Ff setup - Kayak Fishing Adventures on Big Water’s Edge

PescadorPete · 09-29-2015, 07:33 AM

I've had three different mounts. First was Goop. When that finally popped off, I built a wet well. That worked better than the Goop. When the wet well finally sprung a leak, I gave the duct putty a try. That worked the best of all. I mounted it in the old wet well to hold in place.

You can easily test it out with some putty and press it onto the hull. The stuff is easy to remove if you find it doesn't work for you.

I get good strong bottom echos over the canyon all the way down to 1000' which is the limit of my fish finder.

09-29-2015, 07:33 AM	#19
PescadorPete Senior Member Join Date: Mar 2005 Location: Leucadia, CA Posts: 261	I've had three different mounts. First was Goop. When that finally popped off, I built a wet well. That worked better than the Goop. When the wet well finally sprung a leak, I gave the duct putty a try. That worked the best of all. I mounted it in the old wet well to hold in place. You can easily test it out with some putty and press it onto the hull. The stuff is easy to remove if you find it doesn't work for you. I get good strong bottom echos over the canyon all the way down to 1000' which is the limit of my fish finder.