Share Your Innovations

[battleborn]

Originally Posted by Deez Knots!

Hey guys. I saw a guy with one of these but i couldn't find any DIY's so i decided to make one:

Need a place to store your irons?

What you need:
Bucket
Bucket Lid
Utility Knife
Dremel tool
Drill Bit
Drill (You can use dremel tool as well)
IRONS!

Cut the inner circle off and the outer lip off with the utility knife!


The outer lip wraps around the outside of the bucket (this is the part that has to go) and the inner lip stays inside the bucket (do not cut this off)


Smooth out lid with dremel


Slide lid down halfway and drill out holes


Now add your irons in and voila! You have a safe way of transporting and storing your irons. The lid sits tightly inside and does not require glue; you can remove the lid and use the bucket when needed.



I drilled my holes out with my dremel tool so it came out looking pretty rough; I also did not bother smoothing out the inner circle. If you want yours looking better than mine, use a drill for the holes and smooth out the inner circle with dremel

Awesome Jig buckets rule...been trying to find a commercial product now I can just DIY. Thanks for the post.