Tell me what you think guys - Kayak Fishing Adventures on Big Water’s Edge

roadx · 06-07-2012, 03:42 PM

thats a bad ass yak

x2 i would skip the down scan, i like mine, but!! if thats all it had i would be bummed fishing off LJ. get some thing with 83/200 khz

put a scotty flush mount on the other side, there cheap, and then you have the option of either left or right.
the sail mount is a pain, i didnt care for it. i suggest pick the non gaffing/casting side and add all your crap to that side. but still leave room to sit side saddle. goop it down to see if you like the location then permanently attach it.

have fun..... part of it is putting stuff where you like it

stop on by for a beer

JNAST13ST · 06-07-2012, 04:44 PM

Quote:

Originally Posted by roadx

thats a bad ass yak

x2 i would skip the down scan, i like mine, but!! if thats all it had i would be bummed fishing off LJ. get some thing with 83/200 khz

put a scotty flush mount on the other side, there cheap, and then you have the option of either left or right.
the sail mount is a pain, i didnt care for it. i suggest pick the non gaffing/casting side and add all your crap to that side. but still leave room to sit side saddle. goop it down to see if you like the location then permanently attach it.

have fun..... part of it is putting stuff where you like it

stop on by for a beer

yeah i thought about putting another one too.

roadx · 06-07-2012, 04:57 PM

come on over with the yak we'll have a couple beers and install it.

kobra · 06-07-2012, 08:24 PM

Welcome to the dark side. Congrats on your new ride.

JNAST13ST · 06-08-2012, 05:48 AM

Quote:

Originally Posted by kobra

Welcome to the dark side. Congrats on your new ride.

Thanks

Amish Ed · 06-08-2012, 08:58 AM

If you're going with the DSI, you might want to look at Mad Frog's Liberator. Mount it with a Scotty flush mount and you're good to go.

packeryakker · 06-08-2012, 04:46 PM

Amish Ed,I dig the mad frog setup just would be worried about the xducer getting wrapped up by shit in the water, does it give you any trouble?

packeryakker · 06-08-2012, 04:38 PM

Nice 2012, a turbo fin review would be much appreciated. I have the same boat looking to mount an elite 4 and saw this video looks interesting.

www.youtube.com/watch?v=Qe0HgUCPLlM

06-07-2012, 03:42 PM	#1
roadx . Join Date: May 2010 Posts: 1,155	thats a bad ass yak x2 i would skip the down scan, i like mine, but!! if thats all it had i would be bummed fishing off LJ. get some thing with 83/200 khz put a scotty flush mount on the other side, there cheap, and then you have the option of either left or right. the sail mount is a pain, i didnt care for it. i suggest pick the non gaffing/casting side and add all your crap to that side. but still leave room to sit side saddle. goop it down to see if you like the location then permanently attach it. have fun..... part of it is putting stuff where you like it stop on by for a beer __________________

06-07-2012, 04:57 PM	#3
roadx . Join Date: May 2010 Posts: 1,155	come on over with the yak we'll have a couple beers and install it. __________________

06-08-2012, 08:58 AM	#6
Amish Ed Senior Member Join Date: Jun 2005 Location: Grants Pass, OR Posts: 1,906	If you're going with the DSI, you might want to look at Mad Frog's Liberator. Mount it with a Scotty flush mount and you're good to go. __________________ Amish Ed You can't catch it again if it's dead!

06-07-2012, 08:24 PM	#4
kobra Senior Member Join Date: May 2005 Location: oceanside Posts: 880	Welcome to the dark side. Congrats on your new ride.

06-08-2012, 04:46 PM	#7
packeryakker Member Join Date: May 2012 Location: Victorville Posts: 61	Amish Ed,I dig the mad frog setup just would be worried about the xducer getting wrapped up by shit in the water, does it give you any trouble?

06-08-2012, 04:38 PM	#8
packeryakker Member Join Date: May 2012 Location: Victorville Posts: 61	Nice 2012, a turbo fin review would be much appreciated. I have the same boat looking to mount an elite 4 and saw this video looks interesting. www.youtube.com/watch?v=Qe0HgUCPLlM