Transducer Grease Mount

[Kailolo]

Type of Grease for Transducer Grease Mount

---

In additon to Humminbird's video for installation of their Kayk Kir using a grease mount you can go to http://www.yakhawaii.com/index.php?o...ging&Itemid=62 for another video.

But for DIY, according to that link, H-bird support stated that "marine grease" or "axle grease" could be used. Has to resist heat (and preferably is not stinky!). The viscosity of the grease will help hold the transducer in place as will a very snug foam cutout, if you DIY.

I plan to make my own holder as soon as I recieve my new H-bird FF.

Maybe someone can post a "brand" of grease that has worked well.

I was told by H-bird that the only difference between a transom mount transducer and an in-hull mount transducer when mounted in-hull is that the transom mount tranducer may not read temperatures well. Maybe that is because of the location of the temp sensor inside the puck is different than inside the transom mount transducer?