Transducer install Epoxy vs Pool Noodle - Kayak Fishing Adventures on Big Water’s Edge

flydigital · 10-28-2009, 05:40 PM

I've had no problem with the marine goop install. There will always be bubbles when applying the "puddle" but if you roll the transducer front and back, side to side about 5 times while pushing in the puddle the air bubbles will move to the sides out of the way and you'll get good readings. I've done this 3 times and always great results compared via different installs including in-the-water (liberator arm and transom mount) and other shoot-through installs. I've also seen failed installs and the results. Push and roll, it works...

10-28-2009, 05:40 PM	#5
flydigital Senior Member Join Date: Aug 2009 Posts: 192	I've had no problem with the marine goop install. There will always be bubbles when applying the "puddle" but if you roll the transducer front and back, side to side about 5 times while pushing in the puddle the air bubbles will move to the sides out of the way and you'll get good readings. I've done this 3 times and always great results compared via different installs including in-the-water (liberator arm and transom mount) and other shoot-through installs. I've also seen failed installs and the results. Push and roll, it works...