adhesive question - Kayak Fishing Adventures on Big Water’s Edge

ericko · 04-19-2011, 10:44 PM

id say a motor is cheeper than a hole boat.

mrJB · 04-20-2011, 10:14 AM

To get your stickers (or velcro strips, etc.) to adhear to plastic, put a thin layer or two of contact cement on the hull, let dry, then afix your sticker, and you should be good to go for a semi-permanent application.

RoeBoat · 04-20-2011, 12:59 PM

thanks for the responses, guys. I have some extra goop so will give that a try. I like the idea of putting the sticker on the crate, making it a portable solution, but I'm pretty sure the CF number has to stay with the kayak I registered and can't be "shared" between kayaks.

04-20-2011, 10:14 AM	#2
mrJB Senior Member Join Date: Feb 2007 Location: O.C. Posts: 352	Adhearing to poly plastic... To get your stickers (or velcro strips, etc.) to adhear to plastic, put a thin layer or two of contact cement on the hull, let dry, then afix your sticker, and you should be good to go for a semi-permanent application. __________________ "I Brake for Halibut"

04-19-2011, 10:44 PM	#1
ericko Senior Member Join Date: Jun 2008 Location: Huntington beach Posts: 594	id say a motor is cheeper than a hole boat.

04-20-2011, 12:59 PM	#3
RoeBoat Member Join Date: Dec 2008 Location: Orange County Posts: 39	thanks for the responses, guys. I have some extra goop so will give that a try. I like the idea of putting the sticker on the crate, making it a portable solution, but I'm pretty sure the CF number has to stay with the kayak I registered and can't be "shared" between kayaks.