Hobie warranty question?? - Kayak Fishing Adventures on Big Water’s Edge

sandydiego · 05-06-2011, 08:36 AM

Give Hobie a call. They are good guys and will treat you fair. They might just sell you the replacement tank if that's all you need.

You can try to melt the seam back together using a screwdriver. Heat the screw driver with a torch and then use the hot tip to melt the plastic joint together. Repeat process until seam is rejoined. Start with a lower temp on the driver tip and increase the temp till you get the results you need. Good luck.

05-06-2011, 08:36 AM	#1
sandydiego Rum Pirate Join Date: Mar 2010 Location: Wilds of Mira Mesa Posts: 388	Give Hobie a call. They are good guys and will treat you fair. They might just sell you the replacement tank if that's all you need. You can try to melt the seam back together using a screwdriver. Heat the screw driver with a torch and then use the hot tip to melt the plastic joint together. Repeat process until seam is rejoined. Start with a lower temp on the driver tip and increase the temp till you get the results you need. Good luck.