Question for you hds 5(x) users. - Kayak Fishing Adventures on Big Water’s Edge

GregAndrew · 04-26-2011, 03:27 PM

The manufacturer says that there is no concern at all for scratches and scrapes from dragging your yak. It only sticks out about 1/8 of an inch or less from the hull. The part of the kayak that is sandwiched in the unit is locked in very rigid. The hole you cut is 2 inches and the head unit and inside nut are about 3 inches. That gives you 1/2 inch of contact all the way around making it very solid and stable.

04-26-2011, 03:27 PM	#6
GregAndrew Senior Member Join Date: Mar 2009 Posts: 2,384	The manufacturer says that there is no concern at all for scratches and scrapes from dragging your yak. It only sticks out about 1/8 of an inch or less from the hull. The part of the kayak that is sandwiched in the unit is locked in very rigid. The hole you cut is 2 inches and the head unit and inside nut are about 3 inches. That gives you 1/2 inch of contact all the way around making it very solid and stable.