Hobie Revolution,$1250 obo - Kayak Fishing Adventures on Big Water’s Edge

Billy V · 09-18-2008, 08:42 PM

It looks like the "click and go" mounting brackets could be installed into an earlier model year Hobie. Maybe Nate can tell us for sure.

I never had any problem with the cam screws or the mirage drive during the 2 years of use @ La Jolla. Everything is still Tip-Top.

I will have to take a closer look at the 09 this week, as for the New Mirage Drive sprockets and screw-in mast they can definitely be installed on most of the older mirage drives.

I have a set on order now.

thien · 09-20-2008, 12:06 PM

You can not install click n' go hardware on previous model year kayaks. The hull of the 09's were modified to be able to accept the click n go hardware. Hobie will be coming out with the new rudder up and down lines as a kit that you can retrofit on the older kayaks, but not for a while.

09-18-2008, 08:42 PM	#1
Billy V Senior Member Join Date: Sep 2006 Location: Bay Ho Posts: 1,382	It looks like the "click and go" mounting brackets could be installed into an earlier model year Hobie. Maybe Nate can tell us for sure. I never had any problem with the cam screws or the mirage drive during the 2 years of use @ La Jolla. Everything is still Tip-Top. I will have to take a closer look at the 09 this week, as for the New Mirage Drive sprockets and screw-in mast they can definitely be installed on most of the older mirage drives. I have a set on order now.

09-20-2008, 12:06 PM	#2
thien Member Join Date: Jun 2007 Posts: 53	You can not install click n' go hardware on previous model year kayaks. The hull of the 09's were modified to be able to accept the click n go hardware. Hobie will be coming out with the new rudder up and down lines as a kit that you can retrofit on the older kayaks, but not for a while.