PA 12 and Outback new option - Kayak Fishing Adventures on Big Water’s Edge

erinoo · 08-27-2012, 11:43 AM

Andy...Does Brent have any of those buckets for the pa 12..???

Iceman · 08-27-2012, 04:01 PM

buckets are 5" deep, here is another angle to show you how it will sit. The new 2013 even have the 4 corners dimpled to show you where to drill out.

Brent does not have em Eric, but I can get you one.

JNAST13ST · 08-27-2012, 06:26 PM

They don't have them at mission?

fishingfiend · 08-27-2012, 07:20 PM

Thanks for the picture! Do the center hatch screws at the 12/6 positions line up with the PA trim ring?

Iceman · 08-27-2012, 09:04 PM

It looks like those existing holes should line up. Once I get around to installing one I'll confirm.

walrus · 08-29-2012, 09:31 AM

Will it fit an Oasis, I keep looking at the pictures and looks like it might.

If the answer is "yes", will Mission Bay be able to install?

Matar · 08-29-2012, 11:48 AM

Got mine in the mail yesturday and the holes do not line up on mine at least. I have an 2010 model and the bunngie and tiedown plug lands right on the trim ring. I would have to cut the backing ring or cut out the molded in threads for it to work. I am going to try and lay the whole thing out tonight and see if it will work or not before i start cutting and let you guys know how is turns out. Also the lip on the backside of the round hatch with be cut out as the whole thing is bigger.

Rik · 09-11-2012, 01:48 PM

Quote:

Originally Posted by JNAST13ST

They don't have them at mission?

Nope, only Hobie Dealers can carry Hobie Parts.... We will have them at Oceanside when they are back in stock

Rik · 09-11-2012, 01:46 PM

Quote:

Originally Posted by erinoo

Andy...Does Brent have any of those buckets for the pa 12..???

We will have them at Oceanside when they are in stock. Hobie has them on back order as of today

08-27-2012, 04:01 PM	#2
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,948	buckets are 5" deep, here is another angle to show you how it will sit. The new 2013 even have the 4 corners dimpled to show you where to drill out. Brent does not have em Eric, but I can get you one. __________________

08-27-2012, 06:26 PM	#3
JNAST13ST Living Da Dream! Join Date: May 2012 Location: SAN DIEGO Posts: 414	They don't have them at mission? __________________ Don't tread on me

08-27-2012, 09:04 PM	#5
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,948	It looks like those existing holes should line up. Once I get around to installing one I'll confirm. __________________

08-27-2012, 11:43 AM	#1
erinoo Senior Member Join Date: Nov 2005 Location: Carlsbad,,Halfway up the Hill Posts: 487	Andy...Does Brent have any of those buckets for the pa 12..???

08-27-2012, 07:20 PM	#4
fishingfiend Senior Member Join Date: Feb 2012 Location: SoCal Posts: 196	Thanks for the picture! Do the center hatch screws at the 12/6 positions line up with the PA trim ring?

08-29-2012, 09:31 AM	#6
walrus Senior Member Join Date: Jul 2009 Location: Baja fish camp Posts: 478	Will it fit an Oasis, I keep looking at the pictures and looks like it might. If the answer is "yes", will Mission Bay be able to install?

08-29-2012, 11:48 AM	#7
Matar I am just me. Join Date: Jul 2011 Location: Lake Forest Posts: 135	Got mine in the mail yesturday and the holes do not line up on mine at least. I have an 2010 model and the bunngie and tiedown plug lands right on the trim ring. I would have to cut the backing ring or cut out the molded in threads for it to work. I am going to try and lay the whole thing out tonight and see if it will work or not before i start cutting and let you guys know how is turns out. Also the lip on the backside of the round hatch with be cut out as the whole thing is bigger.