![]() |
|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
Join Date: Mar 2009
Location: Menifee
Posts: 2,509
|
If you wouldn't mind, could you share how you modified the paddle to a SUP? I have an idea but wanted to see how you fared. Sorry for the thread jack!
__________________
”The beauty of the Second Amendment is that it will not be needed until they try to take it.” ~Thomas Jefferson.........maybe ![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Apr 2010
Posts: 175
|
No problem man, pretty simple stuff. Hacksaw to the half of the paddle that you don't use (the half with "the button") a few inches down from where the blade meets the handle, being sure to keep the cut square. Put the two pieces together and insert the t-handle into the cut-off end. Turn the t-handle until it sits right in relation to the blade and mark the fiberglass about where the button should come through. Measure it out and drill it to the appropriate size, I think somewhere around 3/8". I used a "step bit" to drill it so that the fiberglass didn't crack or get shredded. Works like a champ, didn't have to buy another paddle, and comes apart for transport and storage on the boat. Hope that helps.
|
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Mar 2009
Location: Menifee
Posts: 2,509
|
Awesome, Thanks!
![]() ![]()
__________________
”The beauty of the Second Amendment is that it will not be needed until they try to take it.” ~Thomas Jefferson.........maybe ![]() |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Apr 2011
Location: Menifee, CA
Posts: 1,474
|
Swivel seat? Where did you get that?
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Apr 2010
Posts: 175
|
|
![]() |
![]() |
![]() |
#6 |
Junior
Join Date: Jul 2011
Posts: 5
|
Look forward to picking it up on Tuesday. Thanks
EddieG 619-994-4537 |
![]() |
![]() |
![]() |
|
|