Quote:
Originally Posted by MITCHELL
With a more bent rod you would need shorter gaps between the guides to keep line from touching the blank. until till you get to the stiffest part of the blank with minimum bend.
|
Even 2 of the same exact blank can be slightly different as to where the best placement for guides is.
Once the tip has been installed correctly in reference to the blank spine, I usually attach the guides with rubber bands or tape to adjust positions so that the line never touches the blank. Sometimes, I will use electric tape for a more permanent temporary solution to try the rod out a few times fishing and see how it performs before installing the guides permanently with thread and varnish.
I had problems with ceramic inserts popping out of the guides when using the rod tubes on the Hobie Pro Anglers. I prefer to use Carboloy guides with the middle support for my kayak rods. The middle support makes the guides just a little more durable for the abuse they take while fishing on the kayak.
11-12-2023, 08:57 PM
Threaded Mode