How do you break off a heavy line snag? - Kayak Fishing Adventures on Big Water’s Edge

Fiskadoro · 09-12-2010, 11:05 PM

Get right above it point your rod straight down so there is no load on it, and tighten your drag as much as you can. Then reel into it as far as you can easily.

Then watch the swells.

On the drop downswell reel it some more then grab the spool so the drag will not slip. As the next swell comes in it will lift you up several feet. If the line does not break reel into it again on the next downswell and grab the spool again when you get to the bottom, then let the next swell lift you up again. Repeat this process until it either pulls loose or breaks.

Don't grab the line just the reel spool as the line can cut your hands. they idea is to use your hand on the spool to shut down the reel and keep the drag from slipping and let the flotation of the yak and the power of the swell break the line for you.

With forty sometimes it's hard to get it to break. I get it as tight as I can then at the top of good swell while holding the spool I pull up the rod and reel straight up butt first against the line another foot or so. That usually breaks it off.

Don't ever cut your line or wrap it on sharp edge objects that can cut it. If you cut off the line you'll leave all that line in the water and it's just a hazard for others to hook up on. I hate hooking dead line at La Jolla, it's a hassle and completely avoidable if people would just use their heads and be more careful.

Jim

Stan K G · 09-12-2010, 11:40 PM

cutting fly line is a $45+ per event pricetag, so I'm the least likely person on the water to do so.

Fiskadoro · 09-12-2010, 11:57 PM

Quote:

Originally Posted by Stan K G

cutting fly line is a $45+ per event pricetag, so I'm the least likely person on the water to do so.

I hear that. The stuff is expensive. I have a fly fishing friend that jokes that with normal fishing you at least get something for your bucks, like an Accurate or Tiagra weighs something..with flyfishing everything is so light weight it's like you are spending your cash on air...

What weight line are you using?

I have a Sage 10-11 with some fast sinking fly line on it, fished but I'm the worlds worst flycaster so I hardly ever use it.

What are you fishing for?

Used to be there were some doable tipit class records for seabass open, and I think all the T shark fly records are still open.

Jim

Stan K G · 09-13-2010, 12:12 AM

8wt L3 custom rod, with a $40 freshwater basspro reel.

I'm going for anything I can get, and from the reel you can tell I'm too cheap to get the igfa leaders, I just use staight 20lb flouro when not in the surf.

Iceman · 09-13-2010, 07:35 AM

I usually wind down and use the swells as I thumb the spool with the rod pointed straight down and the reel just out of the water. Another way is to use a cleat or a RAM ball mount and wrap it a few turns and paddle a few strokes.

Jim Sammons LJKF · 09-13-2010, 10:09 AM

Good idea to also make sure your rod is leashed to the kayak when attempting because if the rod slips from your hands it will shoot straight down like a torpedo.

Regor · 09-13-2010, 11:28 AM

Quote:

Originally Posted by Jim Sammons LJKF

Good idea to also make sure your rod is leashed to the kayak when attempting because if the rod slips from your hands it will shoot straight down like a torpedo.

hmmmm ... sounds like a true life experience?

Fiskadoro · 09-13-2010, 12:16 PM

Quote:

Originally Posted by Jim Sammons LJKF

Good idea to also make sure your rod is leashed to the kayak when attempting because if the rod slips from your hands it will shoot straight down like a torpedo.

Been there. Never lost a rod but when your hands are wet and you have the spool locked up that surge wants to pull the rig right out of your hands.

Good advice Jim as usual.

Jim

dorado50 · 09-13-2010, 01:57 PM

Quote:

Originally Posted by Jim Day

Get right above it point your rod straight down so there is no load on it, and tighten your drag as much as you can. Then reel into it as far as you can easily.

Then watch the swells.

On the drop downswell reel it some more then grab the spool so the drag will not slip. As the next swell comes in it will lift you up several feet. If the line does not break reel into it again on the next downswell and grab the spool again when you get to the bottom, then let the next swell lift you up again. Repeat this process until it either pulls loose or breaks.

Don't grab the line just the reel spool as the line can cut your hands. they idea is to use your hand on the spool to shut down the reel and keep the drag from slipping and let the flotation of the yak and the power of the swell break the line for you.

With forty sometimes it's hard to get it to break. I get it as tight as I can then at the top of good swell while holding the spool I pull up the rod and reel straight up butt first against the line another foot or so. That usually breaks it off.

Don't ever cut your line or wrap it on sharp edge objects that can cut it. If you cut off the line you'll leave all that line in the water and it's just a hazard for others to hook up on. I hate hooking dead line at La Jolla, it's a hassle and completely avoidable if people would just use their heads and be more careful.

Jim

The last fews times I've been fishing in LJ there was'nt much of a swell so I could'nt use your swell technique! I got impatient waiting for a swell so I just cut my line(sorry about that). You have probably been hooking my cut lines, guess I'll have to re-think another method of retrieval.

GregAndrew · 09-13-2010, 06:10 PM

Not into flyfishing, but are those reels sturdy enough to thumb them to break the leader? Might also be able to wrap the line around the butt of your rod so you don't mess up your hands.

old_rookie · 09-13-2010, 07:03 PM

This is probably wrong but I got snagged twice on Saturday. I would get close to the snag spot, let out some line and then start wrapping it around the butt of my grip. Yeah it cut in a little as i pulled then wrapped it more then pulled and repeated this until it let loose. I often thought that once it lets go i might flip over so i pulled straight up instead of to the side. Kind of a workout. One time it broke the line just below the swivel the othe time I got it all back. I know that if I do this often I will loose the padding on the grip. Better than cutting up my hands. Using a rod leash is a good idea.

09-12-2010, 11:05 PM	#1
Fiskadoro ....... Join Date: Jan 2009 Posts: 1,509	Get right above it point your rod straight down so there is no load on it, and tighten your drag as much as you can. Then reel into it as far as you can easily. Then watch the swells. On the drop downswell reel it some more then grab the spool so the drag will not slip. As the next swell comes in it will lift you up several feet. If the line does not break reel into it again on the next downswell and grab the spool again when you get to the bottom, then let the next swell lift you up again. Repeat this process until it either pulls loose or breaks. Don't grab the line just the reel spool as the line can cut your hands. they idea is to use your hand on the spool to shut down the reel and keep the drag from slipping and let the flotation of the yak and the power of the swell break the line for you. With forty sometimes it's hard to get it to break. I get it as tight as I can then at the top of good swell while holding the spool I pull up the rod and reel straight up butt first against the line another foot or so. That usually breaks it off. Don't ever cut your line or wrap it on sharp edge objects that can cut it. If you cut off the line you'll leave all that line in the water and it's just a hazard for others to hook up on. I hate hooking dead line at La Jolla, it's a hassle and completely avoidable if people would just use their heads and be more careful. Jim Last edited by Fiskadoro; 09-12-2010 at 11:47 PM.

09-13-2010, 07:35 AM	#5
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,948	I usually wind down and use the swells as I thumb the spool with the rod pointed straight down and the reel just out of the water. Another way is to use a cleat or a RAM ball mount and wrap it a few turns and paddle a few strokes. __________________

09-13-2010, 10:09 AM	#6
Jim Sammons LJKF Senior Member Join Date: Mar 2005 Location: San Diego CA Posts: 947	Good idea to also make sure your rod is leashed to the kayak when attempting because if the rod slips from your hands it will shoot straight down like a torpedo. __________________ Jim Sammons La Jolla Kayak Fishing The Kayak Fishing Show JimSammons.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-12-2010, 11:40 PM	#2
Stan K G Banned Join Date: Sep 2010 Posts: 36	cutting fly line is a $45+ per event pricetag, so I'm the least likely person on the water to do so.

09-13-2010, 12:12 AM	#4
Stan K G Banned Join Date: Sep 2010 Posts: 36	8wt L3 custom rod, with a $40 freshwater basspro reel. I'm going for anything I can get, and from the reel you can tell I'm too cheap to get the igfa leaders, I just use staight 20lb flouro when not in the surf.

09-13-2010, 06:10 PM	#10
GregAndrew Senior Member Join Date: Mar 2009 Posts: 2,384	Not into flyfishing, but are those reels sturdy enough to thumb them to break the leader? Might also be able to wrap the line around the butt of your rod so you don't mess up your hands.

09-13-2010, 07:03 PM	#11
old_rookie Senior Member Join Date: Mar 2010 Location: Santee Posts: 904	This is probably wrong but I got snagged twice on Saturday. I would get close to the snag spot, let out some line and then start wrapping it around the butt of my grip. Yeah it cut in a little as i pulled then wrapped it more then pulled and repeated this until it let loose. I often thought that once it lets go i might flip over so i pulled straight up instead of to the side. Kind of a workout. One time it broke the line just below the swivel the othe time I got it all back. I know that if I do this often I will loose the padding on the grip. Better than cutting up my hands. Using a rod leash is a good idea.