You can make a tray out of fiberglass. If you are savy with it. I grabbed some for sale signs, taped them together and taped a cardboard plate under it after I stuck it in the hatch. Laid the chopped strand mat (fiberglass sheets) in the molded bucket, wait for it to dry, then take it out. I stuck a piece of foam the hull to raise the mold to the height I wanted. Marked it off, and cut it off. Then mold flanges on the rim to make the seal.

Kind of confusing, but I actually made my own bait tank like this. you can DM me or call if you need pics. 808-722-4377

[miteofthesun]

Here is my interpretation of a simple and cheap rod leash.

It needs to be simple, corrosion resistant, strong, and inexpensive. Everything but the bungee was purchased at Home Depot.

Here is what you will need:
3/16" bungee cord ($9.50/50 ft. on eBay)
paracord ($4)
plastic snap buckles ($0.99 for two pairs)
plastic S-biners ($0.99/ea.)
lighter
tape measure
1/16" SS wire

http://i113.photobucket.com/albums/n213/miteofthesun/20151118_102335_zpsy0fipp9c.jpg

I began by making a lanyard, which has a female snap buckle on one end, and a loop on the other. The length of the loop can be adjusted to fit your needs. The plastic snap buckles came with instructions on how to make the lanyard. It's about as easy as tying your shoes.

http://i113.photobucket.com/albums/n213/miteofthesun/20151118_111308_zps7vgt8xzc.jpg

I made up some DIY stainless steel hog rings out of 1/16" SS wire.

http://i113.photobucket.com/albums/n213/miteofthesun/20151120_111500_zpswzkq9q6b.jpg

After approximating my shock cord length, I attached a S-biner to one end, and the male snap buckle to the other. Then compress the SS hog rings around the bungee.

http://i113.photobucket.com/albums/n213/miteofthesun/20151120_113810_zps5fxeamtv.jpg

That's it! The loop end of the lanyard can be modified to attach to your particular rod/reel. It can be easily looped through reel clamps that have a ring. Velcro could be ran through the lanyard loop for attaching the leash to the rod.

[MITCHELL]

I have to get pictures....:cool:

[MITCHELL]

All rights reserved for profit for DukeMitchell....

[MITCHELL]

I only use my cell phone for downloads and pictures aren't unloading stay tuned :cool:for more great stuff I'm in this rig for under $900 for everything

[YakDout]

Is that Nos on the side?

[Deez Knots!]

Is that Nos on the side?

lol looks like floats on each side to keep it from flipping.
oh the NOS days lol :doh:

[MITCHELL]

The floats make it as stable as a 14 ft aluminum boat and made to last a lifetime

[MITCHELL]

:DWorks good for big surf you slide in sideways in whitewater

[MITCHELL]

Drop keel in high wind and go straight as an arrow
Mounts in Oar locks in canoe

[MITCHELL]

Fold down locking pin to go through surf and when you sail back just let it twist forward to come back through surf two sails the main and the jib sail..

[Dirty Curti]

So, originally I mounted my transducer inside the hull with goop. It worked pretty good as I had nothing to reference it by except videos on youtube. At one point, when I was out fishing a couple of weeks ago, I noticed that when enough water was in the hull to cover the transducer it worked a lot better. So I've seen where others have made water boxes for their transducer so I decided to make one around my transducer.

http://i1187.photobucket.com/albums/z388/PostNetOceanside/20151206_141033_zps7xykrg7v.jpg (http://s1187.photobucket.com/user/PostNetOceanside/media/20151206_141033_zps7xykrg7v.jpg.html)

I took it out yesterday to test it and it gave me a much more detailed image of what was under the boat.

http://i1187.photobucket.com/albums/z388/PostNetOceanside/20151206_140819_zpsn5gmzmcb.jpg (http://s1187.photobucket.com/user/PostNetOceanside/media/20151206_140819_zpsn5gmzmcb.jpg.html)

So I recommend this if you don't want to mount your transducer outside of the kayak.

[MITCHELL]

Pvc bracket

[MITCHELL]

To be a bike builder and you wind up a fisherman.... bike boy says make some noise ba...ba...bah.....I guess I was always a modified kind of guy.....400cc twin hardtail....:the_finger:if it were a fishing lure it would be called a rattle trap......

[octico]

I came across this interesting video on how to make your own Wheelz


https://www.youtube.com/watch?v=HKw50xNhDpU

[MITCHELL]

14 ins plastic wheels Ace hardware you have to order them not a stock item..... I just flip my kayak on its side and hook clip and flip back over no problem pulling though loose sand....;)

[MITCHELL]

Not so smart after all ha ha

[MrPukaShell]

I came across this interesting video on how to make your own Wheelz


https://www.youtube.com/watch?v=HKw50xNhDpU

Here is another version of the build

https://www.youtube.com/watch?v=TDM8qQGHYbs

[battleborn]

Hey guys. I saw a guy with one of these but i couldn't find any DIY's so i decided to make one:

Need a place to store your irons?:jig::jig::jig::jig:
<a href="http://s1024.photobucket.com/user/DeezKnots/media/513b3da1-9679-4b1c-b0a8-3f4e46801658_zpsjzebo9ub.jpg.html" target="_blank"><img src="http://i1024.photobucket.com/albums/y304/DeezKnots/513b3da1-9679-4b1c-b0a8-3f4e46801658_zpsjzebo9ub.jpg" border="0" alt=" photo 513b3da1-9679-4b1c-b0a8-3f4e46801658_zpsjzebo9ub.jpg"/></a>
What you need:
Bucket
Bucket Lid
Utility Knife
Dremel tool
Drill Bit
Drill (You can use dremel tool as well)
IRONS!

Cut the inner circle off and the outer lip off with the utility knife!
<a href="http://s1024.photobucket.com/user/DeezKnots/media/4b5698db-3756-44b2-a2d9-b4dd941f44d0_zpsvlabslji.jpg.html" target="_blank"><img src="http://i1024.photobucket.com/albums/y304/DeezKnots/4b5698db-3756-44b2-a2d9-b4dd941f44d0_zpsvlabslji.jpg" border="0" alt=" photo 4b5698db-3756-44b2-a2d9-b4dd941f44d0_zpsvlabslji.jpg"/></a>

The outer lip wraps around the outside of the bucket (this is the part that has to go) and the inner lip stays inside the bucket (do not cut this off)
<a href="http://s1024.photobucket.com/user/DeezKnots/media/46b58a88-4743-4065-ace6-8370ff8dcdfc_zps9txeknls.jpg.html" target="_blank"><img src="http://i1024.photobucket.com/albums/y304/DeezKnots/46b58a88-4743-4065-ace6-8370ff8dcdfc_zps9txeknls.jpg" border="0" alt=" photo 46b58a88-4743-4065-ace6-8370ff8dcdfc_zps9txeknls.jpg"/></a>

Smooth out lid with dremel
<a href="http://s1024.photobucket.com/user/DeezKnots/media/44eca03d-379b-4bed-96de-c87f555de50e_zpse6glvetl.jpg.html" target="_blank"><img src="http://i1024.photobucket.com/albums/y304/DeezKnots/44eca03d-379b-4bed-96de-c87f555de50e_zpse6glvetl.jpg" border="0" alt=" photo 44eca03d-379b-4bed-96de-c87f555de50e_zpse6glvetl.jpg"/></a>

Slide lid down halfway and drill out holes
<a href="http://s1024.photobucket.com/user/DeezKnots/media/75b3b109-0575-4df8-93ac-8176020e50b9_zpsujxqbufk.jpg.html" target="_blank"><img src="http://i1024.photobucket.com/albums/y304/DeezKnots/75b3b109-0575-4df8-93ac-8176020e50b9_zpsujxqbufk.jpg" border="0" alt=" photo 75b3b109-0575-4df8-93ac-8176020e50b9_zpsujxqbufk.jpg"/></a>

Now add your irons in and voila! You have a safe way of transporting and storing your irons. The lid sits tightly inside and does not require glue; you can remove the lid and use the bucket when needed.

<a href="http://s1024.photobucket.com/user/DeezKnots/media/44bd3ede-74b5-47c3-bdb3-2812603a2612_zpssh48fud6.jpg.html" target="_blank"><img src="http://i1024.photobucket.com/albums/y304/DeezKnots/44bd3ede-74b5-47c3-bdb3-2812603a2612_zpssh48fud6.jpg" border="0" alt=" photo 44bd3ede-74b5-47c3-bdb3-2812603a2612_zpssh48fud6.jpg"/></a>

I drilled my holes out with my dremel tool so it came out looking pretty rough; I also did not bother smoothing out the inner circle. If you want yours looking better than mine, use a drill for the holes and smooth out the inner circle with dremel


Awesome Jig buckets rule...been trying to find a commercial product now I can just DIY. Thanks for the post.

[JohnMckroidJr]

PA14 with oversized ruddar, and ruddar protector for transport

[JohnMckroidJr]

Downrigger Mounted

[rampage559]

I just got my first Hobie Outback this last sat and my first mod was done that Sunday. I will be doing mostly bass fishing and trout fishing while camping, so two of the most important things to me was an ice chest and tackle storage.

Locally in Fresno it can reach 105 degrees in the summer, no shortage of cold beverage is acceptable on this days lol. Up in the mountains while camping a nice craft beer while trolling makes the day since I wont be driving.

Initially I was looking for a basket the size of a milk crate but that I can enclose easily, so I do not loose my gear. After an hour in lowes of not finding anything that satisfied my itch. I ran across a ice chest and thought to my self, this could work. I had to get two scrape pieces and silicon them in to cover the entire length of the chest.

I decided to partition the chest with plexiglass from lowes scrap pile (1$ per scrap) with some silicon it made for a nice permanent solution. I may add foam though for better insulation between partitions and to keep my tackle from making racket.

I ran into an issue with my rode holders and luckily I mocked it up and realized I could not open the chest unless they were on the front. So I attached the front of the chest and got it in the Yak. I tested this out and did not like it at all. So i started to brain storm and took off the hinges and said well I can just make it so the top completely comes off from any side.

I then noticed if i flipped the hinges they would make great tie down points to anchor the cooler. Turns out little tie that I used to keep the front of the cooler shut makes a good hinge and allows me to open the cooler with no issue. You might be confused here with what I did, so its a good thing I have some pics.

I also made two rode leashes out of old cell phone chargers.

Total cost was 85$ at lowes, however this expense also covered a bucket of bungees, 15$ worth of ties for my house pole storage and the stuff to make the rod leashes minus the cell chargers (carabiner and ties)

[Chuck D]

So, I got my new sweet Limited Edition from Andy, would never get a yak from anyone else:cheers1: Decided that I would like to add some rails because I was sure they would be useful for many purposes (even if not for what I originally intended). So I ordered 2 small rails 9" I think. At first I thought for sure to hold my FF Head unit and then a couple rod holders would be nice (I always add scottys and they work) got a couple railblazas I can add to the mix from my adventure. Installed on the left, fits perfect over the cup holder. On the right it just does't match up with the Outback design so machined an inch or so off and fit like a charm. Once I drilled the 4 holes, gooped it up, added the washers and clamped down. Here are some pros and cons that I found after a month of use, overall I love the addition to the yak!

Pros:
hold to control yak when launching/landing in surf
use to help lift yak over stairs at LJ Launch:)
holds my FF solid with a ram ball/hrail attachment and lets me adjust at many levels
can attach you pliers or any gear to it that you do not want floating/sinking away
squid lights tie off to it
hold my beer can in more solid then before
many h-rail attachments, want to attach go pro in the future...
can hold for stability
can use to help tie knots and get good tension
fits on my jrack the same as before
place to wrap a lock around
watertight

Cons
wanted rod holders and H-Rail attachment would move under pull of trolling baits and did not feel comfortable if hit with a bit strike (therefore, no rod holders for me, ended up adding scotties in the front like I always have)
Beer bottles don't fit too well anymore on the L side

[Iceman]

Nice Chuck! I just set up an Outback with the rails and an H Bar that attaches to the rails.

http://www.bigwatersedge.com/bwegallery/data/500/IMG_5645.JPG

[ctfphoto]

Chuck, thank you. I am still on the fence on these. Did you get a sail for your outback?

[Chuck D]

Chuck, thank you. I am still on the fence on these. Did you get a sail for your outback?

No problem CTF. No, I don't think I will get a sail for the outback since I am lucky enough to have an island adventure. I am not sure that I would be too impressed with a sail on the outback, it would be too much clutter for me in that vessel. I am sure it would work to get you out longer range tho...

[ctfphoto]

No problem CTF. No, I don't think I will get a sail for the outback since I am lucky enough to have an island adventure. I am not sure that I would be too impressed with a sail on the outback, it would be too much clutter for me in that vessel. I am sure it would work to get you out longer range tho...

I figured as much as you do have the island. Outback sail probably way to slow for you ;)

After seeing you on your island looking for tuna, you really got me thinking. I have "Island Fever" now. Most likely wanting a tandem. My buddy swears he is buying one so I get to go along for the ride. I need to figure out how to talk the wife into getting one for this summer.

And I second you about buying from Andy, he is the go to guy.

[EastLosYaker]

Damn Chuck, you store the new outback in the living room? Talk about tlc.

[Mr. NiceGuy]

Compact size floating sabiki hook removers from wine corks and coat hanger wire.

There's a small "L" bend at the butt end and a dab of epoxy on the wire at both ends of the cork. Small enough to conveniently stow in my Outback tackle bucket. Long enough to be comfortable in the hand.

http://www.pbase.com/image/162733077.jpg

[jorluivil]

Great idea but you should have made the tag end of the loop longer. Because the tag end of the loop is small the sabiki line will slide off of the loop when you try to shake the bait off.

Other than that it looks pretty cool.

[FullFlavorPike]

Compact size floating sabiki hook removers from wine corks and coat hanger wire.



So, how would these actually work? If you don't mind a somewhat painstaking description...I can't imagine it, try as as I might.

[Mr. NiceGuy]

Great idea but you should have made the tag end of the loop longer. Because the tag end of the loop is small the sabiki line will slide off of the loop when you try to shake the bait off.

Other than that it looks pretty cool.

Good point. I have not tried these yet. I will re-bend one and report back. Thanks.

Is the cork hook supposed to engage the sabiki line, or the sabiki hook?

My purpose is for making bait with mackerel, etc., ... not catch & release, and not bigger fish.

---

I think you might be suggesting this?

http://ecx.images-amazon.com/images/I/31vVglZTtSL._AC_UL320_SR314,320_.jpg

... not this:

http://thumbs.ebaystatic.com/images/g/aFgAAOSweuxWRzJU/s-l225.jpg


But seriously, I get as much pleasure from drinking the wine as I do making something out of the corks :)

[Mr. NiceGuy]

So, how would these actually work? If you don't mind a somewhat painstaking description...I can't imagine it, try as as I might.

Since I am a relative noob, I am extrapolating information and fiddling at my work bench. It's better for jorluivil or one of the other pros to answer.

There are a few different kinds of de-hooking tools. My purpose is when I bring up a cluster of mackerels, getting them into the bait tank easily with as little damage or trauma as possible, while avoiding re-snagging other prickly sabiki hooks flapping around in the melee.

The purpose of this kind of de-hooking tool is when you pull the cork hook the opposite direction of the sabiki hook, it turns the point of the sabiki hook downward as you lift, and the fish falls off by it's own weight. It's allegedly much faster, easier and less damaging than fiddling with fingers or a needle-nose pliers when you have multiple slimy fish bouncing around in your lap.

My thought was to keep it small and simple so it's not in the way. The Hobie Outback tackle bucket under the hatch is not very big. I don't like loose clutter rolling around when I'm fishing.

[GregAndrew]

The longer/wider tag end is for speed of use and keeping the line in place. The wide end makes it quicker to wrap around your sabiki line. The longer tag end helps keep the sabiki line inside while your bait wiggles.

You wrap the tag end around your sabiki just above the bait. Then you slide it down the sabiki while pulling back and up on the dehooker and pushing forward and down on the sabiki line above (you can substitute left and right for back and forward). The hook will wrap the end of the tool, and continuing to straight up and down will point the hook down. Then a simple jerk motion, with both hands in the same downward direction, should dislodge the barb and free the bait. It should take less than a couple seconds per bait, which can be crucial on the days where you only have it under you a couple times for a short time.

[pingpangdang]

I use wooden chopsticks you get from panda express etc. I don't crack them apart so they are stronger.

Once the stick slides down into the inner bend of the hook I hold the mac over the livewell and turn the hook upside down with the chopstick and the fish slides off.

I also debarb the sabiki hooks so the bait slides off quicker and I can hook anything in my yak w/ no worry(no problem getting them to the yak as the bait stays on the hook really well even debarbed)

I can also use the chopstick to push down on a hook that was swallowed near the gut to dehook w/ ease.

For the sabiki itself besides debarbing I use only half...so only 3 sabiki.

For the weight I use a cheap blue and silver jig (something at walmart)...it's heavy and gets the sabiki down fast and it also in my mind triggers the bait to bite the sabiki because it looks like a bigger fish is chasing it's prey.

I also have a hook on the end of the jig and usually get bigger bait on that one.

No problem w/ tangles most of the time as the jig is heavy enough to keep everyone in line.

Free and they float...and if you brought your bento box you don't have to eat w/ your hands!

With the hooks debarbed sometimes I just use my hands...just grab the snell of the hook and turn the hook upside down and they slide right off.

[CKallday71]

So I bought a really cool Black Watch FHG Hand Gaff. It's aluminum with a stainless steel ridiculously sharp and easily replaceable tip. After that I had my buddy that makes custom pistol holsters from Kydex make me a holster for it that I can leash on to my kayak or strap to my belt or PFD with a D-ring or a plastic buckle. These are pictures of the unfinished product. The holster is in the prototype development stages right now. I'll post finished pictures when it's done. The hand gaff is going to get some para-cord on the handle too for better grip when wet.

[619-SWIM-DOG]

I realized I didn't have a crate/rod holder for Baja. Well took care of that. It's big for plenty of storage.
Depth 12″ Width 22″ Height 10″

[farreola]

And you can buy a lid for it. Clips on with side clips. I have the toolbox set and had seen this box, never thought of converting it into what you did. Great idea.

[CKallday71]

Finally got my hand gaff and custom sheeth/holster back.
This thing is light, strong and just crazy looking!

My buddy that made the kydex sheeth does customd holsters, and just about anything you can dream up out of kydex.

[Str8shooter]

My Hobie PA14 garage lift . . . because its one heavy yak, and available storage space is always a premium.

https://youtu.be/pDucTjFJAMA

https://youtu.be/W_M0uwYlYOs

[octico]

My Hobie PA14 garage lift . . . because its one heavy yak, and available storage space is always a premium.

https://youtu.be/pDucTjFJAMA

https://youtu.be/W_M0uwYlYOs

Very cool

[blitzburgh]

My Hobie PA14 garage lift . . . because its one heavy yak, and available storage space is always a premium.

https://youtu.be/pDucTjFJAMA

https://youtu.be/W_M0uwYlYOs

Dude, that is a pro rig right there :cheers1:

[outlawangler]

Short video on rod tip protectors that I added to the Kraken 13.5.

https://www.youtube.com/watch?v=GNvhV-v8HOU

[pingpangdang]

Floating livewell from pipe insulation, zip ties, 3 gallon bucket, and screw on top...All parts from home depot for no more than 20.

Kept macs live all day. Easy to put bait in and I drilled holes on top so it would get lighter when lifted on the kayak if I needed to boogie. Enough water inside to keep fish alive before posting up on the next stop. Then tossed it back in the water to float filling up all the way around the holes to give bait more swim space.

No seals ever messed with it. I've upgraded to a diy livewell using a bilge pump...

This would be better in the bay or lakes.

Just a cheap option18886188871888818889

Sent from my SM-N900T using Tapatalk

[Orca Winfrey]

Thanks! Thank really great. Might try it.

[Mr. NiceGuy]

My Hobie PA14 garage lift . . . because its one heavy yak, and available storage space is always a premium.

https://youtu.be/pDucTjFJAMA

https://youtu.be/W_M0uwYlYOs

Very nice. Where did you buy your 2" side mount pulleys?
The Harbor Freight electric hoist looks like a good fit for your project.

[kayachapi]

1 1/2" PVC. Magnets from an instant screen.

[jorluivil]

Great start................however, I can't imagine all of the crap that will get hung up on that rod let alone the rust that it will build after a few trips. Why did you not use galvanized material?

[kayachapi]

I didn't think about the crap. The bolt and nuts are 2"x 1/4" stainless. I'm hoping it works. If something hangs up, it will just fall away and my signal will get funky. Then I will re-attach.
slow process shaping the PVC so I hope it works.

[kayachapi]

I know everybody has made these to death, but I'm pretty happy with them.

[King Saba]

Neat design. So you just slid the outer layer of the paracord onto the weed whacker line?

[kayachapi]

Neat design. So you just slid the outer layer of the paracord onto the weed whacker line?

Yes, I use a strand of the inner core to tie the loop back, then electrical tape, then heat shrink.

[YOYOYaker]

Here's a link to a video on how to do this.

http://yakchronicles.com/coiled-paracord-gear-leash-tutorial/

[fongman]

I haven't posted on here in a while, so I'll share a few things I made. The first is a fly rod holder. I have some extra RAM accessories so I made it for a RAM 1.5" ball mount. I originally used a bungee cord and lashing hook (OEX) to secure the rod to the rod holder. Recently I modified it to have a rotating collar, like the Scotty Power Lock.

http://i219.photobucket.com/albums/cc146/fongman55/Kayaks%20and%20Accessories/Fly%20Rod%20Holder%20w-Power%20Lock_zps21ayjgeg.jpg (http://s219.photobucket.com/user/fongman55/media/Kayaks%20and%20Accessories/Fly%20Rod%20Holder%20w-Power%20Lock_zps21ayjgeg.jpg.html)

The next are check valves. These will be used in place of the seat plugs in my Hobie Adventure. The parts list: 3/4" PVC male adapter, 3/4" PVC pipe, syringe plunger, and 1/8" SS rod. The video I saw used a 3/4" acrylic ball, but I couldn't find any for the right price. Instead, I found a 6-pack of syringes at Party City for $7. I cut the rod at the indentation, then filed the fins of the plunger so it would slide in the 3/4" PVC pipe. Do not push the pipe all the way into the adapter because you want to allow a gap for more water to pass through. The hole I drilled in the pipe allows the plunger about an 1/8" of clearance from the top. The threaded portion was sawed off above the last 3 threads.

http://i219.photobucket.com/albums/cc146/fongman55/Kayaks%20and%20Accessories/th_Check%20Valve%20Parts_zpsqapixxaw.jpg (http://s219.photobucket.com/user/fongman55/media/Kayaks%20and%20Accessories/Check%20Valve%20Parts_zpsqapixxaw.jpg.html)

http://i219.photobucket.com/albums/cc146/fongman55/Kayaks%20and%20Accessories/Check%20Valve%20Explosion%20Pic_zps8qrto5eo.jpg (http://s219.photobucket.com/user/fongman55/media/Kayaks%20and%20Accessories/Check%20Valve%20Explosion%20Pic_zps8qrto5eo.jpg.ht ml)

[fongman]

The Adventure/Islander seat is below the water line, so the seat plugs must be in place. When water comes over the side, which is frequent, you end up sitting in a pool of water. I found a video on YouTube (AI Seat Riser) that addressed this problem. He used 2-part foam (8 lb) to build up the seat area about 1.5" - 2". Since the water line is now below the seat, he replaced the seat drain plugs with 3/4" PVC pipes. Watch the video (https://www.youtube.com/watch?v=rrdT0gzQPww) if you are interested in making one.

http://i219.photobucket.com/albums/cc146/fongman55/Kayaks%20and%20Accessories/th_Seat%20Riser%20C-Valve%20Placement_zpsmwuypcof.jpg (http://s219.photobucket.com/user/fongman55/media/Kayaks%20and%20Accessories/Seat%20Riser%20C-Valve%20Placement_zpsmwuypcof.jpg.html) http://i219.photobucket.com/albums/cc146/fongman55/Kayaks%20and%20Accessories/th_Seat%20Riser%20Pour_zpsedb1iqqk.jpg (http://s219.photobucket.com/user/fongman55/media/Kayaks%20and%20Accessories/Seat%20Riser%20Pour_zpsedb1iqqk.jpg.html) http://i219.photobucket.com/albums/cc146/fongman55/Kayaks%20and%20Accessories/th_Seat%20Riser%20Removal_zpstuo82fa3.jpg (http://s219.photobucket.com/user/fongman55/media/Kayaks%20and%20Accessories/Seat%20Riser%20Removal_zpstuo82fa3.jpg.html) http://i219.photobucket.com/albums/cc146/fongman55/Kayaks%20and%20Accessories/th_Seat%20Riser%20Ready%20to%20Sand_zps8yv8qh6i.jp g (http://s219.photobucket.com/user/fongman55/media/Kayaks%20and%20Accessories/Seat%20Riser%20Ready%20to%20Sand_zps8yv8qh6i.jpg.h tml) http://i219.photobucket.com/albums/cc146/fongman55/Kayaks%20and%20Accessories/th_Seat%20Riser%20Sanded_zps8uq2ns89.jpg (http://s219.photobucket.com/user/fongman55/media/Kayaks%20and%20Accessories/Seat%20Riser%20Sanded_zps8uq2ns89.jpg.html) http://i219.photobucket.com/albums/cc146/fongman55/Kayaks%20and%20Accessories/th_Seat%20Riser%20installed_zpstewhoinj.jpg (http://s219.photobucket.com/user/fongman55/media/Kayaks%20and%20Accessories/Seat%20Riser%20installed_zpstewhoinj.jpg.html) http://i219.photobucket.com/albums/cc146/fongman55/Kayaks%20and%20Accessories/th_Seat%20Riser%20C-Valve%20Location-1_zpsdypmbvs5.jpg (http://s219.photobucket.com/user/fongman55/media/Kayaks%20and%20Accessories/Seat%20Riser%20C-Valve%20Location-1_zpsdypmbvs5.jpg.html)

In my build, I used the check valves in place of the 3/4" pipes (see my previous post). The keys to remember are: 1) be sure kayak is level, 2) use a release agent on the seat, 3) work fast with the foam since it will set up within 3 - 4 minutes, 4) concrete needs to be rough in order to quickly shape the foam, 5) before painting, use acetone to remove any chemical residue from the foam. A coat of Polyurethane over the paint will make it more durable. Since the seat covers the drain holes, I added channels to the seat riser so the water will be able to drain.

http://i219.photobucket.com/albums/cc146/fongman55/Kayaks%20and%20Accessories/CoD%20Seat%20on%20Riser_zpsahr59m9x.jpg (http://s219.photobucket.com/user/fongman55/media/Kayaks%20and%20Accessories/CoD%20Seat%20on%20Riser_zpsahr59m9x.jpg.html)

Due to the seat being higher, the mounting position for the back rest was also raised. I removed the bungee screw-in plugs used for the paddle keepers and replaced them with the D-ring plugs. The backrest is more comfortable clipped here. Plus it is easier to enter and exit the kayak with the shorter straps. The last modification was to secure the paddle bungee. It is now using a part of the Islander (sail) rigging.

I tested it out on a snotty day on the bay. As was expected, a lot of water came over the side, however, it drained out just as it was designed. The only negative was the hardness of the seat. I'll have to go back to sitting on my kneeling pad. Since I no longer need it under my seat (to raise me up), I'll now use it on top of the seat.

[MITCHELL]

Bingo home made bait rod

[Mr_Fixit]

I find myself changing out a rig from time to time while out there. What to do with those rigs and leaders? You certainly dont want the tangling up or getting snagged on other things - like your leg, feet, pedals... So, I simply spool them up on these. Its a nice way to keep them all arranged, undamaged, easily re-usable, and readily available.

https://www.amazon.com/gp/product/B00Q3XWZJ2/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1

[TJones]

There aren't many like it , cause this one is mine . :D . It has seen many a battery . The first replacement I bought was similar in dimensions and capacity which was rated 7 amp 6 Vlt. I got that battery from fry's electronics for relatively cheap . Yes, 7 amp . That was a long time ago. Of course hobie has upgraded since then to a standard equipped 10 amp battery. Tbe current battery I am using is a Bioenno LIPO4 12 amp. This battery will last me all day and not slow on flow of pump,

[TJones]

What I've realized about these connections, is that they are bulletproof. Even with little care or attention, I have not had any problems. This connector is probably from an 09-10 outback, which was my first Hobie kayak. Yes, I started out on the Dark Side. Anyways, after having so many issues with my fishfinder, I decided to try this connector for my battery power source. I ordered a couple sets of connectors from a dealer and head them shipped. The complete package lists for about 20.00$. The package includes male/ female ends and pre-greased wire caps that even have a dust cap for the back of screw on wire connector . I have never seen this before. To prevent and issues, I also put some marine goop to insure a water tight seal at connection . This should give trouble free operation for more that a year of hard use. Ideally the life of your fish finder. Easily achievable if you do like me, and replace your unit every 6 months. :D.

[TJones]

Battery in water tight container is for my hobie tank and is s 12 amp Lipo. This battery will run all day.

[TJones]

Standard

[TJones]

If wires

[TJones]

For bait tank

[TJones]

For fish finder . Keep in mind I'm running 7" screen that draws close to 1 amp per hour approximately. I'm using Lipo battery to reduce weight instead of carrying 10 lb battery. This battery is water resistant and has solid connectors. This battery is designed for race bike applications.

[TJones]

This pic belongs in fish report section

[TJones]

At least one or two pics are straight . Smh . How do I fix that ?

[King Saba]

Bingo home made bait rod

How has this been working for you? Does the tent pole cause line abrasion.

[kayachapi]

Scraped off the old paint, foil tape, repainted, then resin.

[Wyota]

Looking at all the ideas for battery boxes for fishfinders, I decided to build my own. I started with the math to figure out what size battery I needed for the time I needed on a fishfinder. I then looked at other accessories I might want to add. Livewell pump added more amperage need. Stern light for night ops added even more. bow lights If I so desired added even more. And finally, since I hoop net off the yak, those lights would require even more.

I started thinking of other accessories that could be added, and decided some sort of power distribution box and switches were called for. In order to be able to have any length of time with any heavy power accessories, I knew I might need a sizeable battery. The battery I settled on was a Duracell 14F2 14Ah AGM battery. Too big for any of the little Walmart boxes I see on here, and I didn't want to spend the money for a Pelican box just to cut holes in it.

I originally thought about putting the battery below decks (through the very small hatches mine has), and running switches through the skin of the yak. However, I didn't want to cut into the yak, and as we have 2 of these kayaks, it would be nice to be able to interchange my kit.

So, short story now long, a $5 Walmart Plano ammo box (has o ring lid), some switches, waterproof connectors, and a bus bar from Amazon, and now I have a portable power distribution box with switches that I can run up to 5 12v accessories off of, provided I put the correct plug on the end of the wires. I could even mount the FF to the top of it, but I probably won't as the box can be portable 12v power for a wide variety of things (I could even go to an outdoor party and run music, lights, and other things off the contraption.

Shown setting in Kayak well for size sake. When I actually take it out, it will be strapped down.

[FullFlavorPike]

*slow clap* Kudos to you, sir. That battery box is so awesome, and so doomed to corrosive failure ;)

My rig uses a single voltage divider to split a 12v battery into 6v for the bait tank and 12v for the fish finder. Long story short, even that's too much wiring and I bought a 6v battery so I can rewire the whole system in a simpler fashion.

Unless you goop over all those switches that thing is going to short out in like one trip. Those ammo boxes aren't really that waterproof, either. I don;t mean to be a total hater, because that's an elegant and beautiful rig you built, but it's going to be a pain in your butthole.

[Wyota]

Thanks for the tips, I'll make some refinements and see if I can negate some of that, as I really don't want to be running 5 batteries for 5 systems, and I like a challenge!

I've got a few ideas to shore up the boxes rubber seal from my diving kit (bigger O-rings and silicone keeps water out of some of my stuff at 120 foot depth, I think it can handle the surf) and some sort of "over" rubber around the lid such as an innertube or something.

The switches will be the weak link. I had gooped where the switches went in, and they have the rubber seals and covers, but I'll add extra goop to help out and see if I can shore it up a bit.

I'll update after I have corrected and taken it out this weekend, as well as a couple weeks after that to see how she is holding up at that point.

[Wyota]

Well, based on your advice, I gooped the poop out of the switches (not so pretty now), and I decided to use a liberal amount of dielectric grease on the box seal. Took it out, and while it didn't get a full dunking, it got pretty wet. Appears to be no moisture whatsoever inside the box. Gotta give it a few more days to check for any moisture or corrosion, but appearts to be holding up pretty well. After use, have decided to mount the ff to the top of the box (assuming it passes the longer term corrosion test).

Goop is great!!!!!

Update: 16 days later and nary a bit of moisture or corrosion. I'll keep inspection, grease and regoop as needed as a critical pre op check and it should be fine. Now to build out the light rig.

[Modigity]

Made a bait tank out of a Marine Cooler and copied the workings of the hobie bait tank using the scuppers for water intake and drain. I chose this cooler since it fits snug in the back of the Pro Angler and already had knotches I can put the bungie cords. I also rigged a stadium seat to the back and works perfect for passengers.

[Wyota]

Made a bait tank out of a Marine Cooler and copied the workings of the hobie bait tank using the scuppers for water intake and drain. I chose this cooler since it fits snug in the back of the Pro Angler and already had knotches I can put the bungie cords. I also rigged a stadium seat to the back and works perfect for passengers.

Nice setup, I'll be pinching some of your ideas as I look to build one for myself.

Quick noob questions:

The black bulb inline to the inlet pipes. Is that so you can manually add water should the bilge pump not have power?

The pipe over the top/side: does that have holes in the underside for the water to flow in?

[YakDout]

Nice setup, I'll be pinching some of your ideas as I look to build one for myself.

Quick noob questions:

The black bulb inline to the inlet pipes. Is that so you can manually add water should the bilge pump not have power?

The pipe over the top/side: does that have holes in the underside for the water to flow in?



Its to prime the tank, instead of having to use forward propulsion to push water up the inlet under the scupper.

[Modigity]

Its to prime the tank, instead of having to use forward propulsion to push water up the inlet under the scupper.

Yes, its a primer so I can turn it on when im stationary.

[cabojohn]

Making gafs for a couple friends...I use my broken composite /carbon fiber ice hockey sticks and they work awesome!! Grips are fantastic.
Nothing fancy just solid, light & functional... :)
Some pics-

[NICKWORN]

Making gafs for friends...I use my broken composite ice hockey sticks and they work awesome!! Grips are fantastic.
Nothing fancy just solid, light & functional. :)
Some pics-


??

[InfidelYak]

So I got off a little early and decided to follow the link that was posted for the DIY kayak cart. It came out perfect! Simple easy to follow instructions and the final price was around 60$ I couldn't be happier.

Heres the link in case you missed it

http://palmettokayakfishing.blogspot.com/2011/04/congaree-striper-fishing-report-4152011.html?m=1

[DanaPT]

??


I have a sherwood gaf (made from real wood) that does float. My guess on the graphite is that they will fill with water and sink.

[Mr. NiceGuy]

Grips are fantastic.
Nothing fancy just solid, light & functional... :)
Some pics-

What did you use to make the white grips?

[cabojohn]

What did you use to make the white grips?
^
I didn't make them...purchased from Hockey Giant / Hockey Monkey.
They sell them for about $7. They are pre made. Glue on w/ hot water.
Different colors, sizes & lengths.
I'm sure you could use them on any gaff / shaft.
:cheers1:

[cabojohn]

I have a sherwood gaf (made from real wood) that does float. My guess on the graphite is that they will fill with water and sink.
NOPE-
I now fill the composite shafts with expanding foam...they float. :)

[Deamon]

Hey John!

Where's the blue one???

Never mind...I got that one!!! Hahahahaha!!!

Jim

[Iceman]

Cabo dropped off 2 of these custom Slap Shot Gaffs for the Mission Bay Classic Raffle. :luxhello:

[Batmann]

^
I didn't make them...purchased from Hockey Giant / Hockey Monkey.
They sell them for about $7. They are pre made. Glue on w/ hot water.
Different colors, sizes & lengths.
I'm sure you could use them on any gaff / shaft.
:cheers1:
I use regular friction tape to make my grips like the guy in this video. The types of grips are great on a lot of different things.

https://youtu.be/j_mCK7WEOuk


Sent from my FRD-L04 using Tapatalk

[kirkdavis]

https://uploads.tapatalk-cdn.com/20170228/6083e13ca6eb6b54b249e02fd0df2623.jpgPicked up an older Hobie Mirage for a extra yak when relatives or friends are visiting so I needed something more than sawhorses. Got my basic idea from online, but made one thing different from any I saw. I put the plywood under the bottom frame which gives me more storage and prevents things from falling out. $150 for all the material fro HD and about 3-4 hours labor.


Sent from my iPhone using Tapatalk

[BigTunaL]

Made a bait tank out of a Marine Cooler and copied the workings of the hobie bait tank using the scuppers for water intake and drain. I chose this cooler since it fits snug in the back of the Pro Angler and already had knotches I can put the bungie cords. I also rigged a stadium seat to the back and works perfect for passengers.

Hello Modigity, I am going to duplicate your design :you_rock:
how did you fasten the pvc pipe inside the cooler that shoots water out? where did you get the priming pump? did you put a mesh/strainer at the end of the intake pvc pipe? what about check valves? did you use any?

Thank you

[NICKWORN]

So I got this idea from a local kayaker here in SD.. Dylan Pierce. It's a conduit and a few pvc fittings. Using my Hook 5 Transducer in the duct seal application seemed to be hampering my readings. So I gave this a try.

Took the conduit and some pvc fittings to make this water tight floating transducer mount. My transducer fit snug on the inside and now sets in water without the interference of anything except the actually hull itself. Going to be trialing it this weekend but when testing in garage I was actually able to here the transducers ping as I couldn't before when placed in a pancake of duct seal
I also placed the transducer right under my center hatch for easy access if somehow the water would need to be refilled.

I can't seem to think why this wouldn't be the best option beside having a newer hobie with the prefab transducer mount.

All in all $15, marine goop and conduit being the bulk of the price.

P.S. I used marine goop on the bottom edge to seal and then the left over duct seal I pulled from old application to reinforce the conduit to the yak for those bumpy road trips and swells.


Thoughts?

[dsafety]

That is a very elegant solution for a water mount. In my experience, the seal to the hull eventually fails and the water leaks out. Your design may not have that problem because you have attached the housing to a spot that does not appear to have much flex or curvature.

Should the seal ever fail, you might consider replacing the water with marine grease. It transmits the signal as well as water and will not leak out even if the kayak is stored upside down for months at a time.

[jruiz]

So I got this idea from a local kayaker here in SD.. Dylan Pierce. It's a conduit and a few pvc fittings. Using my Hook 5 Transducer in the duct seal application seemed to be hampering my readings. So I gave this a try.

Took the conduit and some pvc fittings to make this water tight floating transducer mount. My transducer fit snug on the inside and now sets in water without the interference of anything except the actually hull itself. Going to be trialing it this weekend but when testing in garage I was actually able to here the transducers ping as I couldn't before when placed in a pancake of duct seal
I also placed the transducer right under my center hatch for easy access if somehow the water would need to be refilled.

I can't seem to think why this wouldn't be the best option beside having a newer hobie with the prefab transducer mount.

All in all $15, marine goop and conduit being the bulk of the price.

P.S. I used marine goop on the bottom edge to seal and then the left over duct seal I pulled from old application to reinforce the conduit to the yak for those bumpy road trips and swells.


Thoughts?

So before you had hull, duct seal, then transducer. Now you have hull, duct seal, conduit, some water, then transducer. I'm having a hard time convincing myself that it's better. I think the next best thing to a transducer ready setup is a transducer mounted to the hull with a container around the transducer that you fill with water. What material is that conduit? Looks like painted/epoxied steel.

[NICKWORN]

So before you had hull, duct seal, then transducer. Now you have hull, duct seal, conduit, some water, then transducer. I'm having a hard time convincing myself that it's better. I think the next best thing to a transducer ready setup is a transducer mounted to the hull with a container around the transducer that you fill with water. What material is that conduit? Looks like painted/epoxied steel.

The conduit is plastic, not sure what kind, but the marine goop is only on the bottom edge of the conduit( which has the bottom taken off ), and the duct seal is only used in the edges of the outside so there is nothing interfering with the pinging of the transducer besides the plastic hull of the kayak! Not sure what you are talking about maybe u missed understood my description.

[jruiz]

The conduit is plastic, not sure what kind, but the marine goop is only on the bottom edge of the conduit( which has the bottom taken off ), and the duct seal is only used in the edges of the outside so there is nothing interfering with the pinging of the transducer besides the plastic hull of the kayak! Not sure what you are talking about maybe u missed understood my description.

I see, I mistakenly assumed that the transducer was fully enclosed in the conduit.

[NICKWORN]

I see, I mistakenly assumed that the transducer was fully enclosed in the conduit.

Yea I thought so. :cheers1:

[NICKWORN]

I saw this on Hobie Outback FB page and had to have it. It's the tackle storage for the square hatch, but older model outbacks don't have deck space for this upgrade. So instead of storing everything in a tackle bag in your front hatch... boom easy access!

I used a rod holder bungee from Walmart to strap the tackle boxes down in case I role in the surf.

[Hunters Pa]

I saw this on Hobie Outback FB page and had to have it. It's the tackle storage for the square hatch, but older model outbacks don't have deck space for this upgrade. So instead of storing everything in a tackle bag in your front hatch... boom easy access!

I used a rod holder bungee from Walmart to strap the tackle boxes down in case I role in the surf.

Not a bad idea, but doesn't that limit how far forward you can push the pedals, especially if you need to bring the fins flush with the bottom of the yak?

[goldenglory18]

Cool idea. Do you have a link to the plastic holder?

[kirkdavis]

I can't pry my wallet open to buy a game bag so have been thinking of alternatives. I plan on making one out of the insulating bubble wrap, the kind with the aluminum foil coating. A 2' x 25' roll is only $17 on Amazon. That and a little duct tape will make at least 3 bags, and I figure they could be used at least a few times each before they fall apart. At the rate I catch big fish I should be able to give two bags to my kids in my will.

[FullFlavorPike]

I can't pry my wallet open to buy a game bag so have been thinking of alternatives. I plan on making one out of the insulating bubble wrap, the kind with the aluminum foil coating. A 2' x 25' roll is only $17 on Amazon. That and a little duct tape will make at least 3 bags, and I figure they could be used at least a few times each before they fall apart. At the rate I catch big fish I should be able to give two bags to my kids in my will.



I also have thought about making one. I feel like you could sew a nice pouch out of an old wetsuit by doubling up the layers of neoprene. Would get HELLA stinky though.

[NICKWORN]

Not a bad idea, but doesn't that limit how far forward you can push the pedals, especially if you need to bring the fins flush with the bottom of the yak?

On setting 6 or less ur fine, so if your tall the. Yea it would!

[NICKWORN]

Cool idea. Do you have a link to the plastic holder?

Just google it, I'm sure Andy has some as well.

[Mr. NiceGuy]

I saw the plastic racks for holding Plano tackle boxes at Fastlane on Sunday.

Here they are on Amazon:

https://www.amazon.com/Hobie-Tackle-Management-System-Rectangular/dp/B00CP23ZH6/ref=sr_1_fkmr0_1?ie=UTF8&qid=1498536330&sr=8-1-fkmr0&keywords=hobie+tackle+management+rack

I'm tempted to replace my round hatch with a rectangular hatch, but the hatch kit replacement is about $115 and the rectangular bucket to drop inside is another $26 or so.

Rectangular hatch:
https://www.amazon.com/Hobie-RECTANGULAR-HATCH-ASSY-BLACK/dp/B0090YWS7K/ref=sr_1_1?ie=UTF8&qid=1498536538&sr=8-1&keywords=hobie+rectangular+hatch

Rectangular drop-in bucket:
http://www.austinkayak.com/products/12538/Hobie-Rectangular-Hatch-Drop-In-Bucket.html?utm_source=google&utm_medium=cpc&utm_campaign=Shopping:%20ACK%20PLA&adpos=1o1&scid=scplp12538_1591_1&sc_intid=12538_1591_1

$140 is kind of steep for 50% more space than my round hatch bucket, but it would help, and the shape is more useful for things like pliars

[filippo]

This idea hit me after been hooked by a Rapala lure/hook (not fun) and hearing about my buddy's having a Sabiki hook up his butt the week prior. So here it is!

No more Sabiki hooks flying around with the Sabiki Sleeve. "Installation" took 10 seconds. That is cutting the pool noodle with a knife. When you're done with your Sabiki, just wrap it around the pool noodle making sure each hook is secured into the foam, and store it in this container. It also fits a sinker weight and small iron jig if anyone's using one at the Sabiki's end (I do, as it goes down faster and the iron jig flashes catching bait's attention). Close the lid and you're ready to go. The rubber ends are flexible, so if you wish, you can add a small ball bungee cord on the bottom's end and secure your Sabiki Sleeve anywhere you like while launching/landing.

Total cost: $6.

$5 for the plastic holder (found at any local Home Depot stores; NOT found on their website for some odd reasons). Called "Viewtainer Slit Top Storage Container 2.75"X5".

And $1 for the pool noodle (Walmart). Look outside in the garden section.

http://i.imgur.com/ClSVePB.jpg

http://i.imgur.com/zHFcMCK.jpg

http://i.imgur.com/YUI8V9h.jpg

http://i.imgur.com/hEkdABv.jpg

[Mr. NiceGuy]

I like it Filippo. I've tried wrapping my sabiki around several different things, but nothing as neat at that. Thanks!

BTW, I use a small blue & white iron as the weight at the end of my sabiki, and I've caught several fish on the iron, so it does more than attract attention. I caught a jack smelt, corvina, bonito and several mackerals.

The hole in the noodle is perfect for that.

I'll take two!

[dsafety]

Simply brilliant! Where do you get your industrial strength sabiki flies?

Bob

[filippo]

Thanks guys!

Mr. NiceGuy - I believe you. Once a mac ate my sinker weight and it passed through his gills. It was pretty funny. I guess we really don't need hooks. Anything shining works.

Bob - I buy the Mustad Sabiki Bait Rig, SBM-30, from Walmart. Used the same rig about 5 times and still going strong.

http://i.imgur.com/5oOiTIT.jpg

[JayDee]

Made a bait tank out of a Marine Cooler and copied the workings of the hobie bait tank using the scuppers for water intake and drain. I chose this cooler since it fits snug in the back of the Pro Angler and already had knotches I can put the bungie cords. I also rigged a stadium seat to the back and works perfect for passengers.


Where did you get your stadium seat? mind sharing the link to buy and any tip on installing it? Picking up my new PA14 here shortly and would love to take my daughter out in the bay with me.

Thanks!

[Mr. NiceGuy]

Where did you get your stadium seat? mind sharing the link to buy and any tip on installing it? Picking up my new PA14 here shortly and would love to take my daughter out in the bay with me.

Thanks!

Costco has offered nice quality stadium seats for the past couple of years for around $14. What you do with it depends on your own creativity and mechanical skills.

[PescadorPete]

http://i.imgur.com/hEkdABv.jpg[/QUOTE]


Nice idea!

A little piece of hypalon will also work and takes up less space.

http://www.bigwatersedge.com/bwegallery/data/500/sabiki_holder.jpg http://http://www.bigwatersedge.com/bwegallery/data/500/sabiki_holder.jpg

[jrip]

Anyone picking up tar on the boats?
I use Goof off spray and it literally melts off.
Re: sabiki thread ; I just found the noodles very helpful.


Sent from my LG-TP260 using Tapatalk

[KayakDoctor]

Hey Dgax65. I'm new to this forum. Had to say how nice your wiring is. Clean and waterproof. Looks like you are using heat shrinked butt connectors too. Nicely done.

[PapaDave]

Good idea, gonna make a couple this week.