Truck Rack - Kayak Fishing Adventures on Big Water’s Edge

Grego · 07-07-2008, 08:14 PM

CJ, you don't happen to have a close up pic of the mounting brackets? I have a similar truck but have a soft tonneau that mounts to the inside of the bed leaving the top of the bed rails free. But I need to see if it will interfere with my tonneau mounts.

Grego

Siebler · 07-08-2008, 09:53 AM

Here ya go Grego. On 95.5-2000 Tacoma's the mounts are almost the exact width of the bed rail, just maybe 1/8" less wide.

Grego · 07-08-2008, 01:29 PM

I see, so I will need to drill a couple holes into the top of the bed rail. I'm going to peek around at some 95.5-2000 models. My yak truck is a 92 (pre-tacoma). I'll only need to mount the rear set because I have a thule over the roof. Right now I have the other mount coming out of my bumper hitch.

Siebler · 07-08-2008, 01:47 PM

yep 2 holes per mount.

Grego · 07-15-2008, 08:26 AM

I'll be out of town this coming weekend, but I'm interested in coming by for a fit test. I'll coordinate through PM's.

Siebler · 07-31-2008, 02:55 PM

Still Available. Had a few guys that sounded really interested but flaked.

Ill let it all go for 120.00 (with saddles). Its at my house (college area) right now but I am working at OEX Point Loma and Mission Bay tomorrow.

Grego · 07-31-2008, 04:34 PM

Sorry CJ, been busy after coming back, please do sell it if I'm slacking. It's a $65 roundtrip for me so I have to coordinate my travel down there wisely. I might be fishing LJ itomorrow, and if it will be at your shop, I'll swing by to take a look but I'll have a different truck with me.

07-08-2008, 09:53 AM	#2
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	Here ya go Grego. On 95.5-2000 Tacoma's the mounts are almost the exact width of the bed rail, just maybe 1/8" less wide. __________________ CJ Siebler

07-08-2008, 01:47 PM	#4
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	yep 2 holes per mount. __________________ CJ Siebler

07-31-2008, 02:55 PM	#6
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	Still Available. Had a few guys that sounded really interested but flaked. Ill let it all go for 120.00 (with saddles). Its at my house (college area) right now but I am working at OEX Point Loma and Mission Bay tomorrow. __________________ CJ Siebler

07-07-2008, 08:14 PM	#1
Grego Senior Member Join Date: Mar 2005 Posts: 446	CJ, you don't happen to have a close up pic of the mounting brackets? I have a similar truck but have a soft tonneau that mounts to the inside of the bed leaving the top of the bed rails free. But I need to see if it will interfere with my tonneau mounts. Grego

07-08-2008, 01:29 PM	#3
Grego Senior Member Join Date: Mar 2005 Posts: 446	I see, so I will need to drill a couple holes into the top of the bed rail. I'm going to peek around at some 95.5-2000 models. My yak truck is a 92 (pre-tacoma). I'll only need to mount the rear set because I have a thule over the roof. Right now I have the other mount coming out of my bumper hitch.

07-15-2008, 08:26 AM	#5
Grego Senior Member Join Date: Mar 2005 Posts: 446	I'll be out of town this coming weekend, but I'm interested in coming by for a fit test. I'll coordinate through PM's.

07-31-2008, 04:34 PM	#7
Grego Senior Member Join Date: Mar 2005 Posts: 446	Sorry CJ, been busy after coming back, please do sell it if I'm slacking. It's a $65 roundtrip for me so I have to coordinate my travel down there wisely. I might be fishing LJ itomorrow, and if it will be at your shop, I'll swing by to take a look but I'll have a different truck with me.