Kayak Thru Hull Transducer - Kayak Fishing Adventures on Big Water’s Edge

peguinpower · 02-14-2009, 01:53 PM

Just finished the install today. First sunny day in socal in about a week.

FF now has 3 wires coming out. The power, tx and temp sensor.

Temp sensor was zip tied to the sail mast and glue with silicone to the hull bottom. It appears to respond well to ambient temps. The hull should be pretty responsive to ambient water temps. I did a test with a temp gun, there is a 1 degree differential between the FF readout and outside temp of the hull. Adjusted for offset in the FF menu. Spot on now

Last look at the tx, sea trials tomorrow. Gonna bring a pump

02-14-2009, 01:53 PM	#8
peguinpower bing! Join Date: Mar 2007 Location: socal Posts: 246	Just finished the install today. First sunny day in socal in about a week. FF now has 3 wires coming out. The power, tx and temp sensor. Temp sensor was zip tied to the sail mast and glue with silicone to the hull bottom. It appears to respond well to ambient temps. The hull should be pretty responsive to ambient water temps. I did a test with a temp gun, there is a 1 degree differential between the FF readout and outside temp of the hull. Adjusted for offset in the FF menu. Spot on now Last look at the tx, sea trials tomorrow. Gonna bring a pump Last edited by peguinpower; 02-14-2009 at 02:18 PM.