Share Your Innovations - Kayak Fishing Adventures on Big Water’s Edge

senojmj · 01-21-2010, 05:16 PM

Quote:

Originally Posted by Duke

Hey senojmj, what size pvc did you use to put inside the flush mount?

1 1/4 inch, it fits nice and snug. Be easy to make rod extenders too.

Iceman · 01-25-2010, 05:13 PM

water pick up thru tank scupper. This is a similar variation of the Hobie tank set up.

cut down a 90 male 1" thread to 3/4 hose elbow so it fits in the channel flush, the screw splits the opening in half to keep debri out.

Easily changed out to most kayaks.....skanky after rain bay water

Simple way of getting that thru hull set up with out drilling those big holes. A little forward momentum is all it takes to prime/ 6 volt kept prime and worked well.

01-25-2010, 05:13 PM	#2
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,948	water pick up thru tank scupper. This is a similar variation of the Hobie tank set up. cut down a 90 male 1" thread to 3/4 hose elbow so it fits in the channel flush, the screw splits the opening in half to keep debri out. Easily changed out to most kayaks.....skanky after rain bay water Simple way of getting that thru hull set up with out drilling those big holes. A little forward momentum is all it takes to prime/ 6 volt kept prime and worked well. __________________