Wire seals? - Kayak Fishing Adventures on Big Water’s Edge

Lets_Fish · 03-21-2011, 11:48 AM

Here is a link from West Marine for the part Andy mentioned. If you search "Wire Cap", you will find it.

http://www.westmarine.com/webapp/wcs...Most Popular|0

Oops, did not see that you are using the X-Wing. I have used the one shown on post #7, but I did goop mine so no water would leak below deck.

GregAndrew · 03-22-2011, 10:08 AM

You can put the bottom plastic part of the cable clam inside your yak if you have access. That will reduce the height maybe 3/8 inch or so.

03-21-2011, 11:48 AM	#1
Lets_Fish Senior Member Join Date: Oct 2009 Location: Wildomar, CA. Posts: 294	Here is a link from West Marine for the part Andy mentioned. If you search "Wire Cap", you will find it. http://www.westmarine.com/webapp/wcs...Most Popular\|0 Oops, did not see that you are using the X-Wing. I have used the one shown on post #7, but I did goop mine so no water would leak below deck.

03-22-2011, 10:08 AM	#2
GregAndrew Senior Member Join Date: Mar 2009 Posts: 2,384	You can put the bottom plastic part of the cable clam inside your yak if you have access. That will reduce the height maybe 3/8 inch or so.