Optimal Jig Stick Length On Kayak

[iethinker]

Originally Posted by SoCalEDC

quick update. Went rod shopping on Saturday, but Turners was closed. Ended up at Bass Pro Shop. Rod selection was pretty slim which surprised me. about a month ago I was there looking at gear and they had a ton of rods in stock. I found an Okuma mixed in with the Shimanos that caught my eye, after having the sales guy pull on the tips (hey now) of a few rods I decided to go with the Okuma Guide Select swim bait rod 7'-11" XH (15-40#, 2-10oz. lure). Its a little lighter than I had in mind but it felt great in hand, balance was nice, and the salesman mounted one of the display MXJ reels on it since thats what I am going to stack it with. Its a little more parabolic than I had in mind but that should help if I want to use it for big rockfish swim baits too I suppose. Over all I am pretty stoked.

My reel is brand new and its been sitting around waiting for a home for a while so I've yet to put any line on it. I plan to spool it with 65# jbraid (4 carrier) and 30-40# mono top shot (75-100 yds), likely berkley trilene because thats what I have spools of. An alberto with the 30 may pass through the guides just a little easier than the 40#, but the 40# is obvi gonna give me a little more juice.

I would love to hear any thoughts on 30# vs 40# for the top shot.

Like I said...big swimbait rod...you will be happy with the lighter format...good choice. You will cast further and more times without fatigue.
More flex is better for casting and fighting fish on treble hook equipped jigs....all though yours is rated fast-action...the longer length just gives it a longer flex section....will accommodate single hook swim jigs as well. I use 2x-rod-length leader of 20-lb, 25-lb or 30-lb trilene big game over 30, 40 or 50-lb 4-strand braid depending on mood, target fish or kelp or lure weight. Always FG-Knot. Go lighter and cast further with less effort. Go lighter with less leader to get jigs to the bottom (rock fish) and retain sensitivity. I challenge you to tie some fresh 30-lb braid to 2x-rod length of a 20-lb leader and then tie the leader to something solid. With full leader deployed, pull against it in your yard or wherever just to set your reference...can you acheive full compression? Don't break your new rod...seriously. Then decide what line you want on your reel. Max for me is 30/50...unbreakable, cuts kelp, etc...but are you regularly fishing la Jolla?

[SoCalEDC]

Originally Posted by tak100

For a jig stick I would personally go with the heavier line. If the jigs are working the fish usually aren't line shy.

If you are worried about your joiner knot going thru the guides use a short leader, 4-5' that always stays out of the guides. You will be surprised how long a 100 yard spool of leader will last you!

I now use this technique even for fly lining bait. If it makes a difference I really have not noticed. Bait selection and movement seem much more important.

Tight lines.

Thanks for the tips. I will keep that in mind.

Originally Posted by tyunk29

I bought the same rod last year and I like it a lot. We must have talked to the same salesman. When I went in there I wasn't even considering that rod but he turned me onto it and I don't regret the decision at all.

right on, this is reassuring. I am hoping to have time to spool it up and take it out this weekend.

Originally Posted by iethinker

Like I said...big swimbait rod...you will be happy with the lighter format...good choice. You will cast further and more times without fatigue.
More flex is better for casting and fighting fish on treble hook equipped jigs....all though yours is rated fast-action...the longer length just gives it a longer flex section....will accommodate single hook swim jigs as well. I use 2x-rod-length leader of 20-lb, 25-lb or 30-lb trilene big game over 30, 40 or 50-lb 4-strand braid depending on mood, target fish or kelp or lure weight. Always FG-Knot. Go lighter and cast further with less effort. Go lighter with less leader to get jigs to the bottom (rock fish) and retain sensitivity. I challenge you to tie some fresh 30-lb braid to 2x-rod length of a 20-lb leader and then tie the leader to something solid. With full leader deployed, pull against it in your yard or wherever just to set your reference...can you acheive full compression? Don't break your new rod...seriously. Then decide what line you want on your reel. Max for me is 30/50...unbreakable, cuts kelp, etc...but are you regularly fishing la Jolla?

Thanks for the information, and yea i think you nailed it in your first post. I like the idea of keeping the leader short (relatively,10-20') for sensativity I am just concerned about casting (mostly) straight braid. I will have to try it out and see how I like it. You bring up a good point tho, I wasn't considering the sensativity when using it for bottom fishing because right now I have set ups for that so it was going to be a secondary role for this rod, however, if i want to use this to fish deep swimbaits in a horizontal fashion now and again I could have an issue with a ton of mono on there.

[SoCalEDC]

Spooled it with the j braid x4 65# I had. It took 300 yards using my non professional spool method crank the spool down in an assembly with a bolt and some washers and create resistance, then turn drag up on the reel and reel it onto the reel and off of the spool. I topped it off with about 20' leader of 30# mono. I'm going to drop a big weight deep tomorrow and reel it back up to tighten it up the braid and see if I can make the room for a leader. I jammed the lever to full and tested pulling a decent amount of line off and didn't get any dig ins, that was a good sign. Fwiw I typically spool my reels like this and never have issues, I'm wondering if this braid is thicker than it claims. I will need to mic it at some point and find out.

[SoCalEDC]

Tested it on Saturday, it casts well and feels good. I might have to bite the bullet and just cast straight braid because I do feel the knot (alberto) pass through the guides as I cast, not a big fan of that and I'm sure its costing me distance despite being early in the cast with my 20' leader.

didn't get any big fish on the iron but a few mackerel in the bait I was targetting did take the jig and that felt good on the rod. I could very easily feel the bite and the rod was soft enough that I could feel the bite and get the hook set just by continuing to reel through but not so soft that it just folded over on itself.

[Dave Legacy]

Originally Posted by SoCalEDC

Tested it on Saturday, it casts well and feels good. I might have to bite the bullet and just cast straight braid because I do feel the knot (alberto) pass through the guides as I cast, not a big fan of that and I'm sure its costing me distance despite being early in the cast with my 20' leader.

didn't get any big fish on the iron but a few mackerel in the bait I was targetting did take the jig and that felt good on the rod. I could very easily feel the bite and the rod was soft enough that I could feel the bite and get the hook set just by continuing to reel through but not so soft that it just folded over on itself.

Don’t fret the knot passing through the guides - it’s really not a big deal.

[Oolie]

Sounds like an excellent set up.


I'd work on the knots though. PR if you can find a tool. It's tight.

[SoCalEDC]

Originally Posted by Dave Legacy

Don’t fret the knot passing through the guides - it’s really not a big deal.

Thanks. My biggest concern with the knot is that it decreases the distance but maybe an FG or PR would hel to reduce that, although the alberto is pretty slim.

Originally Posted by Oolie

Sounds like an excellent set up.


I'd work on the knots though. PR if you can find a tool. It's tight.

Thanks for the heads up, I will see about the pr knot tool. I have seen some videos but never considered it because it needed a tool, but sounds like it may be worth the hassle of having one extra item.