Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion

Reply
 
Thread Tools Display Modes
Old 11-25-2010, 01:16 PM   #1
fishinkid2010
Senior Member
 
fishinkid2010's Avatar
 
Join Date: Nov 2008
Location: La Mesa
Posts: 386
I love my Hodgmans, I have owned two pairs. (neoprene; for salmon fishing and the guidlites; for kayaking) They held up very well.
The only brand I would avoid is Caddis. My pair of caddis waders leak pretty bad despite the numerous patches I have done. And their customer service... more like what customer service???
fishinkid2010 is offline   Reply With Quote
Old 11-25-2010, 01:19 PM   #2
StinkyMatt
Senior Member
 
StinkyMatt's Avatar
 
Join Date: Jun 2010
Location: Under a bridge
Posts: 2,169
Own two pairs, they both leak just a liiiiitle bit in the feet. Usually when I kayak I don't get any water into the feet. When I spend a significant amount of time with feet underwater I get a little moisure. Wash them regularly to avoid the SUPERSTINK!

They are inexpensive.
StinkyMatt is offline   Reply With Quote
Old 11-25-2010, 01:47 PM   #3
steveooo
Senior Member
 
steveooo's Avatar
 
Join Date: Sep 2005
Posts: 1,922
Any time I've had leaky waders, its usually due to pin pricks from a sabiki.

I did have one pair that had a seam split too.

I've had good success repairing both rips and holes by just dabbing a little Goop on the area, on the inside of the waders. The hard part is finding the leaky spot. If you know the general area where it is leaking, pour some rubbing alcohol on the outside, and look at the inside. It will be wet on the pinhole. Wait for that to dry, put a little Goop on it, wait a couple hours, Done. Much easier than rubber cement with a patch.


As for the stinky feet- Lysol disinfectant in a spray can works for me. Also letting them bake in the sun inside out for a couple hours helps too.
steveooo is offline   Reply With Quote
Old 11-28-2010, 06:31 AM   #4
Jzo
Senior Member
 
Jzo's Avatar
 
Join Date: Aug 2010
Posts: 344
Quote:
Originally Posted by steveooo View Post
I've had good success repairing both rips and holes by just dabbing a little Goop on the area, on the inside of the waders. The hard part is finding the leaky spot. If you know the general area where it is leaking, pour some rubbing alcohol on the outside, and look at the inside. It will be wet on the pinhole. Wait for that to dry, put a little Goop on it, wait a couple hours, Done. Much easier than rubber cement with a patch.


As for the stinky feet- Lysol disinfectant in a spray can works for me. Also letting them bake in the sun inside out for a couple hours helps too.
Great info, thx for sharing.
Jzo is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 05:05 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.