Truck inside camper shell rod carrier

[45user]

I heard the strap ones kinda sags
But at $20 I may try that one
Any others have used something else? Or pic of their diy system to give me some idea?
Thank you all for your help!

[MissileTM]

I use this under the deck top of my Pontoon boat and it works great:
http://www.amazon.com/Berkley-Twist-...ley+rod+holder

[45user]

Originally Posted by MissileTM

I use this under the deck top of my Pontoon boat and it works great:
http://www.amazon.com/Berkley-Twist-...ley+rod+holder

It needs holes drilled right?

[ZUMAN]

Originally Posted by 45user

It needs holes drilled right?

Liquid nails???
If you want it there forever!!!!

[45user]

Yeah but don't want to drill holes..

Anybody tried this?

http://www.rodmounts.com/rod-loft-pro/

Seems like it has mixed review and kinda expensive at $120-130

[mrJB]

Some considerations since I've tried several variations: Rods should be pretty secure, at least at one end, so they don't bounce around. I've tried bungie elastic and straps, but the bouncing and vibrations will wear on your rods wherever it is sitting, be it on the handle or the blank. Another consideration is that you should have a window that opens in your shell and also in the back of the truck if you use the longer rods (>7')

Here's what I came up with and it works great...

P6230007.jpg

P6230008.jpg

P6230011.jpg

P6230012.jpg

No permanent modifications were made to the shell or truck. For the rear attachment points, I used the existing bolts for the rear shell window. For the front supports, I used the appropriate sized dowels to fit the head restraint attachments. I never used the rear restraints since they restrict my vision. Any areas that contact the rod are covered with the soft part of a piece of velcro.

Hope this might help.

[StinkyMatt]

I had a very simple one in my old ford.

2x2 piece of wood cut to the width of the shell just above the window. You wedge it in place and the upper edge of the window holds it up.

I put a few screw in eye bolts into it and used small bungees to separate the rods.

Put one crossbar in front of shell, one towards the back.

Total cost 5 bucks.

No sag at all, very sturdy, removed in 10 seconds.

[45user]

Originally Posted by mrJB

Some considerations since I've tried several variations: Rods should be pretty secure, at least at one end, so they don't bounce around. I've tried bungie elastic and straps, but the bouncing and vibrations will wear on your rods wherever it is sitting, be it on the handle or the blank. Another consideration is that you should have a window that opens in your shell and also in the back of the truck if you use the longer rods (>7')

Here's what I came up with and it works great...

Attachment 12747

Attachment 12744

Attachment 12745

Attachment 12746

No permanent modifications were made to the shell or truck. For the rear attachment points, I used the existing bolts for the rear shell window. For the front supports, I used the appropriate sized dowels to fit the head restraint attachments. I never used the rear restraints since they restrict my vision. Any areas that contact the rod are covered with the soft part of a piece of velcro.

Hope this might help.

Thank you
That looks really nice!