Thoughts On Kayak Stand - Kayak Fishing Adventures on Big Water’s Edge

Mr. NiceGuy · 07-22-2015, 12:20 PM

Clever idea.

Hobie warns us not to store our boats on the wheels to avoid distortion of the hull. I don't know how susceptible the hulls really are to disfiguration from storage.

I store mine on the wheels, with the bow up on a small utility stool. I haven't noticed any distortion yet. The Hobie cart seems to fit in a strong part of the hull, the two pipes have donut pads where they rest on the scuppers, and there's a padded cross-member that distributes the load as well.

Maybe if it gets hot (under a darker color non-reflective tarp? in a hot utility shed? the back of a hot van?) the risk of problems compounds with heat?

I take chances with my own things, but because of Hobie's official warning I would suggest proceeding with caution.

B100 · 07-22-2015, 12:43 PM

Thanks for the feedback guys. I was about to buy it but after looking at the dimensions I noticed these things are TINY! I'm going to have to scour the web for ones that are a bit bigger..

GR6RR · 07-22-2015, 12:53 PM

Some use the ones from harbor freight. Some bend though, use at your risk.

B100 · 07-22-2015, 01:04 PM

Quote:

Originally Posted by GR6RR

Some use the ones from harbor freight. Some bend though, use at your risk.

Lol, I didnt' even see this post.

B100 · 07-22-2015, 12:54 PM

Here's the ticket:

http://www.harborfreight.com/200-lb-...and-38778.html

One of the reviewers says he uses for his kayak.

The only down side is that it's zinc plated steel. Water will inevitably get on it so I'll probably spray paint a few layers of rustoleum paint on top to mitigate the rusting.

I'll let you guys know how it works out!

Mr. NiceGuy · 07-22-2015, 02:17 PM

Quote:

Originally Posted by B100

Here's the ticket:

http://www.harborfreight.com/200-lb-...and-38778.html

Looks like a good shape to make sturdier out of scrap lumber.

Two "X's" and two cross bars

sharjak · 07-22-2015, 02:22 PM

I just use a pair of Home Depot saw horses. I store my revo upside down and turn it over when I need to work on it.

07-22-2015, 12:20 PM	#1
Mr. NiceGuy Manic for Life Join Date: May 2015 Location: San Diego Posts: 839	Clever idea. Hobie warns us not to store our boats on the wheels to avoid distortion of the hull. I don't know how susceptible the hulls really are to disfiguration from storage. I store mine on the wheels, with the bow up on a small utility stool. I haven't noticed any distortion yet. The Hobie cart seems to fit in a strong part of the hull, the two pipes have donut pads where they rest on the scuppers, and there's a padded cross-member that distributes the load as well. Maybe if it gets hot (under a darker color non-reflective tarp? in a hot utility shed? the back of a hot van?) the risk of problems compounds with heat? I take chances with my own things, but because of Hobie's official warning I would suggest proceeding with caution. __________________ Another ho-hum day in Paradise Last edited by Mr. NiceGuy; 07-22-2015 at 12:28 PM.

07-22-2015, 12:53 PM	#3
GR6RR Lucky Fisher Join Date: Feb 2012 Location: too far inland Posts: 366	Some use the ones from harbor freight. Some bend though, use at your risk. __________________

07-22-2015, 12:43 PM	#2
B100 Junior Join Date: Jul 2015 Location: SoCal Posts: 17	Thanks for the feedback guys. I was about to buy it but after looking at the dimensions I noticed these things are TINY! I'm going to have to scour the web for ones that are a bit bigger..

07-22-2015, 12:54 PM	#5
B100 Junior Join Date: Jul 2015 Location: SoCal Posts: 17	Here's the ticket: http://www.harborfreight.com/200-lb-...and-38778.html One of the reviewers says he uses for his kayak. The only down side is that it's zinc plated steel. Water will inevitably get on it so I'll probably spray paint a few layers of rustoleum paint on top to mitigate the rusting. I'll let you guys know how it works out!

07-22-2015, 02:22 PM	#7
sharjak Senior Member Join Date: Nov 2011 Location: South OC Posts: 102	I just use a pair of Home Depot saw horses. I store my revo upside down and turn it over when I need to work on it.