06-23-2015, 04:09 PM | #1 |
gurmpy old one
Join Date: Apr 2007
Location: El Cajon
Posts: 80
|
livewell volume
in your livewell? Thanks for the help, Rich |
06-23-2015, 04:22 PM | #2 |
Senior Member
Join Date: Jul 2013
Location: Long Beach
Posts: 366
|
For a square: length x width x height.
For a cylinder: pi*r squred* height. That should get you a good estimate of volume. |
06-23-2015, 05:19 PM | #3 |
Brandon
Join Date: Jul 2011
Location: San Diego
Posts: 2,345
|
I would get a one gallon bucket and fill it til you see what you have. One gallon of water weighs 8.3 lbs. give or take a little being salt water.
|
06-23-2015, 05:52 PM | #4 |
gurmpy old one
Join Date: Apr 2007
Location: El Cajon
Posts: 80
|
I've seen a formula before that was length X width X height
and then something converts the cubic dimensions to gallons. |
06-23-2015, 06:43 PM | #5 |
Senior Member
Join Date: Jul 2013
Location: Long Beach
Posts: 366
|
Measurements in inches (Length x Width x Height) x 0.004329004329004
1 inch cube = 0.004329004329004 gallon. Or after you have your measurements you can plug it here: http://www.unit-conversion.info/volume.html Just make sure you have are using the correct unit of measure. Sorta relevant : http://youtu.be/BVtQNK_ZUJg Logic behind the math: http://youtu.be/KfNRArPXCjw |
06-23-2015, 07:06 PM | #6 |
Senior Member
Join Date: Apr 2010
Posts: 6,856
|
One of the things that I recall from a Six Sigma course that I attended was a problem solving skill, its called the 5 Why's
So, I'll ask 1. Why? 2. Why? 3. Why? 4. Why? 5. Why? Once you answer these everyone will know why you're asking this question.
__________________
www.facebook.com/Teamsewer |
06-23-2015, 07:15 PM | #7 |
Senior Member
Join Date: Jun 2011
Location: Too far from the launch.
Posts: 443
|
Blue waffle has a good online calculator for live well assembly.
__________________
|
06-23-2015, 07:23 PM | #8 | |
Senior Member
Join Date: Apr 2010
Posts: 6,856
|
Quote:
__________________
www.facebook.com/Teamsewer |
|
06-23-2015, 09:11 PM | #9 |
gurmpy old one
Join Date: Apr 2007
Location: El Cajon
Posts: 80
|
The answer to the question of WHY is
I'm building a new livewell. The water area is 18 inch by 14 inch by 9 inch. I wanted to know how many gallons of water this will hold. |
06-23-2015, 09:25 PM | #10 |
Member
Join Date: Aug 2013
Location: Pine Valley when not fishing La Jolla
Posts: 2,641
|
This is the perfect size and keeps the center of gravity lower. I built one like this, but put an outlet hose in case I ever want to use it in a small row or rental boat, instead of the holes on the side. If you have a PA and you sit higher than use the next size up container. It is a lot better because it doesn't have to hold as much water as the bucket one I used before and it is all self contained with a 6v battery. I have had 15 macs in there and they do better than in the bucket tank. http://www.kayakfishingsupplies.com/...it-tank-system
__________________
MARK ......... 2016 MALIBU X FACTOR, 2020 SOLO SKIFF (Fishing Kayak on Steroids ) |
06-23-2015, 09:44 PM | #11 |
Senior Member
Join Date: Jul 2013
Location: Long Beach
Posts: 366
|
|
06-23-2015, 09:47 PM | #12 |
Member
Join Date: Sep 2013
Location: OC
Posts: 62
|
9.82 Gallons US ?
http://www.calculatorsoup.com/calcul...ction/tank.php I am an idiot so if is built, I just use a gal. jug and fill it up, keeping count of the gallons. Hope it helps. Stephen |
06-24-2015, 09:52 AM | #13 |
Senior Member
Join Date: Mar 2010
Location: San Diego
Posts: 2,385
|
You're making me do math, please stop.
__________________
No better time than being on the water, God Bless, JimmyZ |
|
|