Kraken----- - Kayak Fishing Adventures on Big Water’s Edge

MITCHELL · 03-06-2019, 05:08 AM

Clear probably doesn't show as bad maybe ill see if they fit through the hole in my iron.
Before I got the hobie welder, I patched my canoe heating up a butter knife with a propane torch, and put mesh that got the job done to, it was like cauterization of a wound and flattened out some bumps.

Hunters Pa · 03-06-2019, 07:28 AM

Quote:

Originally Posted by MITCHELL

Clear probably doesn't show as bad maybe ill see if they fit through the hole in my iron.
Before I got the hobie welder, I patched my canoe heating up a butter knife with a propane torch, and put mesh that got the job done to, it was like cauterization of a wound and flattened out some bumps.

Save any trimmings from installs of hatches or whatever. can also trim thin strips from inside underneath the hatch.

MITCHELL · 03-06-2019, 07:39 AM

It's thick and melts slow I thought about cutting it into strips I found my tin snips after I finished the job.
By the way best duck tape ever made is 622 shurtape I personally used to use it to mask new windows on building's. Put it on one time and take it off after finish. No glue residue from tape

03-06-2019, 05:08 AM	#1
MITCHELL Sea Hunter Join Date: Nov 2011 Location: Where ever I may roam where I lay my head I call home. Posts: 2,322	Zip ties is a good idea Clear probably doesn't show as bad maybe ill see if they fit through the hole in my iron. Before I got the hobie welder, I patched my canoe heating up a butter knife with a propane torch, and put mesh that got the job done to, it was like cauterization of a wound and flattened out some bumps. __________________ Duke Mitchell Last edited by MITCHELL; 03-06-2019 at 06:01 AM.

03-06-2019, 07:39 AM	#3
MITCHELL Sea Hunter Join Date: Nov 2011 Location: Where ever I may roam where I lay my head I call home. Posts: 2,322	I have blue cut outs from my old Malibu double It's thick and melts slow I thought about cutting it into strips I found my tin snips after I finished the job. By the way best duck tape ever made is 622 shurtape I personally used to use it to mask new windows on building's. Put it on one time and take it off after finish. No glue residue from tape __________________ Duke Mitchell Last edited by MITCHELL; 03-06-2019 at 05:17 PM.