|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
|
Thread Tools | Display Modes |
03-23-2011, 09:48 AM | #1 |
Currently @ MLO Territory
Join Date: Dec 2010
Location: Under the Shadow
Posts: 2,290
|
Reel Maintenance?
My questions are: What is the proper method of cleaning the reels after each use? How often should I be opening the reels and cleaning them out? |
03-23-2011, 09:55 AM | #2 | |
Senior Member
Join Date: Nov 2010
Location: IE
Posts: 171
|
Quote:
i think alan tani's website is very thorough when it comes how to maintain a reel. http://alantani.com/ |
|
03-23-2011, 10:00 AM | #3 |
Senior Member
Join Date: Mar 2006
Location: La Jolla Shores
Posts: 1,626
|
Interesting... would like to know the outcome of the soaking overnite method. Never heard of this method before.
|
03-23-2011, 10:03 AM | #4 |
Senior Member
Join Date: Jan 2011
Location: San Juan Capistrano, Ca
Posts: 518
|
ya same here...from what i remember always being told over the years by multiple diff people is to rinse them after each use with freshwater but to not soak them to heavily. ive always just done a light spray with a hose and quick wipe down with a dry towel.
|
03-23-2011, 10:19 AM | #5 |
Currently @ MLO Territory
Join Date: Dec 2010
Location: Under the Shadow
Posts: 2,290
|
Well, if i just rinse them out with the hose the next time i take the reels out you can feel the salt in the reel. (barely)
When i soak my reels overnight the next time i take them out i don't feel the salt. it is smooth What i do: i leave the reels attached to the rod and fill the bucket all the way to the top and put the reels face down in the water (the rods are perpendicular to the bucket), the next morning i just leave them out to dry. |
03-23-2011, 10:34 AM | #6 | |
Team Keine Zugehörigkeit
Join Date: Nov 2010
Location: Way out there
Posts: 2,854
|
Quote:
not too sure on the over nighter in a bucket, might be a good idea to open them up and check the bearings and the drags.
__________________
Não alimente os trolls------------Don't feed the trolls---------------インタネット荒らしを無視しろ |
|
03-23-2011, 10:37 AM | #7 |
Senior Member
Join Date: Jun 2009
Posts: 186
|
been doing this for years.
button down drags. immerse in warm soapy water for about 1/2 hour. drain. rinse well with fresh water. drip dry upside down over a towel. after, loosen drags all the way, put in free spool, tighten spool tensioner, apply clicker if it has it. now, I grease all my drags but wither way, most drag material (by now at least) is not absorbing. there's reel cleaning and reel maintenance. that's cleaning. maintenance would be taking it apart, lubing, etc. on star drags it's really easy even a guy like me could do it. |
03-23-2011, 10:41 AM | #8 |
Senior Member
Join Date: Feb 2011
Location: Corona, CA
Posts: 472
|
I spray my rods and reels down, then scrub everything...guides and all...with one of these
Then blow everything dry with this then spray light coating of this on everything Never have had any problems with salt corrosion |
03-23-2011, 10:47 AM | #9 |
Senior Member
Join Date: Jun 2010
Location: Alhambra
Posts: 506
|
i have been soaking my reels since i was a kid. my granddad lived at the ocean in washington state. we would go surf fishing a lot and each time we would soak the reels to get them clean. while his cars, travel trailer would rust i never saw any corrison with the reels. these were the old garcias and diawa spinning reels.
i still use the diawa reel that he had. had it serviced recently and it is just fine. the exterior condition on the reel is great too. some have said not to do this and others say it doesn't matter. so to each his own. i also spray wd40 on the outside of the reels and wipe off the excess. i think the wd40 helps keep the salt water off the reels while i use them and keep them looking new. i personally have not had any issues with my equipment while doing this, my .02 |
03-23-2011, 10:52 AM | #10 | |
Currently @ MLO Territory
Join Date: Dec 2010
Location: Under the Shadow
Posts: 2,290
|
Quote:
How long do you soak them in water for? or by soak do you mean rinse? |
|
03-23-2011, 11:24 AM | #11 |
Senior Member
Join Date: Jan 2011
Posts: 143
|
A local guide told me to spary my reels with windex cus it drys quick unlike water. I then wipe it down with a rag with a lil wd-40 on it. Seems to work well so far.
|
03-23-2011, 12:23 PM | #12 |
Senior Member
Join Date: Mar 2005
Location: san diego
Posts: 158
|
If you want your reels to work at their peak preformance for as long as possible keep water out of them. I tighten the drag and rinse with a light spray, just enough to cut the salt film and then a wipe down to dry. After the reel has dried for a day losen the drag and turn the handle and make sure its smooth. I check the free spooling next. I store reels with star drags in gear with the drags backed off and reels with lever drags in free spool with the clicker on.
Kayaking is very hard on reels.There is nothing worse than sandy foamy water getting in your reels while launching through the surf. I put small sandwich bags over mine and use a rubberband to keep them on. Keeping water out really helps. |
03-23-2011, 12:56 PM | #13 | |
Senior Member
Join Date: Jun 2010
Location: Alhambra
Posts: 506
|
Quote:
i stand them up so that the rest of the water drips out and i also loosen the drag. |
|
03-23-2011, 03:34 PM | #14 |
Member
Join Date: Jan 2011
Location: San Diego, CA
Posts: 71
|
No garden hose at my place so I bring my rods and reels in the shower with me when I get home. I spray down the reels and all my rod guides then put them outside the shower to dry over a towel. Once they dry I'll oil them up before storing. Every couple of months I'll take them apart for cleaning and grease.
|
|
|