Spare parts bait tank - Kayak Fishing Adventures on Big Water’s Edge

MWC359 · 02-21-2012, 09:11 PM

I used an old 58 qt cooler and painted it to match my PA. I plumbed it with 3/4 pvc a back flow valve and a 500 gph pump. I took a couple plastic light fixture covers and rounded the corners of my cooler to prevent the bait from bashing their little skulls into the corners. I strengthend the corners by stuffing foam into the corners and siliconing over the top. The silicone didnt smooth out like i wanted....it was a little to cold that day..... but it will do the job I guess. This cooler fits perfect in the rear well of my PA. Im to cheap to pay for a hobie livewell

02-21-2012, 09:11 PM	#1
MWC359 Member Join Date: Jan 2012 Location: Corona Ca. Posts: 58	Spare parts bait tank I used an old 58 qt cooler and painted it to match my PA. I plumbed it with 3/4 pvc a back flow valve and a 500 gph pump. I took a couple plastic light fixture covers and rounded the corners of my cooler to prevent the bait from bashing their little skulls into the corners. I strengthend the corners by stuffing foam into the corners and siliconing over the top. The silicone didnt smooth out like i wanted....it was a little to cold that day..... but it will do the job I guess. This cooler fits perfect in the rear well of my PA. Im to cheap to pay for a hobie livewell