They said I was Insane, they said it was impossible - Kayak Fishing Adventures on Big Water’s Edge

wiredantz · 04-20-2017, 03:13 PM

the cart was original a folding canoe cart with a width extender and balloon tires, then i put the hobie 17t cradles on it.

It was too high, so i lowered the whole cart by cutting the aluminum legs about 6 inches and drilling new axle holes using a 1/2 drill bit and some water to cool down the metal as i drilled into it. Now its low enough so i can lower the hobie pa17t when i seesaw it back down from the hand launch. I use the hand launch as a seesaw and then tie the wheels right behind my seat.

04-20-2017, 03:13 PM	#9
wiredantz Currently @ MLO Territory Join Date: Dec 2010 Location: Under the Shadow Posts: 2,290	the cart was original a folding canoe cart with a width extender and balloon tires, then i put the hobie 17t cradles on it. It was too high, so i lowered the whole cart by cutting the aluminum legs about 6 inches and drilling new axle holes using a 1/2 drill bit and some water to cool down the metal as i drilled into it. Now its low enough so i can lower the hobie pa17t when i seesaw it back down from the hand launch. I use the hand launch as a seesaw and then tie the wheels right behind my seat. __________________ Team: Disbanded You only have one chance in this life...make the right decision(s)...so you don't regret it