It was good but..it wasn't worth it!

[alanw]

Originally Posted by EastLosYaker

For anyone in need of a "bilge pump", I got mine at the 99cent store. It is really a kids toy water gun to be used in a swimming pool. I actually needed to use it about a month ago while fishing under the Coronado bridge when the leak in my yak became apparent. I worked like a champ and on top of that, it floats! Thanks to Andy for patching me back up. Great story for us to read. Glad everything turned out OK.

Yea bad idea. Kids toys do not make suitable safety gear. Sure I will buy a slightly less expensive radio to save some money, or buy the $80 PFD instead of the $150 one, but I'm not trusting a super soaker with my life.

[ful-rac]

Originally Posted by alanw

Yea bad idea. Kids toys do not make suitable safety gear. Sure I will buy a slightly less expensive radio to save some money, or buy the $80 PFD instead of the $150 one, but I'm not trusting a super soaker with my life.

Yeah eastlosyaker has touted his .99¢ "bilge pump" squirt gun before several times.

ELYER, just buy a regular bilge pump, they're not too expensive. You may not think its necessary right now, being relatively new to the kayak game and all...i wouldn't want to see you learn the hard way...

With all due respect i think its irresponsible to tell people to buy a squirtgun for a bilge pump.

So you say mine sank and yours floats...then buy a floating one. My sinking west marine bilge pump could out pump your squirtgun easily.

[alanw]

Hey Tony I had an idea, wouldn't help you if you lost your pump, but... mount a through-hull fitting somewhere topside of your yak. The fitting has a hose attached to the bottom that reaches a low point inside the yak. The top of the fitting has a cap which is removed to attach a short hose to your bilge when you need it... now you can pump water out without opening any hatches. What do ya think?

[roadx]

Originally Posted by alanw

Hey Tony I had an idea, wouldn't help you if you lost your pump, but... mount a through-hull fitting somewhere topside of your yak. The fitting has a hose attached to the bottom that reaches a low point inside the yak. The top of the fitting has a cap which is removed to attach a short hose to your bilge when you need it... now you can pump water out without opening any hatches. What do ya think?

That's a pretty good idea! I just frick'n hate to drill holes in the haul.
*edited... After thinking about it, one could use the holes for the sonar wire pass through. No extra holes

[FISH11]

As Tony said don't get a toy water squirt gun to try and save your life. Walmart sells a Atwood hand bilge pump for $19.99. I bought a West Marine one that has a foam collar that makes it float for $20. Is your life worth less than $20. Think about it.

[ful-rac]

If I'm gonna go that far as to drill a hole...I just might as well install a electric bilge pump like the one I had on my stealth.

I don't think it's necessary...you just have to be more careful and not underestimate the conditions....and not over estimate you & your kayaks abilities..

[wiredantz]

Originally Posted by ful-rac

If I'm gonna go that far as to drill a hole...I just might as well install a electric bilge pump like the one I had on my stealth.

I don't think it's necessary...you just have to be more careful and not underestimate the conditions....and not over estimate you & your kayaks abilities..

I think, I might install an electric bilge pump. Tony's foresight on installing an electric bilge pump on his old kayak saved his life one time too.

[momo fish]

You should, you barely have anything on your kayak anyhow 😁

Originally Posted by wiredantz

I think, I might install an electric bilge pump. Tony's foresight on installing an electric bilge pump on his old kayak saved his life one time too.